Table of Contents
Journal of Ceramics
Volume 2014, Article ID 169748, 9 pages
http://dx.doi.org/10.1155/2014/169748
Research Article

Modeling of Thermal and Mechanical Behavior of ZrB2-SiC Ceramics after High Temperature Oxidation

1Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409-0050, USA
2Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409-0340, USA

Received 31 July 2014; Accepted 18 October 2014; Published 11 November 2014

Academic Editor: Guillaume Bernard-Granger

Copyright © 2014 Jun Wei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. M. Opeka, I. G. Talmy, and J. A. Zaykoski, “Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: theoretical considerations and historical experience,” Journal of Materials Science, vol. 39, no. 19, pp. 5887–5904, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. W. G. Fahrenholtz, G. E. Hilmas, A. L. Chamberlain, and J. W. Zimmermann, “Processing and characterization of ZrB2-based ultra-high temperature monolithic and fibrous monolithic ceramics,” Journal of Materials Science, vol. 39, no. 19, pp. 5951–5957, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. W. G. Fahrenholtz, “Thermodynamic analysis of ZrB2-SiC oxidation: formation of a SiC-depleted region,” Journal of the American Ceramic Society, vol. 90, no. 1, pp. 143–148, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. C. M. Carney, P. Mogilvesky, and T. A. Parthasarathy, “Oxidation behavior of zirconium diboride silicon carbide produced by the spark plasma sintering method,” Journal of the American Ceramic Society, vol. 92, no. 9, pp. 2046–2052, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. W. G. Fahrenholtz, “The ZrB2 volatility diagram,” Journal of the American Ceramic Society, vol. 88, no. 12, pp. 3509–3512, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Rezaie, W. G. Fahrenholtz, and G. E. Hilmas, “Evolution of structure during the oxidation of zirconium diboride-silicon carbide in air up to 1500°C,” Journal of the European Ceramic Society, vol. 27, no. 6, pp. 2495–2501, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. T. A. Parthasarathy, R. A. Rapp, M. Opeka, and M. K. Cinibulk, “Modeling oxidation kinetics of SiC-containing refractory diborides,” Journal of the American Ceramic Society, vol. 95, no. 1, pp. 338–349, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. S. R. Levine, E. J. Opila, M. C. Halbig, J. D. Kiser, M. Singh, and J. A. Salem, “Evaluation of ultra-high temperature ceramics for aeropropulsion use,” Journal of the European Ceramic Society, vol. 22, no. 14-15, pp. 2757–2767, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. J. C. Han, P. Hu, X. Zhang, S. Meng, and W. Han, “Oxidation-resistant ZrB2-SiC composites at 2200°C,” Composites Science and Technology, vol. 68, no. 3-4, pp. 799–806, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. X.-H. Zhang, P. Hu, and J.-C. Han, “Structure evolution of ZrB2-SiC during the oxidation in air,” Journal of Materials Research, vol. 23, no. 7, pp. 1961–1972, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Hu, W. Guolin, and Z. Wang, “Oxidation mechanism and resistance of ZrB2-SiC composites,” Corrosion Science, vol. 51, no. 11, pp. 2724–2732, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Sarin, P. E. Driemeyer, R. P. Haggerty et al., “In situ studies of oxidation of ZrB2 and ZrB2–SiC composites at high temperatures,” Journal of the European Ceramic Society, vol. 30, no. 11, pp. 2375–2386, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. “Material Property Database (MPDB),” JAHM Software, Inc., http://www.jahm.com.
  14. I. Barin, Thermochemical Data of Pure Substances, Wiley-VCH, New York, NY, USA, 3rd edition, 1995.
