Table of Contents
ISRN Mechanical Engineering
Volume 2014, Article ID 968484, 8 pages
http://dx.doi.org/10.1155/2014/968484
Research Article

Cycle Time Reduction in Injection Molding Process by Selection of Robust Cooling Channel Design

1Mechanical Engineering Department, HITEC University, Taxila, Pakistan
2Department of Mechanical Engineering, Oakland University, Rochester, USA
3SMME, NUST, Islamabad, Pakistan

Received 18 January 2014; Accepted 2 March 2014; Published 25 March 2014

Academic Editors: A. Z. Sahin and X. Yang

Copyright © 2014 Muhammad Khan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Muhammad Khan, S. Kamran Afaq, Nizar Ullah Khan, and Saboor Ahmad, “Cycle Time Reduction in Injection Molding Process by Selection of Robust Cooling Channel Design,” ISRN Mechanical Engineering, vol. 2014, Article ID 968484, 8 pages, 2014. https://doi.org/10.1155/2014/968484.