Table of Contents
Journal of Industrial Engineering
Volume 2014, Article ID 837390, 8 pages
http://dx.doi.org/10.1155/2014/837390
Review Article

Applicability of Tool Condition Monitoring Methods Used for Conventional Milling in Micromilling: A Comparative Review

Microsystems Technology Laboratory, Central Mechanical Engineering Research Institute (CSIR), Durgapur, West Bengal 713209, India

Received 24 February 2014; Accepted 11 April 2014; Published 28 April 2014

Academic Editor: Jun Zhao

Copyright © 2014 Soumen Mandal. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Chae, S. S. Park, and T. Freiheit, “Investigation of micro-cutting operations,” International Journal of Machine Tools and Manufacture, vol. 46, no. 3-4, pp. 313–332, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. K. V. R. Subrahmanyam, W. Y. San, H. G. Soon, and H. Sheng, “Cutting force prediction for ball nose milling of inclined surface,” International Journal of Advanced Manufacturing Technology, vol. 48, no. 1–4, pp. 23–32, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. G. Bissacco, H. N. Hansen, and L. De Chiffre, “Micromilling of hardened tool steel for mould making applications,” Journal of Materials Processing Technology, vol. 167, no. 2-3, pp. 201–207, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Su, N. He, L. Li, and X. L. Li, “An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V,” Wear, vol. 261, no. 7-8, pp. 760–766, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Filiz, C. M. Conley, M. B. Wasserman, and O. B. Ozdoganlar, “An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills,” International Journal of Machine Tools and Manufacture, vol. 47, no. 7-8, pp. 1088–1100, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Rahman, Z.-G. Wang, and Y.-S. Wong, “A review on high-speed machining of titanium alloys,” JSME International Journal C: Mechanical Systems, Machine Elements and Manufacturing, vol. 49, no. 1, pp. 11–20, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Dornfeld, S. Min, and Y. Takeuchi, “Recent advances in mechanical micromachining,” CIRP Annals: Manufacturing Technology, vol. 55, no. 2, pp. 745–768, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. Y.-B. Bang, K.-M. Lee, and S. Oh, “5-axis micro milling machine for machining micro parts,” International Journal of Advanced Manufacturing Technology, vol. 25, no. 9-10, pp. 888–894, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Aramcharoen, P. T. Mativenga, and S. Yang, “The effect of AlCrTiN coatings on product quality in micro-milling of 45 HRC hardened H13 die steel,” in Proceedings of the 35th International MATADOR Conference, pp. 203–206, Springer, Taipei, Taiwan, 2007.
  10. D. A. Dornfeld and D. E. Lee, Precision Manufacturing, Springer, London, UK, 2007.
  11. A. Aramcharoen and P. T. Mativenga, “Size effect and tool geometry in micromilling of tool steel,” Precision Engineering, vol. 33, no. 4, pp. 402–407, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Rahman, A. Senthil Kumar, and J. R. S. Prakash, “Micro milling of pure copper,” Journal of Materials Processing Technology, vol. 116, no. 1, pp. 39–43, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. I. Tansel, O. Rodriguez, M. Trujillo, E. Paz, and W. Li, “Micro-end-milling—I. Wear and breakage,” International Journal of Machine Tools and Manufacture, vol. 38, no. 12, pp. 1419–1436, 1998. View at Google Scholar · View at Scopus
