Table of Contents
Journal of Computational Engineering
Volume 2017 (2017), Article ID 3169785, 14 pages
https://doi.org/10.1155/2017/3169785
Research Article

New Coordination Software for Parameter Identification Applied to Thermal Models of an Actuator Strut

1Chair for Technical Information Systems, Dresden University of Technology, 01062 Dresden, Germany
2Institute of Machine Tools and Control Engineering, Dresden University of Technology, 01062 Dresden, Germany

Correspondence should be addressed to Burkhard Hensel

Received 24 May 2017; Accepted 28 August 2017; Published 10 October 2017

Academic Editor: Damodar Maity

Copyright © 2017 Burkhard Hensel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Hensel and K. Kabitzsch, “Generator for modular virtual sensors,” in 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. https://de.mathworks.com/products/matlab.html.
  3. B. Hensel, T. Wagner, A. Gellrich, K. Kabitzsch, and B. Kauschinger, “Holistic ontology-based assistance system for efficient process model parameter identification,” Journal of Computational Engineering, vol. 2015, pp. 1–14, 2015. View at Publisher · View at Google Scholar
  4. B. Kauschinger and S. Schroeder, “Uncertain parameters in thermal machine-tool models and methods to design their metrological adjustment process,” Applied Mechanics and Materials, vol. 794, pp. 379–386, 2015. View at Publisher · View at Google Scholar
  5. T. S and P. Stoica, System Identification, Prentice Hall, Hemel Hempstead, UK, 1989.
  6. R. Isermann and M. Münchhof, Identification of Dynamic Systems, Springer, Berlin, Germany, 2011. View at Publisher · View at Google Scholar · View at MathSciNet
  7. M. Sanayei and P. Rohela, “Automated finite element model updating of full-scale structures with PARameter Identification System (PARIS),” Advances in Engineering Software, vol. 67, pp. 99–110, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Wernsing and C. Büskens, “Parameter identification for finite element based models in dry machining applications,” Procedia CIRP, vol. 31, pp. 328–333, 2015. View at Google Scholar · View at Scopus
  9. https://de.mathworks.com/products/sysid.html.
  10. https://de.mathworks.com/help/matlab/matlab-engine-api-for-java.html.
  11. http://www.jython.org/.
  12. G. Jungnickel, Simulation of thermal behavior of machine tools – Modelling and parameterization, Chair for Machine Tools, Dresden University of Technology, 2010.
  13. W. S. Levine, Ed., Control System Fundamentals, CRC Press, Boca Raton, Fl, USA, 2000. View at MathSciNet
  14. K. J. Åström and B. Wittenmark, Adaptive Control, Reading: Addison-Wesley Publishing Company, 1989.
  15. S. J. Qin, “An overview of subspace identification,” Computers and Chemical Engineering, vol. 30, no. 10-12, pp. 1502–1513, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Ding and L. Zhuang, “Parameter and state estimator for state space models,” The Scientific World Journal, vol. 2014, Article ID 106505, 2014. View at Publisher · View at Google Scholar · View at Scopus