Table of Contents
International Scholarly Research Notices
Volume 2014 (2014), Article ID 534953, 7 pages
http://dx.doi.org/10.1155/2014/534953
Research Article

Comparing in Cylinder Pressure Modelling of a DI Diesel Engine Fuelled on Alternative Fuel Using Two Tabulated Chemistry Approaches

1Faculty of Industrial Engineering, P.O. Box 2701, University of Douala, Douala, Cameroon
2National Advanced School of Engineering, P.O. Box 337, University of Yaounde, Yaounde, Cameroon
3Higher Institute of the Sahel, P.O. Box 46, University of Maroua, Maroua, Cameroon

Received 9 April 2014; Accepted 1 August 2014; Published 29 October 2014

Academic Editor: Xinqian Zheng

Copyright © 2014 Claude Valery Ngayihi Abbe et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. A. Lakshminarayanan and Y. V. Aghav, Modelling Diesel Combustion, Springer, Amsterdam, The Netherlands, 2010. View at Publisher · View at Google Scholar
  2. B. Challen and R. Baranescu, Diesel Engine Reference Book, Butterworth-Heinemann, Boston, Mass, USA, 2nd edition, 1999.
  3. N. F. Razleytsev, Combustion Simulation and Optimization in Diesels, Vischa Shkola, Kharkiv, Ukraine, 1980, (Russian).
  4. A. S. Lyshevsky, Fuel Atomization in Marine Diesels (In Russian), Leningrad, 1971.
  5. A. S. Kuleshov, “Multi-zone di diesel spray combustion model for thermodynamic simulation of engine with PCCI and high EGR level,” SAE International Journal of Engines, vol. 2, no. 1, pp. 1811–1834, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. H. O. Hardenberg and F. W. Hase, “An empirical formula for computing the pressure rise delay of a fuel from its cetane number and from the relevant parameters of direct-injection diesel engines,” SAE 790493, 1979. View at Google Scholar
  7. Y. Aghav, V. Thatte, M. Kumar et al., “Predicting ignition delay and HC emission for DI diesel engine encompassing EGR and oxygenated fuels,” Tech. Rep., SAE International, 2008. View at Publisher · View at Google Scholar
  8. O. Grondin, Modélisation du moteur à allumage par compression dans la perspective du contrôle et du diagnostic [Ph.D. thesis], Université de Rouen, Rouen, France, 2004.
  9. G. Woschni, “A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine,” SAE Technical Paper no. 670931, 1967. View at Publisher · View at Google Scholar
  10. R. B. Borman and G. L. Krieger, “The computation of apparent heat release for internal combustion,” in ASME 66-WA/DGP-4, ASME, 1966. View at Google Scholar
  11. J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, NY, USA, 1988.
  12. C. Olikara and G. Borman, “A computer program for calculating properties of equilibrium combustion products with some applications to I.C. engines,” SAE Technical Paper 750468, SAE International, 1975. View at Publisher · View at Google Scholar
  13. C. R. Ferguson and A. T. Kirkpatrick, Internal Combustion Engines: Applied Thermosciences, Wiley, New York, NY, USA, 2nd edition, 2000.
  14. E. M. Fisher, W. J. Pitz, H. J. Curran, and C. K. Westbrook, “Detailed chemical kinetic mechanisms for combustion of oxygenated fuels,” Proceedings of the Combustion Institute, vol. 28, no. 2, pp. 1579–1586, 2000. View at Publisher · View at Google Scholar
  15. NIST, JANAF Thermochemical Tables, NSRDS-NBS 37, 1971.
  16. D. R. Buttsworth, “Spark ignition internal combustion engine modeling using Matlab,” Faculty of Engineering & Surveying Technical Reports, University of Southern Queensland, Toowoomba, Australia, 2002. View at Google Scholar
  17. P. K. Sahoo and L. M. Das, “Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine,” Fuel, vol. 88, no. 6, pp. 994–999, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. X. Wang, H. Zuohua, A. K. Olawole, Z. Wu, and N. Keiya, “An experimental investigation on spray, ignition and combustion characteristics of biodiesels,” Proceedings of the Combustion Institute, vol. 11, pp. 2071–2077, 2011. View at Publisher · View at Google Scholar
  19. M. Lapuerta, O. Armas, and J. Rodriguez-Fernandez, “Effect of biodiesel fuels on diesel engine emissions,” Progress in Energy and Combustion Science, vol. 34, no. 2, pp. 198–223, 2007. View at Publisher · View at Google Scholar
  20. G. Knothe, J. V. Gerpen, and J. Krahl, The Biodiesel Handbook, AOCS Press, Champaign, Ill, USA, 2005.
  21. M. N. Azuwir, M. Z. Abdulmuin, and A. H. Adom, “Modelling and validation of automotive engine fuelled with palm oil biodiesel,” International Journal of Engineering and Technology, vol. 3, no. 6, pp. 582–586, 2011. View at Google Scholar
  22. B. Tesfa, R. Mishra, F. Gu, and A. D. Ball, “Combustion characteristics of CI engine running with biodiesel blends,” in Proceedings of the International Conference on Renewable Energies and Power Quality, Environment and Power Quality European Association for the Development of Renewable Energies, Las Palmas, Spain, 2011.