  15. J. Wei, L. R. Dharani, K. Chandrashekhara, G. E. Hilmas, and W. G. Fahrenholtz, “Modeling of oxidation effects on heat transfer behavior of ZrB2 and ZrB2-SiC Ceramics at high temperature,” in Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, Honolulu, Hawaii, USA, April 2012. View at Scopus
  16. J. O. Hirschfelder, C. F. Curtiss, and R. B. Bird, Molecular Theory of Gases and Liquid, John Wiley & Sons, New York, NY, USA, 1954.
  17. R. S. Hixson, M. A. Winkler, and J. W. Shaner, “Sound speed measurements in liquid lead at high temperature and pressure,” in Conference: 10. High Pressure Conference on Research in High Pressure Science and Technology, Amsterdam, The Netherlands, 1985, LA-UR-85-2363.
  18. M. S. Ghiorso, “An equation of state for silicate melts. I. Formulation of a general model,” American Journal of Science, vol. 304, no. 8-9, pp. 637–678, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Polian, V.-T. Dung, and P. Richet, “Elastic properties of a-SiO2 up to 2300 K from Brillouin scattering measurements,” Europhysics Letters, vol. 57, no. 3, pp. 375–381, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. 2013, https://en.wikipedia.org/wiki/Speed_of_sound.
  21. D. D. Joseph, A. Narain, and O. Riccius, “Shear-wave speeds and elastic moduli for different liquids. Part 1. Theory,” Journal of Fluid Mechanics, vol. 171, pp. 289–308, 1986. View at Publisher · View at Google Scholar · View at Scopus
  22. D. D. Joseph, O. Riccius, and M. Arney, “Shear-wave speeds and elastic moduli for different liquids. Part 2: experiments,” Journal of Fluid Mechanics, vol. 171, pp. 309–338, 1986. View at Publisher · View at Google Scholar · View at Scopus
  23. O. Riccius, D. D. Joseph, and M. Arney, “Shear-wave speeds and elastic moduli for different liquids Part 3. Experiments-update,” Rheologica Acta, vol. 26, no. 1, pp. 96–99, 1987. View at Publisher · View at Google Scholar · View at Scopus
  24. M. S. Greenwood and J. A. Bamberger, “Measurement of viscosity and shear wave velocity of a liquid or slurry for on-line process control,” Ultrasonics, vol. 39, no. 9, pp. 623–630, 2002. View at Publisher · View at Google Scholar · View at Scopus
  25. “ABAQUS 6.9 documentation,” http://www.simulia.com/support/documentation.html.
  26. W. N. Sharpe Jr., J. Pulskamp, D. S. Gianola, C. Eberl, R. G. Polcawich, and R. J. Thompson, “Strain measurements of silicon dioxide microspecimens by digital imaging processing,” Experimental Mechanics, vol. 47, no. 5, pp. 649–658, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. http://www.ferroceramic.com/zirconia.htm.
  28. D. Kalish, E. V. Clougherty, and K. Kreder, “Strength, fracture mode, and thermal stress resistance of HfB2 and ZrB2,” Journal of the American Ceramic Society, vol. 52, no. 1, pp. 30–36, 1969. View at Google Scholar
  29. A. L. Chamberlain, W. G. Fahrenholtz, G. E. Hilmas, and D. T. Ellerby, “High-strength zirconium diboride-based ceramics,” Journal of the American Ceramic Society, vol. 87, no. 6, pp. 1170–1172, 2004. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Rezaie, W. G. Fahrenholtz, and G. E. Hilmas, “Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2-SiC,” Journal of Materials Science, vol. 42, no. 8, pp. 2735–2744, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Zhu, W. G. Fahrenholtz, and G. E. Hilmas, “Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride-silicon carbide ceramics,” Journal of the European Ceramic Society, vol. 27, no. 4, pp. 2077–2083, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Watts, G. Hilmas, W. G. Fahrenholtz, D. Brown, and B. Clausen, “Measurement of thermal residual stresses in ZrB2-SiC composites,” Journal of the European Ceramic Society, vol. 31, no. 9, pp. 1811–1820, 2011. View at Publisher · View at Google Scholar · View at Scopus