Table of Contents
Journal of Artificial Evolution and Applications
Volume 2008, Article ID 574613, 14 pages
http://dx.doi.org/10.1155/2008/574613
Research Article

Inverse Parameter Identification Technique Using PSO Algorithm Applied to Geotechnical Modeling

1Labor für Bodenmechanik, Bauhaus-Universität Weimar, Coudraystraße 11 C, 99421 Weimar, Germany
2Dipartimento di Scienze della Terra, Università degli Studi di Modena e Reggio Emilia, Largo Sant' Eufemia 19, 41100 Modena, Italy

Received 24 July 2007; Accepted 14 January 2008

Academic Editor: Jim Kennedy

Copyright © 2008 Joerg Meier et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Calvello and R. J. Finno, “Calibration of soil models by inverse analysis,” in Numerical Models in Geomechanics NUMOG VIII, G. Pande and S. Pietruszczak, Eds., pp. 107–116, Balkema, Rotterdam, The Netherlands, 2002. View at Google Scholar
  2. M. Calvello and R. J. Finno, “Selecting parameters to optimize in model calibration by inverse analysis,” Computers and Geotechnics, vol. 31, no. 5, pp. 411–425, 2004. View at Publisher · View at Google Scholar
  3. J. Carrera, A. Alcolea, A. Medina, J. Hidalgo, and L. Slooten, “Inverse problem in hydrogeology,” Hydrogeological Journal, vol. 13, no. 1, pp. 206–222, 2005. View at Publisher · View at Google Scholar
  4. J. Meier, S. Rudolph, and T. Schanz, “Effektiver Algorithmus zur Lösung von inversen Aufgabenstellungen—Anwendung in der Geomechanik,” Bautechnik, vol. 83, no. 7, pp. 470–481, 2006. View at Publisher · View at Google Scholar
  5. T. Schanz, M. M. Zimmerer, M. Datcheva, and J. Meier, “Identification of constitutive parameters for numerical models via inverse approach,” Felsbau, vol. 24, no. 2, pp. 11–21, 2006. View at Google Scholar
  6. Z. F. Zhang, A. L. Ward, and G. W. Gee, “Estimating soil hydraulic parameters of a field drainage experiment using inverse techniques,” Vadose Zone Journal, vol. 2, no. 2, pp. 201–211, 2003. View at Google Scholar
  7. A. Ledesma, A. Gens, and E. E. Alonso, “Estimation of parameters in geotechnical backanalysis—I. Maximum likelihood approach,” Computers and Geotechnics, vol. 18, no. 1, pp. 1–27, 1996. View at Publisher · View at Google Scholar
  8. A. Gens, A. Ledesma, and E. E. Alonso, “Estimation of parameters in geotechnical backanalysis—II. Application to a tunnel excavation problem,” Computers and Geotechnics, vol. 18, no. 1, pp. 29–46, 1996. View at Publisher · View at Google Scholar
  9. A. Ledesma, A. Gens, and E. E. Alonso, “Parameter and variance estimation in geotechnical backanalysis using prior information,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 20, no. 2, pp. 119–141, 1996. View at Google Scholar
  10. Y. Malecot, E. Flavigny, and M. Boulon, “Inverse analysis of soil parameters for finite element simulation of geotechnical structures: pressuremeter test and excavation problem,” in Proceedings of the Symposium on Geotechnical Innovations, R. B. J. Brinkgreve, H. Schad, H. f. Schweiger, and E. Willand, Eds., pp. 659–675, Verlag Glückauf, Essen, Germany, 2004.
  11. S. Levasseur, Y. Malecot, M. Boulon, and E. Flavigny, “Soil parameter identification using a genetic algorithm,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 32, no. 2, pp. 189–213, 2007. View at Publisher · View at Google Scholar
  12. S. Levasseur, Y. Malecot, M. Boulon, and E. Flavigny, “Soil parameter identification from in situ measurements using a genetic algorithm and a principle component analysis,” in Proceedings of the 10th International Symposium on Numerical Models in Geomechanics (NUMOG '07), Rhodes, Greece, April 2007.
