Table of Contents
International Scholarly Research Notices
Volume 2015, Article ID 974020, 6 pages
http://dx.doi.org/10.1155/2015/974020
Research Article

Equivalent Air Spring Suspension Model for Quarter-Passive Model of Passenger Vehicles

1Department of Mechanical Engineering, Thi-Qar University, Nasiriyah, Iraq
2Department of Mechanical, Aerospace and Civil Engineering, Brunel University, Uxbridge UB8 3PH, UK
3Department of Mechanical Engineering, Basrah University, Basrah, Iraq

Received 15 January 2015; Revised 19 April 2015; Accepted 20 April 2015

Academic Editor: Majid Ghassemi

Copyright © 2015 Haider J. Abid et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. M. Zheng, L. H. Zhu, and N. D. D. Dong, “Investigation on on-off damping control law of vibration isolator,” in Proceedings of the International Conference on Mechanics and Materials Engineering (ICMME '14), pp. 176–182, Phuket Island,Thailand, October 2014.
  2. B. Chandekar and H. D. Lagdive, “Design of electro-hydraulic active suspension system for four wheel vehicles,” International Journal of Emerging Technology and Advanced Engineering, vol. 4, no. 4, pp. 885–889, 2014. View at Google Scholar
  3. D. P. Krishnasamy, J. Jayaraj, and D. John, “Experimental investigation on road vehicle active suspension,” Journal of Mechanical Engineering, vol. 59, no. 10, pp. 620–625, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. C. M. Harris and A. G. Piersol, Eds., Harris' Shock and Vibration Handbook, McGraw-Hill, New York, NY, USA, 5th edition, 2002.
  5. V. Gavriloski, E. Vetadzokoska, N. Babamov, and J. Jovanova, “Development of air spring dynamic model for vehicle suspension,” Mechanical Engineering—Scientific Journal, vol. 28, no. 2, pp. 89–94, 2009. View at Google Scholar
  6. M. Presthus, Derivation of air spring model parameters for train simulation [M.S. thesis], Lulea University of Technology, 2002.
  7. Air Suspension Conversion Systems, http://www.suncoreindustries.com/suspension-conversion-systems.php.
  8. (n.d.), October 2014, Suspension-Alternative.com, http://suspensionalternatives.wordpress.com.
  9. eCustomhitch, (n.d.), 2014, http://ecustomhitch.com.
  10. http://unityautomotive.co.
  11. Arnott Europe Air Suspension Products, 1989, https://www.arnotteurope.com.
  12. Air Left Suspension, Air Suspension, 1999, http://www.airsuspension.com.
  13. K. Toyofuku, C. Yamada, T. Kagawa, and T. Fujita, “Study on dynamic characteristic analysis of air spring with auxiliary chamber,” JSAE Review, vol. 20, no. 3, pp. 349–355, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Y. Bhave, “Effect of connecting the front and rear air suspensions of a vehicle on the transmissibility of road undulation inputs,” Vehicle System Dynamics, vol. 21, no. 4, pp. 225–245, 1992. View at Publisher · View at Google Scholar · View at Scopus
  15. D. A. Crolla and M. Ramsbottom, Development and Analysis of a Prototype Controllable Suspension, SI: Society of Automotive Engineers, Warrendale, Pa, USA, 1997.
  16. J. Xiao, B. T. Kulakowski, and M. Cao, “Active air-suspension design for transit buses,” International Journal of Heavy Vehicle Systems, vol. 14, no. 4, pp. 421–440, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Wu, W. Shangguan, and X. Pan, “Computational method for dynamic properties of rubber isolators using hyperelastic-viscoelastic-plastoelastic constitutive model,” Journal of Mechanical Engineering, vol. 46, no. 14, pp. 109–114, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. V. Bhandari and S. C. Subramanian, “Development of an electronically controlled pneumatic suspension for commercial vehicles,” in Proceedings of the IEEE International Conference on Power, Control and Embedded Systems (ICPCES '10), December 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Bruni, J. Vinolas, M. Berg, O. Polach, and S. Stichel, “Modelling of suspension components in a rail vehicle dynamics context,” Journal of Vehicle System Dyanmics, vol. 49, no. 7, pp. 1021–1072, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Liu and W. Z. Li, “Research on stiffness of air-spring with auxiliary chamber and its equivalent model,” in Proceedings of the 11th International Conference on Vibration Problems, Z. Dimitrovová, J. R. de Almeida, and R. Gonçalves, Eds., pp. 1–8, Lisbon, Portugal, 2013.
  21. S. Eaton, A Mathematical Model of a Nonlinear Pneumatic Suspension System, ABB Daimler-Benz Transportation (Rolling Stock), Berlin, Germany, 1997.
  22. D. Vannucci, G. Saporito, and M. Romani, “Wheel rail dynamic of DMU IC4 car for DSB: modelling of the effect of secondary air spring on calculation results and advanced analysis for controlling car body angle,” in Proceedings of the SIMPACK User Meeting, March 2006, http://www.simpack.com/fileadmin/simpack/doc/usermeeting06/um06_ansaldob-saporito.pdf.
  23. M. Berg, “A three-dimensional air spring model with friction and orifice damping,” in Proceedings of the 16th IA VSD Symposium, the Dynamics of Vehicles on Roads and on Tracks, Pretoria, South Africa, 1999.
  24. M. Berg, “An air spring model for dynamic analysis of rail vehicles,” TRITA-FKT Report 1999:32, Division of Railway Technology, Department of Vehicle Engineering, Royal Institute of Technology, Stockholm, Sweden, 1999. View at Google Scholar
  25. P. Sundvall, “Comparisons between predicted and measured ride comfort in trains—a case study on modeling,” TRITA-FKT Report, Division of Railway Technology, Department of Vehicle Engineering, Royal Institute of Technology, Stockholm, Sweden, 2001. View at Google Scholar
  26. S. Shahriar, Development and evaluation of a semi-active suspension system for full suspension tractors [Ph.D. thesis], Technische University Berlin, 2009.
  27. A. A. Aldair, Neurofuzzy controller based full vehicle nonlinear active suspension systems [Ph.D. thesis], School of Engineering and Informatics, University of Sussex, Brighton, UK, 2012.
  28. W. Sun, H. Gao, and O. Kaynak, “Finite frequency H control for vehicle active suspension systems,” IEEE Transactions on Control Systems Technology, vol. 19, no. 2, pp. 416–422, 2011. View at Publisher · View at Google Scholar · View at Scopus