Table of Contents
International Scholarly Research Notices
Volume 2014, Article ID 762561, 10 pages
http://dx.doi.org/10.1155/2014/762561
Research Article

Effect of Assembly Stresses on Fatigue Life of Symmetrical 65Si7 Leaf Springs

1Department of Mechanical Engineering, ITM University, Sector 23A, Gurgaon, Haryana 122017, India
2Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana 136019, India
3Department of Mechanical Engineering, YMCA University of Science &Technology, Faridabad, Haryana 121006, India

Received 13 March 2014; Accepted 1 May 2014; Published 4 August 2014

Academic Editor: T. Y. Kam

Copyright © 2014 Vinkel Kumar Arora et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. L. Aggarwal, R. A. Khan, and V. P. Agrawal, “Optimization of micro welds in leaf springs used in automotive vehicles,” Indian Journal of Engineering and Materials Sciences, vol. 13, no. 3, pp. 217–220, 2006. View at Google Scholar · View at Scopus
  2. M. L. Aggarwal, V. P. Agrawal, and R. A. Khan, “A stress approach model for predictions of fatigue life by shot peening of EN45A spring steel,” International Journal of Fatigue, vol. 28, no. 12, pp. 1845–1853, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Saelem, S. Chantranuwathana, K. Panichanun, P. Prempreeda, P. Wichienprakarn, and P. Kruo-ongarjnukool, “Experimental verification of leaf spring model by using a leaf spring test rig,” in Proceedings of the 23rd conference of Mechanical Engineering Network of Thailand, November 2009.
  4. J. J. Fuentes, H. J. Aguilar, J. A. Rodríguez, and E. J. Herrera, “Premature fracture in automobile leaf springs,” Engineering Failure Analysis, vol. 16, no. 2, pp. 648–665, 2008. View at Google Scholar · View at Scopus
  5. M. S. Kumar and S. Vijayarangan, “Analytical and experimental studies on fatigue life prediction of steel and composite multi-leaf springs for light passenger vehicles using life data analysis,” Materials Science, vol. 13, no. 2, pp. 141–146, 2007. View at Google Scholar
  6. M. M. Patunkar and D. R. Dolas, “Modelling and analysis of composite leaf spring under the static load condition by using FEA,” International Journal of Mechanical and Industrial Engineering, vol. 1, no. 1, pp. 1–4, 2011. View at Google Scholar
  7. IS, 1135, “Springs—Leaf Springs Assembly for Automobiles,” 1995.
  8. Spring Design Manual, “Design and application of leaf springs,” Tech. Rep. HS-744, AE-11, Society of Automotive Engineers, 1990. View at Google Scholar
  9. R. L. Norton, Machine Design—An Integrated Approach, pp. 366–383, Pearson Education, Asia, Hong Kong, 2nd edition, 2001.