  13. X.-T. Feng, B.-R. Chen, C. Yang, H. Zhou, and X. Ding, “Identification of visco-elastic models for rocks using genetic programming coupled with the modified particle swarm optimization algorithm,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 5, pp. 789–801, 2006. View at Publisher · View at Google Scholar
  14. S. Finsterle, “Demonstration of optimization techniques for groundwater plume remediation using iTOUGH2,” Environmental Modelling & Software, vol. 21, no. 5, pp. 665–680, 2006. View at Publisher · View at Google Scholar
  15. L. Cui and D. Sheng, “Genetic algorithms in probabilistic finite element analysis of geotechnical problems,” Computers and Geotechnics, vol. 32, no. 8, pp. 555–563, 2005. View at Publisher · View at Google Scholar
  16. A. Cividini, L. Jurina, and G. Gioda, “Some aspects of ‘characterization’ problems in geomechanics,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 18, no. 6, pp. 487–503, 1981. View at Publisher · View at Google Scholar
  17. R. C. Eberhart and J. Kennedy, “A new optimizer using particle swarm theory,” in Proceedings of the 6th International Symposium on Micro Machine and Human Science (MHS '95), pp. 39–43, Nagoya, Japan, October 1995. View at Publisher · View at Google Scholar
  18. J. Kennedy and R. C. Eberhart, “Particle swarm optimization,” in Proceedings of the IEEE International Conference on Neural Networks, pp. 1942–1948, IEEE Press, Piscataway, NJ, USA, November-December 1995.
  19. B. F. J. Manly, Multivariate Statistical Methods: A Primer, Chapman & Hall/CRC, Boca Raton, Fla, USA, 3rd edition, 1944.
  20. J. Will, D. Roos, J. Riedel, and C. Bucher, “Robustness analysis in stochastic structural mechanics,” in NAFEMS Seminar: Use of Stochastics in FEM Analyses, Wiesbaden, Germany, May 2003.
  21. P. A. Vermeer and H. P. Neher, “A soft soil model that accounts for creep,” in Proceedings of the International Symposium. Beyond 2000 in Computational Geotechnics. 10 Years of PLAXIS Inetrnational, pp. 55–58, Balkema, Amsterdam, The Netherlands, March 1999.
  22. K.-J. Bathe, Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood-Cliffs, NJ, USA, 1982.
  23. K. Lemke, H. Lorenz, A. Klimitsch, J. Koeditz, T. Schaefer, and K. J. Witt, “Results of laboratory study on earthflow materials,” Material Research and Testing Institute MFPA, Weimar, Germany, 2006. View at Google Scholar
  24. M. Panizza, S. Silvano, A. Corsini et al., “Definizione della pericolosità e di possibili interventi di mitigazione della frana di Corvara in Badia. Provincia Autonoma di Bolzano—Alto Adige,” 2006, Autonome Provinz Bozen—Südtirol, http://www.provincia.bz.it/opere-idrauliche/attivita6_i.htm. View at Google Scholar
  25. A. Corsini, A. Pasuto, M. Soldati, and A. Zannoni, “Field monitoring of the Corvara landslide (Dolomites, Italy) and its relevance for hazard assessment,” Geomorphology, vol. 66, no. 1–4, pp. 149–165, 2005. View at Publisher · View at Google Scholar
  26. M. Soldati, A. Corsini, and A. Pasuto, “Landslides and climate change in the Italian Dolomites since the Late glacial,” Catena, vol. 55, no. 2, pp. 141–161, 2004. View at Publisher · View at Google Scholar
  27. A. Corsini, L'influenza dei fenomeni franosi sull'evoluzione geomorfologica post-glaciale dell'Alta Val Badia e della Valparola (Dolomiti), Ph.D. thesis, University of Bologna, Bologna, Italy, 2000.