  14. W. Y. Bao and I. N. Tansel, “Modeling micro-end-milling operations. Part III: influence of tool wear,” International Journal of Machine Tools and Manufacture, vol. 40, no. 15, pp. 2193–2211, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. X. Lai, H. Li, C. Li, Z. Lin, and J. Ni, “Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness,” International Journal of Machine Tools and Manufacture, vol. 48, no. 1, pp. 1–14, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Zhou, Q. Bai, K. Yang, and Z. Luo, “Relationship between cutting temperature and cutting parameters of micro-milling,” World Academy of Science, Engineering and Technology, vol. 46, pp. 568–571, 2010. View at Google Scholar
  17. I. N. Tansel, T. T. Arkan, W. Y. Bao et al., “Tool wear estimation in micro-machining. Part I: tool usage-cutting force relationship,” International Journal of Machine Tools and Manufacture, vol. 40, no. 4, pp. 599–608, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. B.-C. Shin, S.-J. Ha, M.-W. Cho, T.-I. Seo, G.-S. Yoon, and Y.-M. Heo, “Indirect cutting force measurement in the micro end-milling process based on frequency analysis of sensor signals,” Journal of Mechanical Science and Technology, vol. 24, no. 1, pp. 165–168, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Ding, N. Shen, and Y. C. Shin, “Experimental evaluation and modeling analysis of micromilling of hardened H13 tool steels,” Journal of Manufacturing Science and Engineering, vol. 133, no. 4, Article ID 041007, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Mekid, T. Laoui, and F. Patel, “Exploring a manufacturing route to produce WC-based micro-cutting tool with nanostructured material,” Nano and Micro Materials, Devices and Systems, vol. 11, pp. 171–176, 2011. View at Google Scholar
  21. S. S. Park and R. Rahnama, “Robust chatter stability in micro-milling operations,” CIRP Annals: Manufacturing Technology, vol. 59, no. 1, pp. 391–394, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Inasaki, “Application of acoustic emission sensor for monitoring machining processes,” Ultrasonics, vol. 36, no. 1–5, pp. 273–281, 1998. View at Google Scholar · View at Scopus
  23. AE Sensors and Preamplifiers User Manual, Physical acoustics corporation, Princeton, NJ, USA, 2002.
  24. K. Jemielniak, “Commercial tool condition monitoring systems,” International Journal of Advanced Manufacturing Technology, vol. 15, no. 10, pp. 711–721, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. MTC Tool and Process Monitoring, Brochure of Artis Company, Ann Arbor, Mich, USA, 1997.
  26. Acoustic Emission Sensor, Brochure of Montronix Company, Ann Arbor, Mich, USA, 1994.
  27. Wide Band Acoustic Emission Sensor WAE 100, brochure of Prometec company, Aachen, Germany.
  28. Nordmann Sensor Technology, Brochure of Nordmann Company, Koln, Germany, 1997.
  29. Wireless AE Sensor AEL 200, Brochure of Prometec Company, Aachen, Germany.
  30. Fluid Sound Sensor WAE 100, Brochure of Prometec Company, Aachen, Germany.
  31. I. S. Kang, J. S. Kim, M. C. Kang, and K. Y. Lee, “Tool condition and machined surface monitoring for micro-lens array fabrication in mechanical machining,” Journal of Materials Processing Technology, vol. 201, no. 1–3, pp. 585–589, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. I. Tansel, M. Trujillo, A. Nedbouyan et al., “Micro-end-milling—III. Wear estimation and tool breakage detection using acoustic emission signals,” International Journal of Machine Tools and Manufacture, vol. 38, no. 12, pp. 1449–1466, 1998. View at Google Scholar · View at Scopus
  33. J. Sun, G. S. Hong, M. Rahman, and Y. S. Wong, “Identification of feature set for effective tool condition monitoring by acoustic emission sensing,” International Journal of Production Research, vol. 42, no. 5, pp. 901–918, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. D. V. Hutton and F. Hu, “Acoustic emission monitoring of tool wear in end-milling using time-domain averaging,” Journal of Manufacturing Science and Engineering, vol. 121, no. 1, pp. 8–12, 1999. View at Google Scholar · View at Scopus
