Table of Contents
Journal of Composites
Volume 2014, Article ID 987956, 7 pages
http://dx.doi.org/10.1155/2014/987956
Research Article

Hybrid Fibre Polylactide Acid Composite with Empty Fruit Bunch: Chopped Glass Strands

1Department of Mechanical, Materials and Manufacturing Engineering, The University of Nottingham Malaysia Campus, Jalan Broga, 43500 Semenyih, Selangor, Malaysia
2Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Jalan Universiti, Bandar Baru Barat, 31900 Kampar, Perak, Malaysia

Received 26 June 2014; Revised 27 September 2014; Accepted 29 September 2014; Published 14 October 2014

Academic Editor: Hui Shen Shen

Copyright © 2014 K. Y. Tshai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [6 citations]

The following is the list of published articles that have cited the current article.

  • T. S. Fatinah, K. S. Basaruddin, A. S. Abd Rahman, and M. S. Abdul Majid, “Effect of mean stress and amplitude stress on mechanical stress-strain response of chopped strand mat (CSM) composite under cyclic load,” vol. 1885, pp. 020094, . View at Publisher · View at Google Scholar
  • W. H. Haniffah, S. M. Sapuan, K. Abdan, M. Khalid, M. Hasan, and M. Enamul Hoque, “Kenaf Fibre Reinforced Polypropylene Composites: Effect of Cyclic Immersion on Tensile Properties,” International Journal of Polymer Science, vol. 2015, pp. 1–6, 2015. View at Publisher · View at Google Scholar
  • Srinivas Shenoy Heckadka, Suhas Yeshwant Nayak, Karan Narang, and Kirti Vardhan Pant, “Chopped Strand/Plain Weave E-Glass as Reinforcement in Vacuum Bagged Epoxy Composites,” Journal of Materials, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Vijaykumar Guna, Manikandan Ilangovan, M.G. Ananthaprasad, and Narendra Reddy, “Hybrid biocomposites,” Polymer Composites, 2017. View at Publisher · View at Google Scholar
  • S. Deniz Varsavas, and Cevdet Kaynak, “Weathering degradation performance of PLA and its glass fiber reinforced composite,” Materials Today Communications, 2017. View at Publisher · View at Google Scholar
  • T S Fatinah, M S Abdul Majid, M J M Ridzuan, T W Hong, N A M Amin, and M Afendi, “Tensile properties of compressed moulded Napier/glass fibre reinforced epoxy composites,” Journal of Physics: Conference Series, vol. 908, pp. 012013, 2017. View at Publisher · View at Google Scholar