Table of Contents
International Scholarly Research Notices
Volume 2015 (2015), Article ID 459246, 11 pages
http://dx.doi.org/10.1155/2015/459246
Research Article

Electrochemical Characterization and Determination of Phenol and Chlorophenols by Voltammetry at Single Wall Carbon Nanotube/Poly(3,4-ethylenedioxythiophene) Modified Screen Printed Carbon Electrode

1Department of Chemistry, Addis Ababa University, P.O. Box 1176, Addis Ababa, Ethiopia
2Department of Chemistry and Chemical Technology, National University of Lesotho, P.O. Roma 180, Roma, Lesotho

Received 15 July 2015; Accepted 13 October 2015

Academic Editor: Jinbo Bai

Copyright © 2015 Negussie Negash et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Ledru, N. Ruillé, and M. Boujtita, “One-step screen-printed electrode modified in its bulk with HRP based on direct electron transfer for hydrogen peroxide detection in flow injection mode,” Biosensors and Bioelectronics, vol. 21, no. 8, pp. 1591–1598, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. D.-W. Li, Y.-T. Li, W. Song, and Y.-T. Long, “Simultaneous determination of dihydroxybenzene isomers using disposable screen-printed electrode modified by multiwalled carbon nanotubes and gold nanoparticles,” Analytical Methods, vol. 2, no. 7, pp. 837–843, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. W.-J. Kim, S.-C. Chang, and Y.-B. Shim, “α-cyclodextrin modified screen printed graphite electrodes for detection of phenols,” Bulletin of the Korean Chemical Society, vol. 23, no. 3, pp. 427–431, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Khaled, H. N. A. Hassan, I. H. I. Habib, and R. Metelka, “Chitosan modified screen-printed carbon electrode for sensitive analysis of heavy metals,” International Journal of Electrochemical Science, vol. 5, no. 2, pp. 158–167, 2010. View at Google Scholar · View at Scopus
  5. L. K. Fatt, K. Chuenrangsikul, P. Rijiravanich, W. Surareungchai, and C. Y. Yean, “Preparation and performance test of a simplified screen-printed carbon electrode for use as a chronoamperometric transducer in genosensor,” Chiang Mai Journal of Science, vol. 39, no. 4, pp. 610–622, 2012. View at Google Scholar · View at Scopus
  6. M. Li, Y.-T. Li, D.-W. Li, and Y.-T. Long, “Recent developments and applications of screen-printed electrodes in environmental assays—a review,” Analytica Chimica Acta, vol. 734, pp. 31–44, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Moyo, J. O. Okonkwo, and N. M. Agyei, “Recent advances in polymeric materials used as electron mediators and immobilizing matrices in developing enzyme electrodes,” Sensors, vol. 12, no. 1, pp. 923–953, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. G. A. M. Mersal, “Electrochemical sensor for voltammetric determination of catechol based on screen printed graphite electrode,” International Journal of Electrochemical Science, vol. 4, no. 8, pp. 1167–1177, 2009. View at Google Scholar · View at Scopus
  9. M. Karim and H. J. Lee, “Amperometric phenol biosensor based on covalent immobilization of tyrosinase on Au nanoparticle modified screen printed carbon electrodes,” Talanta, vol. 116, pp. 991–996, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. R. O. Kadara, N. Jenkinson, and C. E. Banks, “Characterization and fabrication of disposable screen printed microelectrodes,” Electrochemistry Communications, vol. 11, no. 7, pp. 1377–1380, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Albareda-Sirvent, A. Merkoçi, and S. Alegret, “Configurations used in the design of screen-printed enzymatic biosensors. A review,” Sensors and Actuators, B: Chemical, vol. 69, no. 1, pp. 153–163, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Wang, “Nanomaterial-based electrochemical biosensors,” Analyst, vol. 130, no. 4, pp. 421–426, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. W.-Y. Su, S.-M. Wang, and S.-H. Cheng, “Electrochemically pretreated screen-printed carbon electrodes for the simultaneous determination of aminophenol isomers,” Journal of Electroanalytical Chemistry, vol. 651, no. 2, pp. 166–172, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. A. E. Böyükbayram, S. Kiralp, L. Toppare, and Y. Yağci, “Preparation of biosensors by immobilization of polyphenol oxidase in conducting copolymers and their use in determination of phenolic compounds in red wine,” Bioelectrochemistry, vol. 69, no. 2, pp. 164–171, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. W.-Y. Su and S.-H. Cheng, “Electrochemical oxidation and sensitive determination of acetaminophen in pharmaceuticals at Poly(3,4-ethylenedioxythiophene)-modified screen-printed electrodes,” Electroanalysis, vol. 22, no. 6, pp. 707–714, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Moczko, G. Istamboulie, C. Calas-Blanchard, R. Rouillon, and T. Noguer, “Biosensor employing screen-printed PEDOT:PSS for sensitive detection of phenolic compounds in water,” Journal of Polymer Science, Part A: Polymer Chemistry, vol. 50, no. 11, pp. 2286–2292, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Hu and S. Hu, “Carbon nanotube-based electrochemical sensors: principles and applications in biomedical systems,” Journal of Sensors, vol. 2009, Article ID 187615, 40 pages, 2009. View at Publisher · View at Google Scholar