  35. C. L. Yen, M. C. Lu, and J. L. Chen, “Applying the self-organizing feature map (SOM) algorithm to AE-based tool wear monitoring in micro-cutting,” Journal of Mechanical Systems and Signal Processing, vol. 34, pp. 353–366, 2013. View at Google Scholar
  36. L. Li, J. Bao, N. He, and Q. Yu, “Application of acoustic emission sensor in detecting tool breakage in micro-milling,” Transactions of Nanjing University of Aeronautics and Astronautics, vol. 27, no. 2, pp. 119–124, 2010. View at Google Scholar · View at Scopus
  37. S. C. Lin and R. J. Lin, “Tool wear monitoring in face milling using force signals,” Wear, vol. 198, no. 1-2, pp. 136–142, 1996. View at Google Scholar · View at Scopus
  38. F. Cuš and U. Župerl, “Real-time cutting tool condition monitoring in milling,” Journal of Mechanical Engineering, vol. 57, no. 2, pp. 142–150, 2011. View at Publisher · View at Google Scholar · View at Scopus
  39. H. Saglam and A. Unuvar, “Tool condition monitoring in milling based on cutting forces by a neural network,” International Journal of Production Research, vol. 41, no. 7, pp. 1519–1532, 2003. View at Publisher · View at Google Scholar · View at Scopus
  40. K. P. Zhu, Y. S. Wong, and G. S. Hong, “Noise-robust tool condition monitoring in micro-milling with hidden Markov models,” Studies in Fuzziness and Soft Computing, vol. 226, pp. 23–46, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. K. Zhu, Y. S. Wong, and G. S. Hong, “Multi-category micro-milling tool wear monitoring with continuous hidden Markov models,” Mechanical Systems and Signal Processing, vol. 23, no. 2, pp. 547–560, 2009. View at Publisher · View at Google Scholar · View at Scopus
  42. S. Mandal, A. Kumar, and N. Nagahanumaiah, “Assessment of machine stiffness response and material characteristics by fuzzy rule based pattern matching of cutting force plots,” Journal of Manufacturing Systems, vol. 32, pp. 228–237, 2013. View at Google Scholar
  43. T. Pfeifer and L. Wiegers, “Reliable tool wear monitoring by optimized image and illumination control in machine vision,” Measurement, vol. 28, no. 3, pp. 209–218, 2000. View at Publisher · View at Google Scholar · View at Scopus
  44. A. A. Kassim, M. A. Mannan, and Z. Mian, “Texture analysis methods for tool condition monitoring,” Image and Vision Computing, vol. 25, no. 7, pp. 1080–1090, 2007. View at Publisher · View at Google Scholar · View at Scopus
  45. S. Kurada and C. Bradley, “A review of machine vision sensors for tool condition monitoring,” Computers in Industry, vol. 34, no. 1, pp. 55–72, 1997. View at Google Scholar · View at Scopus
  46. A. Otieno, C. Pedapati, X. Wan, and H. Zhang, “Imaging and wear analysis of micro-tools using machine vision,” in Proceedings of the IJME Conference, 2006.
  47. D. A. Fadare and A. O. Oni, “Development and application of a machine vision system for measurement of tool wear,” Journal of Engineering and Applied Sciences, vol. 4, no. 4, pp. 42–49, 2009. View at Google Scholar · View at Scopus
  48. FASTCAM SA3 High Speed Camera, Manual of the Photron Company, San Diego, Calif, USA.
  49. J. C. Chen and W.-L. Chen, “Tool breakage detection system using an accelerometer sensor,” Journal of Intelligent Manufacturing, vol. 10, no. 2, pp. 187–197, 1999. View at Publisher · View at Google Scholar · View at Scopus
  50. C. A. Suprock, B. K. Fussell, R. Z. Hassan, and R. B. Jerard, “A low cost wireless tool tip vibration sensor for milling,” in Proceedings of the International Manufacturing Science and Engineering Conference (MSEC '08), pp. 465–474, Evanston, Ill, USA, October 2008. View at Scopus
