Review Article
Novel Technologies for Design and Analysis of Switching Mode Power-Supply Circuit Based on Solitary Electromagnetic Wave Theory
Table 2
Calculation condition.
| Appearance capacitance of etched aluminum foil | 33.9 μF/cm2 | Dielectric constant of alumina | 8.5 | Conductivity of conductive polymer | 12,000 S/m | Conductivity of carbon graphite | 72,727 S/m | Appearance ratio of capacitance | 0.8 | Shortening ratio of effective line length | 0.45 | Effective chip width | 1 mm | Effective chip length | 14 mm | Thickness of alumina layer on etching surface | 22.8 nm | Thickness of conductive polymer layer | 1 μm | Thickness of carbon graphite layer | 0.92 μm | Effective thickness of void in etching layer | 0.8 μm | Electromagnetic coupling between terminals | F/m |
|
|