Table of Contents
Journal of Coatings
Volume 2014, Article ID 574028, 15 pages
Research Article

Development of Epoxy Based Surface Tolerant Coating Improvised with Zn Dust and MIO on Steel Surfaces

1TATA Steel Ltd., Jamshedpur, India
2IIT Bombay, India
3Stanvac-Superon Group, Gurgaon, India

Received 16 November 2013; Revised 28 January 2014; Accepted 18 February 2014; Published 3 April 2014

Academic Editor: Fahmina Zafar

Copyright © 2014 Rachna Jain et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. C. Soltz, “The effects of substrate contaminates on the life of epoxy coatings in sea water,” NSRP Report 0329, National Shipbuilding Research Program, 1991. View at Google Scholar
  2. S. B. R. Appleman, S. Boocock, R. E. F. Weaver, and G. C. Soltz, “Effect of surface contaminates on coating life,” U.S. Department of Transportation Federal Highway Administration Publication FHWA-RD-91-011, 1991. View at Google Scholar
  3. National Steel and Shipbuilding NSRP Report, “Power Tool Cleaning an alternate for abrasive blasting,” 1993.
  4. J. W. Peart, Evaluation of Coatings Applied on Less than Ideal Surfaces, withPeterson builders, inc, sturgeon bay, Wis, USA, 1995.
  5. “Curing Agent for Epoxy Resins,” Three Bond Technical News, 1990.
  6. N. Rajgopalan and A. S. Khanna, “Effect of nano-ZnO in lowering yellowing of aliphatic amine cured DGEBA-based epoxy coatings on UV exposure,” International Journal of Scientific and Research, vol. 3, no. 4, 2013. View at Google Scholar
  7. H. Lee and K. Neville, Epoxy Resins Their Synthesis and Characterization and Curing of Epoxy Resins, Their Applications and Technology, McGraw Hill.
  8. Z. W. Wicks, F. N. Jones, and S. P. Pappas, “Organic coatings: science and technology,” Dyes and Pigments, vol. 45, pp. 85–86, 2000. View at Google Scholar
  9. L. S. Salem, “Epoxies for steel,” Journal of Protective Coatings and Linings, vol. 13, pp. 77–98, 1996. View at Google Scholar
  10. M. Ebert et al., Polymer, vol. 32, no. 3, p. 139, 1991.
  11. S. Swier, G. van Assche, W. Vuchelen, and B. Van Mele, “Role of complex formation in the polymerization kinetics of modified epoxy-amine systems,” Macromolecules, vol. 38, no. 6, pp. 2281–2288, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Shreepathi, P. Bajaj, and B. P. Mallik, “Electrochemical impedance spectroscopy investigations of epoxy zinc rich coatings: role of Zn content on corrosion protection mechanism,” Electrochimica Acta, vol. 55, no. 18, pp. 5129–5134, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. P. A. Sørensen, S. Kiil, K. Dam-Johansen, and C. E. Weinell, “Anticorrosive coatings: a review,” Journal of Coatings Technology Research, vol. 6, no. 2, pp. 135–176, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Ruvolo-Filho and M. Magaton, “Evaluating barrier properties of acrylic polyurethane and aliphatic polyurethane coatings loaded with micaceous iron oxide or red iron oxide,” Polymer. Plastics Technology and Engineering, vol. 48, no. 7, pp. 682–695, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Giúdice, J. C. Benftez, and M. M. Linares, “Zinc-rich epoxy primers based on lamellar zinc dust,” Surface Coatings International, vol. 80, no. 6, pp. 279–284, 1997. View at Google Scholar · View at Scopus