Table of Contents
Journal of Ceramics
Volume 2014, Article ID 370851, 6 pages
http://dx.doi.org/10.1155/2014/370851
Research Article

Preparation of Stable ZrB2-SiC-B4C Aqueous Suspension for Composite Based Coating: Effect of Solid Content and Dispersant on Stability

1Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box 1411713116, Tehran, Iran
2Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB, Canada T6G 2V4
3School of Engineering, Shahid Rajaee University, P.O. Box 16785-136, Tehran, Iran

Received 26 February 2014; Revised 5 August 2014; Accepted 24 August 2014; Published 7 September 2014

Academic Editor: Keizo Uematsu

Copyright © 2014 Mehri Mashadi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. R. Levine, E. J. Opila, M. C. Halbig, J. D. Kiser, M. Singh, and J. A. Salem, “Evaluation of ultra-high temperature ceramics for aeropropulsion use,” Journal of the European Ceramic Society, vol. 22, no. 14-15, pp. 2757–2767, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. M. M. Opeka, I. G. Talmy, and J. A. Zaykoski, “Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: Theoretical considerations and historical experience,” Journal of Materials Science, vol. 39, no. 19, pp. 5887–5904, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. D. M. van Wie, D. G. Drewry Jr., D. E. King, and C. M. Hudson, “The hypersonic environment: required operating conditions and design challenges,” Journal of Materials Science, vol. 39, no. 19, pp. 5915–5924, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Kumar, “Self-propagating high temperature synthesis of refractory nitrides, carbides and borides,” Key Engineering Materials, vol. 56, pp. 183–188, 1991. View at Google Scholar
  5. K. Upadhya, J.-M. Yang, and W. P. Hoffman, “Materials for ultrahigh temperature structural applications,” The American Ceramic Society Bulletin, vol. 76, no. 12, pp. 51–56, 1997. View at Google Scholar · View at Scopus
  6. M. M. Opeka, I. G. Talmy, E. J. Wuchina, J. A. Zaykoski, and S. J. Causey, “Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds,” Journal of the European Ceramic Society, vol. 19, no. 13-14, pp. 2405–2414, 1999. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Yan, H. Zhang, Z. Huang, J. Liu, and D. Jiang, “In situ synthesis of ultrafine ZrB2-SiC composite powders and the pressureless sintering behaviors,” Journal of the American Ceramic Society, vol. 91, no. 4, pp. 1372–1376, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. S.-H. Lee, Y. Sakka, and Y. Kagawa, “Dispersion behavior of ZrB2 powder in aqueous solution,” Journal of the American Ceramic Society, vol. 90, no. 11, pp. 3455–3459, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Zhang, Y. J. Yan, Z. Huang, X. Liu, and D. Jiang, “Pressureless sintering of ZrB2-SiC ceramics incorporating sol-gel synthesized ultra-fine ceramic powders,” Key Engineering Materials, vol. 434-435, pp. 193–196, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. D. W. Ni, G. J. Zhang, Y. M. Kan, and Y. Sakka, “Highly textured ZrB2-based ultrahigh temperature ceramics via strong magnetic field alignment,” Scripta Materialia, vol. 60, no. 8, pp. 615–618, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Monteverde and A. Bellosi, “Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates,” Solid State Sciences, vol. 7, no. 5, pp. 622–630, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Yan, Z. Huang, S. Dong, and D. Jiang, “Pressureless sintering of high-density ZrB2-SiC ceramic composites,” Journal of the American Ceramic Society, vol. 89, no. 11, pp. 3589–3592, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Zhu, W. G. Fahrenholtz, and G. E. Hilmas, “Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride-silicon carbide ceramics,” Journal of the European Ceramic Society, vol. 27, no. 4, pp. 2077–2083, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. S. S. Hwang, A. L. Vasiliev, and N. P. Padture, “Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids,” Materials Science and Engineering A, vol. 464, no. 1-2, pp. 216–224, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Han, P. Hu, X. Zhang, and S. Meng, “Oxidation behavior of zirconium diboride-silicon carbide at 1800°C,” Scripta Materialia, vol. 57, no. 9, pp. 825–828, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. F. Monteverde, “Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2,” Applied Physics A: Materials Science and Processing, vol. 82, no. 2, pp. 329–337, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Lü, D. Jiang, J. Zhang, and Q. Lin, “Processing and properties of ZrB2-SiC composites obtained by aqueous tape casting and hot pressing,” Ceramics International, vol. 37, no. 1, pp. 293–301, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. X. G. Wang, J. X. Liu, Y. M. Kan, G. J. Zhang, and P.-L. Wang, “Slip casting and pressureless sintering of ZrB2-SiC ceramics,” Journal of Inorganic Materials, vol. 24, no. 4, pp. 831–835, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. F. F. Lange, “Powder processing science and technology for increased reliability,” Journal of the American Ceramic Society, vol. 72, no. 1, pp. 3–15, 1989. View at Publisher · View at Google Scholar · View at Scopus
  20. J. N. Israelachvili, Intermolecular and Surface Forces, Academic Press, New York, NY, USA, 2009.
  21. E. J. W. Verwey and J. T. G. Overbeek, Theory of the Stability of Lyophobic Colloids, Elsevier, Amsterdam, The Netherlands, 1948.
  22. R. J. Hunter, Zeta Potential in Colloid Science: Principles and Applications, Academic Press, London, UK, 1988.
  23. X. Zhu, F. Tang, T. S. Suzuki, and Y. Sakka, “Role of the initial degree of ionization of polyethylenimine in the dispersion of silicon carbide nanoparticles,” Journal of the American Ceramic Society, vol. 86, no. 1, pp. 189–191, 2003. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Wang and L. Gao, “Surface properties of polymer adsorbed zirconia nanoparticles,” Journal of Nanostructured Materials, vol. 11, no. 4, pp. 451–457, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. Z. Lü, D. Jiang, J. Zhang, and Q. Lin, “Aqueous tape casting of zirconium diboride,” Journal of the American Ceramic Society, vol. 92, no. 10, pp. 2212–2217, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. Z. Lü, D. Jiang, J. Zhang, and Q. Lin, “Microstructure and mechanical properties of zirconium diboride obtained by aqueous tape casting process and hot pressing,” Journal of the American Ceramic Society, vol. 93, no. 12, pp. 4153–4157, 2010. View at Publisher · View at Google Scholar · View at Scopus