Table of Contents
Journal of Composites
Volume 2014, Article ID 846962, 8 pages
http://dx.doi.org/10.1155/2014/846962
Research Article

Effect of Melt Temperature and Hold Pressure on the Weld-Line Strength of an Injection Molded Talc-Filled Polypropylene

Center for Lightweighting Automotive Materials and Processing, University of Michigan-Dearborn, Dearborn, MI 48128, USA

Received 12 June 2013; Revised 21 December 2013; Accepted 21 January 2014; Published 5 March 2014

Academic Editor: Mircea Chipara

Copyright © 2014 Yuanxin Zhou and P. K. Mallick. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Yuanxin Zhou and P. K. Mallick, “Effect of Melt Temperature and Hold Pressure on the Weld-Line Strength of an Injection Molded Talc-Filled Polypropylene,” Journal of Composites, vol. 2014, Article ID 846962, 8 pages, 2014. https://doi.org/10.1155/2014/846962.