Table of Contents
Journal of Ceramics
Volume 2013 (2013), Article ID 901375, 6 pages
http://dx.doi.org/10.1155/2013/901375
Research Article

Possibility of NiCuZn Ferrites Composition for Stress Sensor Applications

1Department of Physics, Changwon National University, Changwon 641773, Republic of Korea
2School of Advanced Sciences, VIT University, Vellore 632014, India
3School of Materials Science and Engineering, Harbin Institute of Technology, Shenzhen 518055, China
4Department of Materials Science and Nanotechnology, Yogi Vemana University, Kadapa 516227, India
5Department of Physics, Sri Krishnadevaraya University, Anantapur 515055, India

Received 5 November 2012; Accepted 10 December 2012

Academic Editor: Zhenxing Yue

Copyright © 2013 M. Penchal Reddy et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Mian and T. Yamaguchi, “Stress effect on the magnetization process in Ni-Cu-Zn ferrite in a weak field,” Journal of Magnetism and Magnetic Materials, vol. 68, pp. 351–357, 1987. View at Publisher · View at Google Scholar
  2. A. Biehkowski, “Ferrite,” in Proceedings of the ICF3, Center for Academic Publishers, Tokyo, Japan, 1981.
  3. J. Smit and H. P. Wijn, Ferrites, Philips Technical Library, Eindhoven, The Netherlands, 1959.
  4. A. Bierikowski, Acta IMEKO, p. 591, 1979.
  5. A. Bienkowski and J. Kulikowski, Prace ITR, vol. 97, p. 10, 1984.
  6. S. S. Shinde and K. M. Jadhav, “Bulk magnetic properties of cobalt ferrite doped with Si4+ ions,” Journal of Materials Science Letters, vol. 17, no. 10, pp. 849–851, 1998. View at Publisher · View at Google Scholar
  7. J. A. Paulsen, C. C. H. Lo, J. E. Snyder, A. P. Ring, L. L. Jones, and D. C. Jiles, “Study of the curie temperature of cobalt ferrite based composites for stress sensor applications,” IEEE Transactions on Magnetics, vol. 39, no. 5, pp. 3316–3318, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. J. A. Paulsen, A. P. Ring, C. C. H. Lo, J. E. Snyder, and D. C. Jiles, “Manganese-substituted cobalt ferrite magnetostrictive materials for magnetic stress sensor applications,” Journal of Applied Physics, vol. 97, no. 4, Article ID 044502, 3 pages, 2005. View at Publisher · View at Google Scholar
  9. O. Caltun, H. Chiriac, N. Lupu, I. Dumitru, and B. P. Rao, “High magnetostrictive doped cobalt ferrite,” Journal of Optoelectronics and Advanced Materials, vol. 9, no. 4, pp. 1158–1160, 2007. View at Google Scholar · View at Scopus
  10. O. F. Caltun, G. S. N. Rao, K. H. Rao et al., “High magnetostrictive cobalt ferrite for sensor applications,” Sensor Letters, vol. 5, no. 1, pp. 45–47, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. O. Caltun, I. Dumitru, M. Feder, N. Lupu, and H. Chiriac, “Substituted cobalt ferrites for sensors applications,” Journal of Magnetism and Magnetic Materials, vol. 320, no. 20, pp. e869–e873, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Brumfiel, “Magnetic effect sends physicists into a spin,” Nature, vol. 426, no. 6963, p. 110, 2003. View at Google Scholar · View at Scopus
  13. E. Hristoforou, “Magnetic effects in physical sensor design and development,” Journal of Optoelectronics and Advanced Materials, vol. 4, no. 2, pp. 245–260, 2002. View at Google Scholar · View at Scopus
  14. I. Bakonyi, B. L. Peter, V. Weihnacht, J. Toth, L. F. Kiss, and C. M. Schneider, “Giant magnetoresistance in electrodeposited multilayer films. The influence of superparamagnetic regions,” Journal of Optoelectronics and Advanced Materials, vol. 7, no. 2, pp. 589–598, 2005. View at Google Scholar
  15. V. Georgescu and M. Daub, “Magnetism and magnetoresistance in electrodeposited (L10) CoPt superlattices,” Journal of Optoelectronics and Advanced Materials, vol. 7, no. 2, pp. 853–858, 2005. View at Google Scholar · View at Scopus
  16. J. M. Barandiarán, M. L. Fdez-Gubieda, J. Gutiérrez, I. Orúe, A. G. Arribas, and G. V. Kurlyandskaya, “Magnetic films of technical interest prepared by pulsed laser deposition,” Journal of Optoelectronics and Advanced Materials, vol. 6, no. 2, pp. 565–574, 2004. View at Google Scholar · View at Scopus
  17. L. V. Panina, D. P. Makhnovskiy, and K. Mohri, “Magnetoimpedance in amorphous wires and multifunctional applications: from sensors to tunable artificial microwave materials,” Journal of Magnetism and Magnetic Materials, vol. 272, part 2, pp. 1452–1459, 2004. View at Publisher · View at Google Scholar
  18. H. C. Jiang, W. L. Zhang, W. X. Zhang, S. Q. Yang, and H. W. Zhang, “Influences of sputtering angles and annealing temperatures on the magnetic and magnet ostrictive performances of TbFe films,” Journal of Materials Science & Technology, vol. 21, no. 3, p. 315, 2005. View at Publisher · View at Google Scholar
  19. P. Ciureanu, G. Rudkowska, L. Clime, A. Sklyuyev, and A. Yelon, “Anisotropy optimization of giant magnetoimpedance sensors,” Journal of Optoelectronics and Advanced Materials, vol. 6, no. 3, pp. 905–910, 2004. View at Google Scholar · View at Scopus
