Table of Contents
Journal of Composites
Volume 2014 (2014), Article ID 145973, 10 pages
http://dx.doi.org/10.1155/2014/145973
Research Article

Sintering and Hardness Behavior of Fe-Al2O3 Metal Matrix Nanocomposites Prepared by Powder Metallurgy

1Department of Ceramic Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, Uttar Pradesh 221005, India
2Department of Mechanical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, Uttar Pradesh 221005, India

Received 11 June 2014; Revised 11 August 2014; Accepted 20 August 2014; Published 10 September 2014

Academic Editor: Suying Wei

Copyright © 2014 Pallav Gupta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Pallav Gupta, Devendra Kumar, Om Parkash, and A. K. Jha, “Sintering and Hardness Behavior of Fe-Al2O3 Metal Matrix Nanocomposites Prepared by Powder Metallurgy,” Journal of Composites, vol. 2014, Article ID 145973, 10 pages, 2014. doi:10.1155/2014/145973