Table of Contents
International Scholarly Research Notices
Volume 2014 (2014), Article ID 873215, 10 pages
http://dx.doi.org/10.1155/2014/873215
Research Article

Low Temperature Synthesis of Belite Cement Based on Silica Fume and Lime

1Chemistry Department, Faculty of Science, Minia University, Minia 61111, Egypt
2Chemistry Department, Faculty of Science, Al-Azhar University, Assiut 71524, Egypt

Received 17 May 2014; Revised 3 July 2014; Accepted 4 July 2014; Published 29 October 2014

Academic Editor: Tomasz Czujko

Copyright © 2014 M. A. Tantawy et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. P. Jackson, “Portland cement: classification and manufacture,” in Lea’s Chemistry of Cement and Concrete, P. C. Hewlett, Ed., p. 25, Butterworth-Heinemann, Oxford, UK, 4th edition, 2007. View at Google Scholar
  2. “EIPPCB (European Integrated Pollution Prevention and Control Bureau). Reference Document on Best Available Techniques in Cement, Lime and Magnesium Oxide Manufacturing Industries, European Commission,” 2010.
  3. J. F. Young and S. Mindess, Concrete, Prentice-Hall, Upper Saddle River, NJ, USA, 1981.
  4. E. Worrell, L. Price, N. Martin, C. Hendriks, and L. O. Meida, “Carbon dioxide emissions from the global cement industry,” Annual Review of Energy and the Environment, vol. 26, pp. 303–329, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. H. G. Van Oss and A. C. Padovani, “Cement manufacture and the environment. Part II. Environmental challenges and opportunities,” Journal of Industrial Ecology, vol. 7, no. 1, pp. 93–126, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. V. Johansen and T. V. Kouznetsova, “Clinker formation and new processes,” in Proceedings of the 9th International Congress on the Chemistry of Cement, New Delhi, India, 1992.
  7. E. Durgun, H. Manzano, R. J. M. Pellenq, and J. C. Grossman, “Understanding and controlling the reactivity of the calcium silicate phases from first principles,” Chemistry of Materials, vol. 24, no. 7, pp. 1262–1267, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Sakurada, A. K. Singh, T. M. Briere, M. Uzawa, and Y. Kawazoe, “Crystal structure analysis of dicalcium silicates by Ab-initio calculation,” in Proceedings of the 32nd Conference on Our World in Concrete and Structures, pp. 28–29, Singapore, 2007.
  9. X. J. Feng, X. M. Min, and C. X. Tao, “Study on the structure and characteristic of dicalcium silicate with quantum chemistry calculations,” Cement and Concrete Research, vol. 24, no. 7, pp. 1311–1316, 1994. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Telschow, Clinker burning kinetics and mechanism [Ph.D. thesis], Department of Chemical and Biochemical Engineering, Combustion and Harmful Emission Control Research Centre, Technical University of Denmark, 2012.
  11. G. C. Bye, Portland Cement Composition, Production and Preparation, Pergamon Press, Oxford, UK, 1st edition, 1983.
  12. H. F. Taylor, Cement Chemistry, Thomas Telford Publishing, London, UK, 2nd edition, 1997.
  13. C. J. Chan, W. M. Kriven, and J. F. Young, “Physical stabilization of the β-γ transformation in dicalcium silicate,” Journal of the American Ceramic Society, vol. 75, no. 6, pp. 1621–1627, 1992. View at Google Scholar
  14. V. K. Peterson, Diffraction investigations of cement and tricalcium silicate using Rietveld analysis [Ph.D. thesis], Department of Chemistry, Materials and Forensic Sciences University of Technology, Sydney, Australia, 2003.
  15. H. Ishida, K. Mabuch, K. Sasaki, and T. Mitsuda, “Low-temperature synthesis of β-Ca2SiO4 from hillebrandite,” Journal of the American Ceramic Society, vol. 75, no. 9, pp. 2427–2432, 1992. View at Google Scholar
  16. Y. Okada, K. Sasaki, B. Zhong, H. Ishida, and T. Mitsuda, “Formation processes of β-C2S by the decomposition of hydrothermally prepared C-S-H with Ca(OH)2,” Journal of the American Ceramic Society, vol. 77, no. 5, pp. 1319–1323, 1994. View at Publisher · View at Google Scholar · View at Scopus
  17. X. Hu, K. Yanagisawa, A. Onda, and K. Kajiyoshi, “Stability and phase relations of dicalcium silicate hydrates under hydrothermal conditions,” Journal of the Ceramic Society of Japan, vol. 114, no. 1326, pp. 174–179, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Sasaki, T. Masuda, H. Ishida, and T. Mitsuda, “Synthesis of calcium silicate hydrate with Ca/Si = 2 by mechanochemical treatment,” Journal of the American Ceramic Society, vol. 80, no. 2, pp. 472–476, 1997. View at Google Scholar · View at Scopus
