Table of Contents
Journal of Industrial Engineering
Volume 2013 (2013), Article ID 453509, 14 pages
http://dx.doi.org/10.1155/2013/453509
Research Article

The Pressure Relief System Design for Industrial Reactors

University of California, 1111 Franklin St., Oakland, CA 94607, USA

Received 29 November 2012; Revised 4 June 2013; Accepted 11 September 2013

Academic Editor: Eleonora Bottani

Copyright © 2013 Iztok Hace. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. K. Fauske, “Emergency relief system design for reactive and non-reactive systems: extension of the DIERS methodology,” Plant/Operations Progress, vol. 7, no. 3, pp. 153–158, 1988. View at Google Scholar · View at Scopus
  2. J. C. Leung, “Simplified vent sizing equations for emergency relief requirements in reactors and storage vessels,” AIChE Journal, vol. 32, no. 10, pp. 1622–1634, 1986. View at Google Scholar · View at Scopus
  3. J. C. Leung, H. K. Fauske, and H. G. Fisher, “Thermal runaway reactions in a low thermal inertia apparatus,” Thermochimica Acta, vol. 104, pp. 13–29, 1986. View at Google Scholar · View at Scopus
  4. R. C. Rosaler, Standard Handbook of Plant Engineering, McGraw-Hill, New York, NY, USA, 3rd edition, 2002.
  5. API RP 520, Sizing, Selection and Installation of Pressure Relieving Devices in Refineries, American Petroleum Institution, 2000.
  6. API STD 526, Flanged Steel Pressure Relief Valves, American Petroleum Institution, 6th edition, 2012.
  7. R. H. Perry and D. W. Green, Perry's Chemical Engineers' Handbook, McGraw-Hill, New York, NY, USA, 2007.
  8. J. L. Gustin, J. Fillion, G. Tréand, and K. E. Biyaali, “The phenol + formaldehyde runaway reaction. Vent sizing for reactor protection,” Journal of Loss Prevention in the Process Industries, vol. 6, no. 2, pp. 103–113, 1993. View at Google Scholar · View at Scopus
  9. H. K. Fauske, “Generalized vent sizing monogram for runaway chemical reactions,” Plant/Operations Progress, vol. 3, no. 4, pp. 213–215, 1984. View at Google Scholar · View at Scopus
  10. J. F. Richardson, J. H. Harker, and J. R. Backhurst, Coulson and Richardson's Chemical Engineering, Butterworth-Heinemann, Boston, Mass, USA, 2009.
  11. J. D. Seader, E. J. Henley, and D. K. Roter, Separation Process Principles, John Wiley & Sons, New York, NY, USA, 2010.
  12. F. Bleier, Fan Handbook: Selection, Application and Design, McGraw-Hill, New York, NY, USA, 1987.
  13. S. A. Kudchadker, A. P. Kudchadker, R. C. Wilhoit, and B. J. Zwolinski, “Ideal gas thermodynamic properties of phenol and cresols,” Journal of Physical and Chemical Reference Data, vol. 7, no. 2, pp. 417–423, 1978. View at Publisher · View at Google Scholar · View at Scopus
  14. I. Hace, “Comparison of concentration profiles for boundary layers in absorption with chemical reaction processes,” Chemical Engineering and Technology, vol. 29, no. 5, pp. 574–582, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. J. C. Leung and H. K. Fauske, “Runaway system characterization and vent sizing based on DIERS methodology,” Plant/Operations Progress, vol. 6, no. 2, pp. 77–83, 1987. View at Publisher · View at Google Scholar · View at Scopus
  16. Crane Technical Paper, “A Process Design Engineer’s Perspective on Using Equivalent Lengths of Valves and Fittings in Pipeline Pressure Drop Calculations, 410(TP-410),” 2009.
  17. L. W. Mays, Hydraulic Design Handbook, McGraw-Hill, New York, NY, USA, 1999.
  18. “‘ATEX Directive 94/9EC’ on equipment and protective systems intended for use in potentially explosive atmospheres (ATEX),” http://ec.europa.eu/enterprise/sectors/mechanical/documents/legislation/atex/.