  51. I. Yesilyurt and H. Ozturk, “Tool condition monitoring in milling using vibration analysis,” International Journal of Production Research, vol. 45, no. 4, pp. 1013–1028, 2007. View at Publisher · View at Google Scholar · View at Scopus
  52. J. Z. Zhang and J. C. Chen, “Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system,” International Journal of Advanced Manufacturing Technology, vol. 39, no. 1-2, pp. 118–128, 2008. View at Publisher · View at Google Scholar · View at Scopus
  53. A. G. Rehorn, J. Jiang, and P. E. Orban, “State-of-the-art methods and results in tool condition monitoring: a review,” International Journal of Advanced Manufacturing Technology, vol. 26, no. 7-8, pp. 693–710, 2005. View at Publisher · View at Google Scholar · View at Scopus
  54. M. Kumar, K. Dotson, and S. N. Melkote, “An experimental technique to detect tool-workpiece contact in micromilling,” Journal of Manufacturing Processes, vol. 12, no. 2, pp. 99–105, 2010. View at Publisher · View at Google Scholar · View at Scopus
  55. P. Y. Sevilla-Camacho, G. Herrera-Ruiz, J. B. Robles-Ocampo, and J. C. Jáuregui-Correa, “Tool breakage detection in CNC high-speed milling based in feed-motor current signals,” International Journal of Advanced Manufacturing Technology, vol. 53, no. 9–12, pp. 1141–1148, 2011. View at Publisher · View at Google Scholar · View at Scopus
  56. X. Li, “Detection of tool flute breakage in end milling using feed-motor current signatures,” IEEE/ASME Transactions on Mechatronics, vol. 6, no. 4, pp. 491–498, 2001. View at Publisher · View at Google Scholar · View at Scopus
  57. G. D. Kim and C. N. Chu, “In-process tool fracture monitoring in face milling using spindle motor current and tool fracture index,” International Journal of Advanced Manufacturing Technology, vol. 18, no. 6, pp. 383–389, 2001. View at Publisher · View at Google Scholar · View at Scopus
  58. B. Y. Lee and Y. S. Tarng, “Application of the discrete wavelet transform to the monitoring of tool failure in end milling using the spindle motor current,” International Journal of Advanced Manufacturing Technology, vol. 15, no. 4, pp. 238–243, 1999. View at Publisher · View at Google Scholar · View at Scopus
  59. T. I. Ogedengbe, R. Heinemann, and S. Hinduja, “Feasibility of tool condition monitoring on micro-milling using current signals,” Assumption University Journal of Technology, vol. 14, pp. 161–172, 2011. View at Google Scholar
  60. L. Ma, S. N. Melkote, J. B. Morehouse et al., “Thin-film PVDF sensor-based monitoring of cutting forces in peripheral end milling,” Journal of Dynamic Systems, Measurement and Control, vol. 134, pp. 1–9, 2012. View at Google Scholar
  61. S. Mandal, A. Kumar, and N. Nagahanumaiah, “Dynamic shear stress evaluation on micro-turning tool using photoelasticity,” Advanced Materials Research, vol. 569, pp. 376–379, 2012. View at Google Scholar
  62. H. Saglam and A. Unuvar, “Three-component strain gage based milling dynamometer design and manufacturing,” Journal of Integrated Design and Process Science, vol. 5, pp. 95–109, 2001. View at Google Scholar
  63. H. Alemohammad, E. Toyserkani, and C. P. Paul, “Fabrication of smart cutting tools with embedded optical fiber sensors using combined laser solid freeform fabrication and moulding techniques,” Optics and Lasers in Engineering, vol. 45, no. 10, pp. 1010–1017, 2007. View at Publisher · View at Google Scholar · View at Scopus
  64. S. Mandal and N. Nagahanumaiah, Dynamic Health Monitoring in Micro Turning Process: A Multisensory Approach, LAP Lambert Academic Publishing, Saarbrücken, Germany, 2012.
