Table of Contents
Journal of Composites
Volume 2015, Article ID 760909, 7 pages
http://dx.doi.org/10.1155/2015/760909
Research Article

A Preliminary Investigation on Processing, Mechanical and Thermal Properties of Polyethylene/Kenaf Biocomposites with Dolomite Added as Secondary Filler

1Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
2Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
3Laboratory of Vaccines and Immunotherapeutics, Institute of Bioscience, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia

Received 15 June 2015; Accepted 20 September 2015

Academic Editor: Raul Fangueiro

Copyright © 2015 Ahmad Adlie Shamsuri et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ahmad Adlie Shamsuri, Mohammad Naqiuddin Mohd Zolkepli, Azmah Hanim Mohamed Ariff, Ahmad Khuzairi Sudari, and Mazni Abu Zarin, “A Preliminary Investigation on Processing, Mechanical and Thermal Properties of Polyethylene/Kenaf Biocomposites with Dolomite Added as Secondary Filler,” Journal of Composites, vol. 2015, Article ID 760909, 7 pages, 2015. https://doi.org/10.1155/2015/760909.