Table of Contents
Journal of Composites
Volume 2014, Article ID 903497, 7 pages
http://dx.doi.org/10.1155/2014/903497
Research Article

Baseline Moisture Resistance of PWP Cement Composite Boards Reinforced with Internal Glass Fiber Reinforcement under Accelerated Wet-Dry Aging

1Department of Civil Engineering, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla 90112, Thailand
2Department of Civil Engineering, Princess of Naradhiwas University, Amphur Muang, Narathiwat 96000, Thailand

Received 6 June 2014; Revised 22 July 2014; Accepted 22 July 2014; Published 5 August 2014

Academic Editor: Hui Shen Shen

Copyright © 2014 Woraphot Prachasaree et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Demirbaş and A. Aslan, “Effects of ground hazelnut shell, wood, and tea waste on the mechanical properties of cement,” Cement and Concrete Research, vol. 28, no. 8, pp. 1101–1104, 1998. View at Publisher · View at Google Scholar · View at Scopus
  2. R. W. Wolfe and A. Gjinolli, “Durability and strength of cement-bonded wood particle composites made from construction waste,” Forest Products Journal, vol. 49, no. 2, pp. 24–31, 1999. View at Google Scholar · View at Scopus
  3. H. Yang, D. Kim, and H. Kim, “Rice straw-wood particle composite for sound absorbing wooden construction materials,” Bioresource Technology, vol. 86, no. 2, pp. 117–121, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Gong, D. P. Kamdem, and R. Harichandran, “Compression tests on wood-cement particle composites made of CCA-treated wood removed from service,” in Proceedings of Environmental Impacts of Preservative-Treated Wood Conference, Orlando, Fla, USA, 2004.
  5. B. J. Mohr, H. Nanko, and K. E. Kurtis, “Durability of kraft pulp fiber-cement composites to wet/dry cycling,” Cement and Concrete Composites, vol. 27, no. 4, pp. 435–448, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. B. J. Mohr, H. Nanko, and K. E. Kurtis, “Durability of thermomechanical pulp fiber-cement composites to wet/dry cycling,” Cement and Concrete Research, vol. 35, no. 8, pp. 1646–1649, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Z. Hossain, M. Rokonuzzaman, and S. Inoue, “Flexural behavior of cement composites panels reinforced with different types of meshes,” in Proceedings of the 30th Conference on Our World in Concrete & Structures, Singapore, 2005.
  8. B. J. Mohr, H. Nanko, and K. E. Kurtis, “Aligned kraft pulp fiber sheets for reinforcing mortar,” Cement and Concrete Composites, vol. 28, no. 2, pp. 161–172, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Coatanlem, R. Jauberthie, and F. Rendell, “Lightweight wood chipping concrete durability,” Construction and Building Materials, vol. 20, no. 9, pp. 776–781, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Turgut, “Cement composites with limestone dust and different grades of wood sawdust,” Building and Environment, vol. 42, no. 11, pp. 3801–3807, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Gencoglu and B. Mobasher, “Static and impact behavior of fabric reinforced cement composites,” in Proceedings of the 5th International RILEM Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC5), pp. 463–470, Cachan, France, 2007.
  12. A. P. Joaquim, G. H. D. Tonoli, S. F. D. Santos, and H. Savastano Jr., “Sisal organosolv pulp as reinforcement for cement based composites,” Materials Research, vol. 12, no. 3, pp. 305–314, 2009. View at Google Scholar · View at Scopus
  13. B. Mohebby, F. Tavassoli, and S. Kazemi-Najafi, “Mechanical properties of medium density fiberboard reinforced with metal and woven synthetic nets,” European Journal of Wood and Wood Products, vol. 69, no. 2, pp. 199–206, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Woraphot, H. Abideng, and K. Thaniya, “Feasibility study of cement composites with Para wood particle wastes: strength and durability,” Global Nest Journal, vol. 13, no. 2, pp. 183–192, 2011. View at Google Scholar · View at Scopus
  15. European Standard, “Cement. Composition, specifications and conformity criteria for common cements,” EN 197-1: 2000.
  16. W. Prachasaree, S. Limkatanyu, and A. Hawa, “Parawood particle cement composite boards under accelerated wet/dry cycling and natural aging,” Journal of Sustainable Cement-Based Materials, vol. 2, no. 3-4, pp. 227–234, 2013. View at Google Scholar
  17. European Standard, “Fibre-cement profiled sheets and fittings—product specification and test methods,” BS EN 494, 1994. View at Google Scholar
  18. Eurocode5, Eurocode 5 Design of timber structures, EN1995-1-1:2004E.