  65. Fiber Optic Rotary Joint Product Guide, Catalogue of Moog Company, New York, NY, USA.
  66. P. Muñoz-Escalona, N. Díaz, and Z. Cassier, “Prediction of tool wear mechanisms in face milling AISI 1045 steel,” Journal of Materials Engineering and Performance, vol. 21, pp. 797–808, 2012. View at Publisher · View at Google Scholar · View at Scopus
  67. A. K. S. Jardine, D. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics implementing condition-based maintenance,” Mechanical Systems and Signal Processing, vol. 20, no. 7, pp. 1483–1510, 2006. View at Publisher · View at Google Scholar · View at Scopus
  68. H. Shao, H. L. Wang, and X. M. Zhao, “A cutting power model for tool wear monitoring in milling,” International Journal of Machine Tools and Manufacture, vol. 44, no. 14, pp. 1503–1509, 2004. View at Publisher · View at Google Scholar · View at Scopus
  69. P. Palanisamy, I. Rajendran, and S. Shanmugasundaram, “Prediction of tool wear using regression and ANN models in end-milling operation,” International Journal of Advanced Manufacturing Technology, vol. 37, no. 1-2, pp. 29–41, 2008. View at Publisher · View at Google Scholar · View at Scopus
  70. O. Geramifard, J. X. Xu, J. H. Zhou, and X. Li, “A physically segmented hidden Markov model approach for continuous tool condition monitoring: diagnostics and prognostics,” IEEE Transactions on Industrial Informatics, vol. 8, pp. 964–973, 2012. View at Google Scholar
  71. P. S. Sivasakthivel, V. V. Murugan, and R. Sudhakaran, “Prediction of tool wear from machining parameters by response surface methodology in end milling,” International Journal of Engineering Science and Technology, vol. 2, pp. 1780–1789, 2010. View at Google Scholar
  72. P.-T. Huang, J. C. Chen, and C.-Y. Chou, “A statistical approach in detecting tool breakage in end milling operations,” Journal of Industrial Technology, vol. 15, no. 3, pp. 1–7, 1999. View at Google Scholar · View at Scopus
  73. Y.-W. Hsueh and C.-Y. Yang, “Prediction of tool breakage in face milling using support vector machine,” International Journal of Advanced Manufacturing Technology, vol. 37, no. 9-10, pp. 872–880, 2008. View at Publisher · View at Google Scholar · View at Scopus
  74. M. Salahshoor and H. Ahmadian, “Continuous model for analytical prediction of chatter in milling,” International Journal of Machine Tools and Manufacture, vol. 49, no. 14, pp. 1136–1143, 2009. View at Publisher · View at Google Scholar · View at Scopus
  75. M. M. Ravikumar and A. Bhaskar, “Prediction of chatter in milling,” Journal of Theoretical and Applied Information Technology, pp. 406–409, 2005. View at Google Scholar
  76. Z. Dombovari, A. Iglesias, M. Zatarain, and T. Insperger, “Prediction of multiple dominant chatter frequencies in milling processes,” International Journal of Machine Tools and Manufacture, vol. 51, no. 6, pp. 457–464, 2011. View at Publisher · View at Google Scholar · View at Scopus
  77. K. Akazawa and E. Shamoto, “Study on regenerative chatter vibration in ball end milling of flexible workpieces,” in Proceedings of the International Symposium on Micro-NanoMechatronics and Human Science, pp. 1–6, November 2008.
  78. C. W. Hung and M. C. Lu, “Model development for tool wear effect on AE signal generation in micromilling,” International Journal of Advanced Manufacturing Technology, vol. 66, no. 9–12, pp. 1845–1858, 2013. View at Publisher · View at Google Scholar
  79. K.-N. Lou and C.-J. Lin, “An intelligent sensor fusion system for tool monitoring on a machining centre,” International Journal of Advanced Manufacturing Technology, vol. 13, no. 8, pp. 556–565, 1997. View at Google Scholar · View at Scopus
  80. M. L. Elbestawi and M. Dumitrescu, “Tool condition monitoring in machining- neural networks,” in Information Technology for Balanced Manufacturing Systems, vol. 220, pp. 5–16, Springer, 2006. View at Google Scholar
  81. S. Cho, S. Binsaeid, and S. Asfour, “Design of multisensor fusion-based tool condition monitoring system in end milling,” International Journal of Advanced Manufacturing Technology, vol. 46, no. 5–8, pp. 681–694, 2010. View at Publisher · View at Google Scholar · View at Scopus
  82. W. H. Wang, G. S. Hong, Y. S. Wong, and K. P. Zhu, “Sensor fusion for online tool condition monitoring in milling,” International Journal of Production Research, vol. 45, no. 21, pp. 5095–5116, 2007. View at Publisher · View at Google Scholar · View at Scopus
  83. R. K. Dutta, S. Paul, and A. B. Chattopadhyay, “Fuzzy controlled backpropagation neural network for tool condition monitoring in face milling,” International Journal of Production Research, vol. 38, no. 13, pp. 2989–3010, 2000. View at Google Scholar · View at Scopus
  84. M. Malekian, S. S. Park, and M. B. G. Jun, “Tool wear monitoring of micro-milling operations,” Journal of Materials Processing Technology, vol. 209, no. 10, pp. 4903–4914, 2009. View at Publisher · View at Google Scholar · View at Scopus