Table of Contents
Journal of Coatings
Volume 2013 (2013), Article ID 712812, 6 pages
http://dx.doi.org/10.1155/2013/712812
Research Article

Properties of TiC Coating by Pulsed DC PACVD

1Surface Engineering Laboratory, Materials Engineering Department, Faculty of Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran, Iran
2Advanced Materials and Renewable Energies Department, Iranian Research Organization for Science and Technology, P.O. Box 15815-3538, Tehran, Iran

Received 25 March 2013; Revised 27 September 2013; Accepted 30 September 2013

Academic Editor: Juan J. De Damborenea

Copyright © 2013 Mahboobeh Azadi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Liepack, K. Bartsch, W. Brückner, and A. Leonhardt, “Mechanical behavior of PACVD TiC-amorphous carbon composite layers,” Surface and Coatings Technology, vol. 183, no. 1, pp. 69–73, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. N. Kumar, R. Krishnan, D. Dinesh Kumar, S. Dash, and A. K. Tyagi, “Tribological properties of nanostructured TiC coatings deposited on steel and silicon substrates using pulse laser deposition technique,” Tribology, vol. 5, no. 1, pp. 1–9, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Shanaghi, A. R. S. Rouhaghdam, S. Ahangarani, P. K. Chu, and T. S. Farahani, “Effects of duty cycle on microstructure and corrosion behavior of TiC coatings prepared by DC pulsed plasma CVD,” Applied Surface Science, vol. 258, no. 7, pp. 3051–3057, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. D.-J. Kim, Y.-R. Cho, M.-J. Lee, J.-M. Hong, Y.-K. Kim, and K.-H. Lee, “Properties of TiN-TiC multilayer coatings using plasma-assisted chemical vapor deposition,” Surface and Coatings Technology, vol. 116–119, pp. 906–910, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Shanaghi, A. Sabour Rouhaghdam, S. Ahangarani, and P. K. Chu, “Effect of plasma CVD operating temperature on nanomechanical properties of TiC nanostructured coating investigated by atomic force microscopy,” Research Bulletin, vol. 47, pp. 2200–2206, 2012. View at Publisher · View at Google Scholar
  6. H. L. Wang, J. L. He, and M. H. Hon, “Sliding wear resistance of TiCN coatings on tool steel made by plasma-enhanced chemical vapour deposition,” Wear, vol. 169, no. 2, pp. 195–200, 1993. View at Google Scholar · View at Scopus
  7. K. Kawata, H. Sugimura, and O. Takai, “Effects of chlorine on tribological properties of TiN films prepared by pulsed d.c. plasma-enhanced chemical vapor deposition,” Thin Solid Films, vol. 407, no. 1-2, pp. 38–44, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Arai, H. Fujita, and K. Oguri, “Plasma-assisted chemical vapour deposition of TiN and TiC on steel: properties of coatings,” Thin Solid Films, vol. 165, no. 1, pp. 139–148, 1988. View at Google Scholar · View at Scopus
  9. C. Jarms, H.-R. Stock, H. Berndt, K. Bartsch, A. Leonhardt, and B. Arnold, “Influence of the PACVD process parameters on the properties of titanium carbide thin films,” Surface and Coatings Technology, vol. 98, no. 1–3, pp. 1547–1552, 1998. View at Google Scholar · View at Scopus
  10. S. Ma, Y. Li, and K. Xu, “The composite of nitrided steel of H13 and TiN coatings by plasma duplex treatment and the effect of pre-nitriding,” Surface and Coatings Technology, vol. 137, no. 2-3, pp. 116–121, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. R. D. Torres, P. C. Soares Jr., C. Schmitz, and C. J. M. Siqueira, “Influence of the nitriding and TiAlN/TiN coating thickness on the sliding wear behavior of duplex treated AISI H13 steel,” Surface and Coatings Technology, vol. 205, no. 5, pp. 1381–1385, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. N. J. Archer, “The plasma assisted chemical vapor deposition of TiC, TiN and, TiCN,” Thin Solid Films, vol. 80, no. 1, pp. 221–225, 1981. View at Publisher · View at Google Scholar · View at Scopus
  13. A. F. G. Tan der Meer, “FELs, nice toys or efficient tools?” Nuclear Instruments and Method in Physics Research A, vol. 528, pp. 8–14, 2006. View at Google Scholar
  14. K. Oguri and T. Arai, “Friction coefficient of SiC, TiC and GeC coatings with excess carbon formed by plasma-assisted chemical vapour deposition,” Thin Solid Films, vol. 208, no. 2, pp. 158–160, 1992. View at Google Scholar · View at Scopus
  15. J. A. Avila and H. E. Jaramillo, “Synthesis and characterization of aluminum titanium carbonitride TiAlCN via mechanical alloying,” Journal of Scientific and Industrial Research, vol. 69, no. 10, pp. 773–776, 2010. View at Google Scholar · View at Scopus
  16. K. Holmberg, A. Matthews, and H. Ronkainen, “Coatings tribology—contact mechanisms and surface design,” Tribology International, vol. 31, no. 1–3, pp. 107–120, 1998. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Lee, K. Euh, J. C. Oh, and S. Lee, “Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam irradiation,” Materials Science and Engineering A, vol. 323, no. 1-2, pp. 251–259, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Pirso, M. Viljus, and S. Letunovits, “Sliding wear of TiC-NiMo cermets,” Tribology International, vol. 37, no. 10, pp. 817–824, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Tang, J. S. Zabinski, and J. E. Bultman, “TiC coatings prepared by pulsed laser deposition and magnetron sputtering,” Surface and Coatings Technology, vol. 91, no. 1-2, pp. 69–73, 1997. View at Google Scholar · View at Scopus
  20. D. G. Liu, J. P. Tu, C. D. Gu, R. Chen, and C. F. Hong, “Tribological and mechanical behaviors of TiN/CNx multilayer films deposited by magnetron sputtering,” Thin Solid Films, vol. 519, no. 15, pp. 4842–4848, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. A. S. Kumar, A. R. Durai, and T. Sornakumar, “Wear behaviour of alumina based ceramic cutting tools on machining steels,” Tribology International, vol. 39, no. 3, pp. 191–197, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Vleugels, “Fabrication, wear, and performance of ceramic cutting tools,” Advances in Science and Technology, vol. 45, pp. 1776–1785, 2006. View at Google Scholar
  23. T.-H. Fang, S.-R. Jian, and D.-S. Chuu, “Nanomechanical properties of TiC, TiN and TiCN thin films using scanning probe microscopy and nanoindentation,” Applied Surface Science, vol. 228, no. 1–4, pp. 365–372, 2004. View at Publisher · View at Google Scholar · View at Scopus