Table of Contents
ISRN Polymer Science
Volume 2014, Article ID 840397, 14 pages
http://dx.doi.org/10.1155/2014/840397
Research Article

Damping Evaluation of Linseed Oil-Based Engineering Elastomers by Vibration Response Method

1Department of Polymer Science and Technology, University of Calcutta, 92 A.P.C. Road, Kolkata 700009, India
2Precision Metrology Laboratory, Department of Mechanical Engineering, Sant Longowal Institute of Engineering & Technology, Sangrur, Punjab 148106, India

Received 21 November 2013; Accepted 16 January 2014; Published 23 February 2014

Academic Editors: B. Hazer and B. Kiskan

Copyright © 2014 Rakesh Das et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Barber, Handbook of Noise and Vibration Control, Elsevier advanced technology, 1992.
  2. D. I. G. Jones, Handbook of Viscoelastic Vibration Damping, Wiley, New York, NY, USA, 2001.
  3. A. D. Nashif, D. I. G. Jones, and J. P. Henderson, Vibration Damping, Wiley, 1985.
  4. Y. K. Kang, H. C. Park, J. Kim, and S.-B. Choi, “Interaction of active and passive vibration control of laminated composite beams with piezoceramic sensors/actuators,” Materials and Design, vol. 23, no. 3, pp. 277–286, 2002. View at Google Scholar · View at Scopus
  5. S. Raja, G. Prathap, and P. K. Sinha, “Active vibration control of composite sandwich beams with piezoelectric extension-bending and shear actuators,” Smart Materials and Structures, vol. 11, no. 1, pp. 63–71, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Caruso, S. Galeani, and L. Menini, “Active vibration control of an elastic plate using multiple piezoelectric sensors and actuators,” Simulation Modelling Practice and Theory, vol. 11, no. 5-6, pp. 403–419, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. J. A. Harris, “Design principles for vibration isolation and damping with elastomers including nonlinearity,” Rubber Chemistry and Technology, vol. 62, no. 3, pp. 515–528, 1989. View at Google Scholar · View at Scopus
  8. N. Yamada, S. Shoji, H. Sasaki et al., “Developments of high performance vibration absorber from poly (vinyl chloride)/chlorinated polyethylene/epoxidized natural rubber blend,” Journal of Applied Polymer Science, vol. 71, no. 6, pp. 855–863, 1999. View at Google Scholar · View at Scopus
  9. C.-L. Qin, W.-M. Cai, J. Cai, D.-Y. Tang, J.-S. Zhang, and M. Qin, “Damping properties and morphology of polyurethane/vinyl ester resin interpenetrating polymer network,” Materials Chemistry and Physics, vol. 85, no. 2-3, pp. 402–409, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Li, M. V. Hanson, and R. C. Larock, “Soybean oil-divinylbenzene thermosetting polymers: synthesis, structure, properties and their relationships,” Polymer, vol. 42, no. 4, pp. 1567–1579, 2001. View at Google Scholar · View at Scopus
  11. J. La Scala and R. P. Wool, “Property analysis of triglyceride-based thermosets,” Polymer, vol. 46, no. 1, pp. 61–69, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Lu and R. P. Wool, “Novel thermosetting resins for SMC applications from linseed oil: synthesis, characterization, and properties,” Journal of Applied Polymer Science, vol. 99, no. 5, pp. 2481–2488, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. S. N. Khot, J. J. Lascala, E. Can et al., “Development and application of triglyceride-based polymers and composites,” Journal of Applied Polymer Science, vol. 82, no. 3, pp. 703–723, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Lu and R. C. Larock, “New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization,” Biomacromolecules, vol. 8, no. 10, pp. 3108–3114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Lu and R. C. Larock, “Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties,” Biomacromolecules, vol. 9, no. 11, pp. 3332–3340, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Xia and R. C. Larock, “Vegetable oil-based polymeric materials: synthesis, properties, and applications,” Green Chemistry, vol. 12, no. 11, pp. 1893–1909, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. J. C. Ronda, G. Lligadas, M. Galià, and V. Cádiz, “Vegetable oils as platform chemicals for polymer synthesis,” European Journal of Lipid Science and Technology, vol. 113, no. 1, pp. 46–58, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Li and R. C. Larock, “New soybean oil-styrene-divinylbenzene thermosetting copolymers-IV. Good damping properties,” Polymers for Advanced Technologies, vol. 13, no. 6, pp. 436–449, 2002. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Li, J. Hasjim, and R. C. Larock, “Synthesis, structure, and thermophysical and mechanical properties of new polymers prepared by the cationic copolymerization of corn oil, styrene, and divinylbenzene,” Journal of Applied Polymer Science, vol. 90, no. 7, pp. 1830–1838, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Li, A. Perrenoud, and R. C. Larock, “Thermophysical and mechanical properties of novel polymers prepared by the cationic copolymerization of fish oils, styrene and divinylbenzene,” Polymer, vol. 42, no. 26, pp. 10133–10145, 2001. View at Publisher · View at Google Scholar · View at Scopus