  18. C. B. Jacobs, M. J. Peairs, and B. J. Venton, “Review: carbon nanotube based electrochemical sensors for biomolecules,” Analytica Chimica Acta, vol. 662, no. 2, pp. 105–127, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. S. K. Vashist, D. Zheng, K. Al-Rubeaan, J. H. T. Luong, and F.-S. Sheu, “Advances in carbon nanotube based electrochemical sensors for bioanalytical applications,” Biotechnology Advances, vol. 29, no. 2, pp. 169–188, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. J. P. Metters, M. Gomez-Mingot, J. Iniesta, R. O. Kadara, and C. E. Banks, “The fabrication of novel screen printed single-walled carbon nanotube electrodes: electroanalytical applications,” Sensors and Actuators B: Chemical, vol. 177, pp. 1043–1052, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. N. G. Sahoo, S. Rana, J. W. Cho, L. Li, and S. H. Chan, “Polymer nanocomposites based on functionalized carbon nanotbes,” Progress in Polymer Science, vol. 35, no. 7, pp. 837–867, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Spitalsky, D. Tasis, K. Papagelis, and C. Galiotis, “Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties,” Progress in Polymer Science, vol. 35, no. 3, pp. 357–401, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Goyal and S. Bishnoi, “Surface modification in electroanalysis: past, present and future,” Indian Journal of Chemistry Section A, vol. 51, pp. 205–225, 2012. View at Google Scholar
  24. N. Negash, H. Alemu, and M. Tessema, “Flow injection amperometric determination of phenol and chlorophenols at single wall carbon nanotubes modified glassy carbon electrode,” American Journal of Analytical Chemistry, vol. 5, no. 3, pp. 188–198, 2014. View at Publisher · View at Google Scholar
  25. N. Negash, H. Alemu, and M. Tessema, “Determination of phenol and chlorophenols at single-wall carbon nanotubes/poly(3,4-ethylenedioxythiophene) modified glassy carbon electrode using flow injection amperometry,” ISRN Analytical Chemistry, vol. 2014, Article ID 926213, 10 pages, 2014. View at Publisher · View at Google Scholar
  26. M. Li, Y.-T. Li, D.-W. Li, and Y.-T. Long, “Recent developments and applications of screen-printed electrodes in environmental assays: a review,” Analytica Chimica Acta, vol. 734, pp. 31–44, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. D.-M. Zhao, X.-H. Zhang, L.-J. Feng, L. Jia, and S.-F. Wang, “Simultaneous determination of hydroquinone and catechol at PASA/MWNTs composite film modified glassy carbon electrode,” Colloids and Surfaces B: Biointerfaces, vol. 74, no. 1, pp. 317–321, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. T. A. Enache and A. M. Oliveira-Brett, “Phenol and para-substituted phenols electrochemical oxidation pathways,” Journal of Electroanalytical Chemistry, vol. 655, no. 1, pp. 9–16, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Bard and L. Faulkner, Electrochemical Methods: Fundamentals and Applications, Wiley, New York, NY, USA, 2001.
  30. A. Remes, A. Pop, F. Manea, A. Baciu, S. J. Picken, and J. Schoonman, “Electrochemical determination of pentachlorophenol in water on a multi-wall carbon nanotubes-epoxy composite electrode,” Sensors, vol. 12, no. 6, pp. 7033–7046, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. R. Solna, S. Sapelnikova, P. Skládal et al., “Multienzyme electrochemical array sensor for determination of phenols and pesticides,” Talanta, vol. 65, no. 2, pp. 349–357, 2005. View at Publisher · View at Google Scholar
  32. S. Sapelnikova, E. Dock, R. Solná, P. Skládal, T. Ruzgas, and J. Emnéus, “Screen-printed multienzyme arrays for use in amperometric batch and flow systems,” Analytical and Bioanalytical Chemistry, vol. 376, no. 7, pp. 1098–1103, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Merkoçi, U. Anik, S. Çevik, M. Çubukçu, and M. Guixa, “Bismuth film combined with screen-printed electrode as biosensing platform for phenol detection,” Electroanalysis, vol. 22, no. 13, pp. 1429–1436, 2010. View at Publisher · View at Google Scholar · View at Scopus