Table of Contents
International Scholarly Research Notices
Volume 2014, Article ID 807043, 5 pages
http://dx.doi.org/10.1155/2014/807043
Research Article

Bone Glue Modified Asphalt: A Step towards Energy Conservation and Environment Friendly Modified Asphalts

Department of Civil Engineering, University of Louisiana at Lafayette, USA

Received 13 March 2014; Accepted 16 June 2014; Published 29 September 2014

Academic Editor: Wei Tang

Copyright © 2014 Hashim Raza Rizvi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Thompson and A. Hoiberg, Bituminous Materials: Asphalt Tars and Pitches, s.l.:Robert Krieger Publishing, New York, NY, USA, 1979.
  2. Y. Yildirim, “Polymer modified asphalt binders,” Construction and Building Materials, vol. 21, no. 1, pp. 66–72, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. G. King, Additives in Asphalt, Association of Asphalt Paving Technologists, 1999.
  4. R. Terrel and J. Walter, Modified Asphalt Pavement Materials, Association of Asphalt Paving Technologists, 1986.
  5. B. Brule, “Polymer-modified asphalt cements used in the road construction industry: basic principles,” Transportation Research Record, no. 1535, pp. 48–53, 1996. View at Google Scholar · View at Scopus
  6. J. Collins, “Thermoplastic block copolymers for the enhancement of asphaltic binders in paving applications,” in Proceedings of the Paving and Transportation Conference, Albuquerque, NM, USA, 1986.
  7. H. U. Bahia, D. Perdomo, and P. Turner, “Applicability of superpave binder testing protocols to modified binders,” Transportation Research Record, vol. 1586, no. 1, pp. 16–23, 1997. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Bates and R. Worch, Engineering Brief No. 39, Styrene-Butadiene Rubber Latex Modified Asphalt, FAA, Washington, DC, USA, 1987.
  9. M. J. Khattak and G. Y. Baladi, “Fatigue and permanent deformation models for polymer-modified asphalt mixtures,” Transportation Research Board Record, no. 1767, pp. 135–145, 2001. View at Google Scholar
  10. R. Corun, “Ohio Asphalt Paving Conference,” manager asphalt technical Services, NuStar Asphalt Refining, LLC, Columbus, Ohio, USA, 2009.
  11. F. Robert, P. Kandhel, and E. Brown, Hot Mix Asphalt Materials, Mixture Design, and Construction, NAPA Education Foundation, Lanham, Md, USA, 1996.
  12. Asphalt Institute and Eurobitume, The Bitumen Industry—A Global Perspective: Production, Chemistry, Use, Specification and Occupational Exposure, Asphalt Institute and Eurobitume, Lexington, Ky, USA, 2008.
  13. Asphalt Paving Industry: A Global Perspective, Global Series 101, National Asphalt Pavement Association (NAPA) and European Asphalt Pavement Association (EAPA), 2nd edition, 2011.