  21. R. Das, R. Kumar, and P. P. Kundu, “Vibration damping characterization of linseed oil based elastomers for its effectiveness to attenuate structural vibration,” Journal of Applied Polymer Science, vol. 130, no. 5, pp. 3611–3623, 2013. View at Google Scholar
  22. C. Stenberg, M. Svensson, and M. Johansson, “A study of the drying of linseed oils with different fatty acid patterns using RTIR-spectroscopy and chemiluminescence (CL),” Industrial Crops and Products, vol. 21, no. 2, pp. 263–272, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. K. P. Menard, Dynamic mechanical analysis: a practical introduction, CRC press, 2008.
  24. L. E. Nielsen, Mechanical Properties of Polymers and Composites, Dekker, New York, NY, USA, 1974.
  25. W. De Silva, Vibration Damping, Control and Design, CRC Press, 2007.
  26. K. A. Alnefaie, S. M. Aldousari, and U. A. Khashaba, “New development of self damping MWCNT composites,” Composites A, vol. 52, pp. 1–11, 2013. View at Google Scholar
  27. J.-L. Wojtowicki, L. Jaouen, and R. Panneton, “New approach for the measurement of damping properties of materials using the Oberst beam,” Review of Scientific Instruments, vol. 75, no. 8, pp. 2569–2574, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. R. Pereira, J. P. Arenas, and E. Zumelzu, “Comparison of four test methods to measure damping properties of materials by using piezoelectric transducers,” Materials and Design, vol. 32, no. 4, pp. 2423–2428, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. ASTM E756-10, Standard Test Method for Measuring Vibration-Damping Properties of Materials, American Society for Testing and Materials, 2010.
  30. B. H. Hameed, L. F. Lai, and L. H. Chin, “Production of biodiesel from palm oil (Elaeis guineensis) using heterogeneous catalyst: an optimized process,” Fuel Processing Technology, vol. 90, no. 4, pp. 606–610, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Harris and A. G. Piersol, Harris' Shock and Vibration Handbook, McGraw-Hill, New York, NY, USA, 2002.
  32. H. F. Schnell, D. Göritz, and E. Schmid, “The influence of a new chemical cross-link system on the mechanical behaviour of aliphatic polyamides,” Journal of Materials Science, vol. 26, no. 3, pp. 661–668, 1991. View at Publisher · View at Google Scholar · View at Scopus
  33. T. A. C. Flipsen, R. Derks, H. Van Der Vegt, R. Stenekes, A. J. Pennings, and G. Hadziioannou, “Densely crosslinked polycarbosiloxanes. II: thermal and mechanical properties,” Journal of Polymer Science B, vol. 35, no. 9, pp. 1311–1331, 1997. View at Google Scholar · View at Scopus
  34. L. E. Nielsen and R. F. Landel, Mechanical Properties of Polymers and Composites, 1994.
  35. H. A. Kuhn, P. W. Lee, and T. Erturk, “A fracture criterion for cold forming,” Journal of Engineering Material Technology, vol. 1995, no. 4, pp. 213–218, 1973. View at Google Scholar
  36. Y. C. Chern, S. M. Tseng, and K. H. Hsieh, “Damping properties of interpenetrating polymer networks of polyurethane-modified epoxy and polyurethanes,” Journal of Applied Polymer Science, vol. 74, no. 2, pp. 328–335, 1999. View at Google Scholar · View at Scopus
  37. M. C. O. Chang, D. A. Thomas, and L. H. Sperling, “Group contribution analysis of the damping behavior of homopolymers, statistical copolymers, and interpenetrating polymer networks based on acrylic, vinyl, and styrenic mers,” Journal of Polymer Science B, vol. 26, no. 8, pp. 1627–1640, 1988. View at Google Scholar · View at Scopus
  38. Z. Li and M. J. Crocker, “Effects of thickness and delamination on the damping in honeycomb-foam sandwich beams,” Journal of Sound and Vibration, vol. 294, no. 3, pp. 473–485, 2006. View at Publisher · View at Google Scholar · View at Scopus
  39. A. C. Nilsson, “Wave propagation in and sound transmission through sandwich plates,” Journal of Sound and Vibration, vol. 138, no. 1, pp. 73–94, 1990. View at Google Scholar · View at Scopus
  40. D. L. Russel, “Remarks on experimental determination of modal damping rates in elastic beams,” in Vibration and Damping in Distributed Systems-WKB and Wave Methods, Visualization and Experimentation, G. Chen and J. Zhou, Eds., vol. 2, chapter 5, CRC Press, Toyko, Japan, 1993. View at Google Scholar
  41. M. P. Norton and D. G. Karczub, Fundamentals of Noise and Vibration Analysis for Engineers, Cambridge University Press, 2003.