  19. Y. Okada, H. Ishida, K. Sasaki, J. F. Young, and T. Mitsuda, “Characterization of C-S-H from highly reactive β-dicalcium silicate prepared from hillebrandite,” Journal of the American Ceramic Society, vol. 77, no. 5, pp. 1313–1318, 1994. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Miyazaki, S. Yamazaki, K. Sasaki, H. Ishida, and H. Toraya, “Crystallographic data of a new phase of dicalcium silicate,” Journal of the American Ceramic Society, vol. 81, no. 5, pp. 1339–1343, 1998. View at Google Scholar · View at Scopus
  21. H. Ishida, S. Yamazaki, K. Sasaki, Y. Okada, and T. Mitsuda, “α-Dicalcium silicate hydrate: Preparation, decomposed phase, and its hydration,” Journal of the American Ceramic Society, vol. 76, no. 7, pp. 1707–1712, 1993. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Sasaki, H. Ishida, Y. Okada, and T. Mitsuda, “Highly reactive β-dicalcium silicate: V, influence of specific surface area on hydration,” Journal of the American Ceramic Society, vol. 76, no. 4, pp. 870–874, 1993. View at Google Scholar
  23. H. Ishida, K. Sasaki, Y. Okada, and T. Mitsuda, “Highly reactive β-dicalcium silicate: III, hydration behavior at 40–80°C,” Journal of the American Ceramic Society, vol. 75, no. 9, pp. 2541–2546, 1992. View at Google Scholar
  24. H. Ishida, K. Sasaki, A. Mizuno, Y. Okada, and T. Mitsuda, “Highly reactive β-dicalcium silicate: IV, ball-milling and static hydration at room temperature,” Journal of the American Ceramic Society, vol. 75, no. 10, pp. 2779–2784, 1992. View at Google Scholar
  25. H. Ishida, K. Sasaki, and T. Mitsuda, “Highly reactive β-dicalcium silicate: I, hydration behavior at room temperature,” Journal of the American Ceramic Society, vol. 75, no. 2, pp. 353–358, 1992. View at Google Scholar
  26. F. A. Rodrigues and P. J. M. Monteiro, “Hydrothermal synthesis of cements from rice hull ash,” Journal of Materials Science Letters, vol. 18, no. 19, pp. 1551–1552, 1999. View at Publisher · View at Google Scholar · View at Scopus
  27. W. Jiang and D. M. Roy, “Hydrothermal processing of new fly ash cement,” American Ceramic Society Bulletin, vol. 71, no. 4, pp. 642–647, 1992. View at Google Scholar
  28. P. Arjunan, M. R. Silsbee, and D. M. Roy, “Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products,” Cement and Concrete Research, vol. 29, no. 8, pp. 1305–1311, 1999. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Öztürk, Y. Suyadal, and H. Oǧuz, “The formation of belite phase by using phosphogypsum and oil shale,” Cement and Concrete Research, vol. 30, no. 6, pp. 967–971, 2000. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Guerrero, S. Goñi, A. Macías, and M. P. Luxán, “Hydraulic activity and microstructural characterization of new fly ash-belite cements synthesized at different temperatures,” Journal of Materials Research, vol. 14, no. 6, pp. 2680–2687, 1999. View at Publisher · View at Google Scholar · View at Scopus
  31. K. Baltakys, R. Jauberthie, R. Siauciunas, and R. Kaminskas, “Influence of modification of SiO2 on the formation of calcium silicate hydrate,” Materials Science, vol. 25, no. 3, pp. 663–670, 2007. View at Google Scholar · View at Scopus
  32. F. A. Rodrigues, “Synthesis of cements from rice hull,” American Chemical Society, vol. 39, no. 2, pp. 30–31, 1999. View at Google Scholar
  33. H. Böke, Ö. Çizer, B. Ipekoǧlu, E. Uǧurlu, K. Şerifaki, and G. Toprak, “Characteristics of lime produced from limestone containing diatoms,” Construction and Building Materials, vol. 22, no. 5, pp. 866–874, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. C. A. S. Oliveira, A. G. Gumieri, A. M. Gomes, and W. L. Vasconcelos, “Characterization of magnesium slag aiming the utilization as a mineral admixture in mortar,” in International RILEM Conference on the Use of Recycled Materials in Building and Structures, pp. 919–924, 2004.
  35. W. Eitel, Silicate Science, Volume I: Silicate Structures, Academic Press, New York, NY, USA, 1964.
  36. M. Y. A. Mollah, W. Yu, R. Schennach, and D. L. Cocke, “Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate,” Cement and Concrete Research, vol. 30, no. 2, pp. 267–273, 2000. View at Publisher · View at Google Scholar · View at Scopus
  37. F. A. Rodrigues, “Synthesis of chemically and structurally modified dicalcium silicate,” Cement and Concrete Research, vol. 33, no. 6, pp. 823–827, 2003. View at Publisher · View at Google Scholar · View at Scopus