  20. D. De Cos, A. García-Arribas, and J. M. Barandiarán, “Simplified electronic interfaces for sensors based on inductance changes,” Sensors and Actuators A, vol. 112, no. 2-3, pp. 302–307, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Boero, I. Utke, T. Bret et al., “Submicrometer Hall devices fabricated by focused electron-beam-induced deposition,” Applied Physics Letters, vol. 86, no. 4, Article ID 042503, 3 pages, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Chiriac, M. Tibu, V. Dobrea, and I. Murgulescu, “Thin magnetic amorphous wires for GMI sensor,” Journal of Optoelectronics and Advanced Materials, vol. 6, no. 2, pp. 647–650, 2004. View at Google Scholar
  23. A. Bienkowski and R. Szewczky, “new possibility of utilizing amorphous ring cores as stress sensor,” Physica Status Solidi A, vol. 189, no. 3, pp. 787–790, 2002. View at Google Scholar
  24. A. Bienkowski and J. Kulikowski, “The magneto-elastic Villari effect in ferrites,” Journal of Magnetism and Magnetic Materials, vol. 19, no. 1–3, pp. 120–122, 1980. View at Publisher · View at Google Scholar
  25. N. R. Reddy, M. V. Ramana, G. Rajitha, E. Rajagopal, K. V. Sivakumar, and V. R. K. Murthy, “Stress sensitivity of inductance in NiCuZn ferrites,” Journal of Magnetism and Magnetic Materials, vol. 292, pp. 159–163, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Varalaxmi, N. R. Reddy, M. V. Ramana et al., “Stress sensitivity of inductance in NiMgCuZn ferrites and development of a stress insensitive ferrite composition for microinductors,” Journal of Materials Science: Materials in Electronics, vol. 19, pp. 399–405, 2008. View at Publisher · View at Google Scholar
  27. N. Varalaxmi and D. Ph, [Ph.D. thesis], Sri Krishnadevaraya University, Anantapur, India, 2007.
  28. U. R. Lima, M. C. Nasar, R. S. Nasar, M. C. Rezende, J. H. Araujo, and J. F. Olivera, “Synthesis of NiCuZn ferrite nanoparticles and microwave absorption characterization,” Materials Science and Engineering B, vol. 151, no. 3, pp. 238–242, 2008. View at Publisher · View at Google Scholar
  29. S. I. Pyun and J. T. Baek, “Microstructural dependence of permeability and permeability spectra in Ni-Zn ferrites,” American Ceramic Society Bulletin, vol. 64, no. 4, pp. 602–605, 1985. View at Google Scholar · View at Scopus
  30. T. Y. Byun, S. C. Byeon, K. S. Hong, and C. K. Kim, “Factors affecting initial permeability of Co-substituted Ni-Zn-Cu ferrites,” IEEE Transactions on Magnetics, vol. 35, no. 5, pp. 3445–3447, 1999. View at Publisher · View at Google Scholar
  31. U. B. Deshmukh, S. M. Kabbur, N. D. Chaudhari, S. R. Sawant, and S. Suryavansi, in Proceedings of the National Conference on Electronic Materials Devices and Systems (NCEMDS '99), p. 231, Gulbarga, India, 1999.
  32. J. Loaec, “Thermal hysteresis of the initial permeability of soft ferrites at transition temperatures,” Journal of Physics D, vol. 26, no. 6, p. 963. View at Publisher · View at Google Scholar
  33. C. Y. Tsay, K. S. Liu, and I. N. Lin, “Microwave sintering of (Bi0.75Ca1.2Y1.05)(V0.6Fe4.4)O12 microwave magnetic materials,” Journal of the European Ceramic Society, vol. 24, no. 6, pp. 1057–1061, 2004. View at Publisher · View at Google Scholar
  34. A. Globus, P. Duplex, and M. Guyot, “Determination of initial magnetization curve from crystallites size and effective anisotropy field,” IEEE Transactions on Magnetics, vol. 7, no. 3, p. 617, 1971. View at Publisher · View at Google Scholar
  35. O. F. Caltun, L. Spinub, A. L. Stancua, L. D. Thungb, and W. Zhou, “Study of the microstructure and of the permeability spectra of Ni-Zn-Cu ferrites,” Journal of Magnetism and Magnetic Materials, vol. 242–245, pp. 160–162, 2002. View at Publisher · View at Google Scholar
  36. G. Baca, R. Valenzuela, M. A. Escobar, and L. F. Magaña, “Temperature dependence of the critical magnetic field in polycrystalline ferrites,” Journal of Applied Physics, vol. 57, no. 8, pp. 4183–4185, 1985. View at Publisher · View at Google Scholar · View at Scopus
  37. T. Y. Byun, S. C. Bycon, and K. S. Hong, “Factors affecting initial permeability of Co-substituted Ni-Zn-Cu ferrites,” IEEE Transactions on Magnetics, vol. 35, no. 5, pp. 3445–3447, 1999. View at Publisher · View at Google Scholar
  38. M. Guyot and A. Globus, “wall displacement and bulging in magnetization mechanisms of the hysteresis loop,” Physica Status Solidi B, vol. 52, no. 2, pp. 427–431, 1972. View at Publisher · View at Google Scholar
  39. I. Kanada, T. Murse, and T. Nomura, “Effect of chemical composition and microstructure on stress sensitivity of ferrite,” Journal of the Japan Society of Powder and Powder Metallurgy, vol. 48, pp. 135–139, 2001. View at Publisher · View at Google Scholar