Table of Contents
Journal of Industrial Engineering
Volume 2014, Article ID 837390, 8 pages
http://dx.doi.org/10.1155/2014/837390
Review Article

Applicability of Tool Condition Monitoring Methods Used for Conventional Milling in Micromilling: A Comparative Review

Microsystems Technology Laboratory, Central Mechanical Engineering Research Institute (CSIR), Durgapur, West Bengal 713209, India

Received 24 February 2014; Accepted 11 April 2014; Published 28 April 2014

Academic Editor: Jun Zhao

Copyright © 2014 Soumen Mandal. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Soumen Mandal, “Applicability of Tool Condition Monitoring Methods Used for Conventional Milling in Micromilling: A Comparative Review,” Journal of Industrial Engineering, vol. 2014, Article ID 837390, 8 pages, 2014. https://doi.org/10.1155/2014/837390.