Table of Contents
Journal of Composites
Volume 2013, Article ID 792620, 8 pages
http://dx.doi.org/10.1155/2013/792620
Research Article

Effect of Natural Fillers on Mechanical Properties of GFRP Composites

1Research Scholar, Mechanical & Production Engineering Department, GNDEC, Punjab Technical University, Ludhiana 141 010, Punjab, India
2Mechanical & Production Engineering Department, GNDEC, Punjab Technical University, Ludhiana 141 010, Punjab, India
3Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247 667, India

Received 26 January 2013; Revised 2 June 2013; Accepted 14 June 2013

Academic Editor: Masamichi Kawai

Copyright © 2013 Vikas Dhawan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [14 citations]

The following is the list of published articles that have cited the current article.

  • Tara Sen, and H.N. Jagannatha Reddy, “Flexural strengthening of RC beams using natural sisal and artificial carbon and glass fabric reinforced composite system,” Sustainable Cities and Society, 2013. View at Publisher · View at Google Scholar
  • Gujjala Raghavendra, Shakuntala Ojha, S. K. Acharya, and S. K. Pal, “Influence of micro/nanofiller alumina on the mechanical behavior of novel hybrid epoxy nanocomposites,” High Performance Polymers, vol. 27, no. 3, pp. 342–351, 2015. View at Publisher · View at Google Scholar
  • Ahmad Adlie Shamsuri, Mohammad Naqiuddin Mohd Zolkepli, Azmah Hanim Mohamed Ariff, Ahmad Khuzairi Sudari, and Mazni Abu Zarin, “A Preliminary Investigation on Processing, Mechanical and Thermal Properties of Polyethylene/Kenaf Biocomposites with Dolomite Added as Secondary Filler,” Journal of Composites, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Munusamy Kesava, and Kannaiyan Dinakaran, “Natural-Fiber-Reinforced Epoxy and USP Resin Composites,” Spherical and Fibrous Filler Composites, pp. 127–156, 2016. View at Publisher · View at Google Scholar
  • R. H. Patel, P. M. Kapatel, A. D. Machchhar, Y. A. Kapatel, R. H. Patel, P. M. Kapatel, A. D. Machchhar, and Y. A. Kapatel, “Studies on Natural Fiber reinforced Polymer Matrix Composites,” International Conference On Condensed Matter And Applied Physics (Icc 2015), vol. 1728, 2016. View at Publisher · View at Google Scholar
  • Jai Inder Preet Singh, Sehijpal Singh, and Vikas Dhawan, “Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites,” Journal of Natural Fibers, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Jaideep Adhikari, Bhabatosh Biswas, Sumit Chabri, Nil Ratan Bandyopadhyay, Sudipta Halder, Bhairab Chandra Mitra, and Arijit Sinha, “Mechanical properties of metal oxide dispersed jute fiber reinforced polyester biocomposites,” Polymer Composites, 2017. View at Publisher · View at Google Scholar
  • Taofik Oladimeji Azeez, Dominic Okechukwu Onukwuli, Joseph Tagbo Nwabanne, and Alma Tamunonengiofori Banigo, “ Cissus Populnea Fiber - Unsaturated Polyester Composites: Mechanical Properties and Interfacial Adhesion ,” Journal of Natural Fibers, pp. 1–14, 2018. View at Publisher · View at Google Scholar
  • Guravtar Singh Mann, Lakhwinder Pal Singh, Pramod Kumar, and Sunpreet Singh, “Green composites: A review of processing technologies and recent applications,” Journal of Thermoplastic Composite Materials, pp. 089270571881635, 2018. View at Publisher · View at Google Scholar
  • Augustine Dinobi Omah, Esther Chinelo Omah, Peter Ogbuna Offor, Chigbo Aghaegbusi Mgbemene, and Mkpamdi Nelson Eke, “Feasibility study on the use of carbonized cassava cortex as reinforcement in polymer-matrix composites,” Cogent Engineering, vol. 5, no. 1, pp. 1–20, 2018. View at Publisher · View at Google Scholar
  • A. Buketov, M. Brailo, S. Yakushchenko, and A. Sapronova, “Development of Epoxy-Polyester Composite with Improved Thermophysical Properties for Restoration of Details of Sea and River Transport,” Advances in Materials Science and Engineering, vol. 2018, pp. 1–6, 2018. View at Publisher · View at Google Scholar
  • Seyyed Alireza Hashemi, Seyyed Mojtaba Mousavi, Ali Mohammad shakibafard, Ghasem Shouli, Yousef Amrollahi, and Aziz Babapoor, “Development of Efficient Composites via Renewable, Recyclable, and Degradable Additives,” Composites from Renewable and Sustainable Materials [Working Title], 2019. View at Publisher · View at Google Scholar
  • Kishore Debnath, Vikas Dhawan, Inderdeep Singh, and Tirumalai S Srivatsan, “Wear and frictional behaviour of composites filled with agro-based waste materials,” Emerging Materials Research, vol. 8, no. 1, pp. 84–93, 2019. View at Publisher · View at Google Scholar
  • Ain U Md Shah, Mohamed TH Sultan, and Mohammad Jawaid, “Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites – Mechanical performance in static and dynamic evaluations,” Journal of Sandwich Structures & Materials, pp. 109963621882274, 2019. View at Publisher · View at Google Scholar