Table of Contents
Journal of Industrial Mathematics
Volume 2014 (2014), Article ID 543056, 10 pages
http://dx.doi.org/10.1155/2014/543056
Research Article

Cross Correlation for Condition Monitoring of Variable Load and Speed Gearboxes

Bharti School of Engineering, Laurentian University, Sudbury, ON, Canada P3E 2C6

Received 31 July 2014; Accepted 22 November 2014; Published 22 December 2014

Academic Editor: Domenico Vitulano

Copyright © 2014 Jordan McBain and Markus Timusk. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. McBain and M. Timusk, “Fault detection in variable speed machinery: statistical parameterization,” Journal of Sound and Vibration, vol. 327, no. 3–5, pp. 623–646, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. J. McBain and M. Timusk, Novelty Detection Augmented for Fault Detection in Variable Speed Machinery, 2012.
  3. H. Ohta and T. Aikawa, “Extraction method of failure component on vibration and acoustic signals generated by a reciprocal engine based on cross correlation of close two point signals and characteristic of paralleled Auto Regressive Model with Extra Input,” in Proceedings of the 23rd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM '10), pp. 333–340, July 2010. View at Scopus
  4. H. Zhang and S.-J. Wang, “Extraction of failure characteristic of rolling element bearing based on wavelet transform under strong noise,” Journal of Harbin Institute of Technology, vol. 12, no. 2, pp. 169–172, 2005. View at Google Scholar · View at Scopus
  5. Z. Ge, U. Kruger, L. Lamont, L. Xie, and Z. Song, “Fault detection in non-Gaussian vibration systems using dynamic statistical-based approaches,” Mechanical Systems and Signal Processing, vol. 24, no. 8, pp. 2972–2984, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Ruan, D. Roverso, P. F. Fantoni, J. I. Sanabrias, J. A. Carrasco, and L. Fernandez, “Integrating cross-correlation techniques and neural networks for feedwater flow measurement,” Progress in Nuclear Energy, vol. 43, no. 1–4, pp. 267–274, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. S.-D. Choi, B. Akin, M. M. Rahimian, and H. A. Toliyat, “Fault diagnosis implementation of induction machines based on advanced digital signal processing techniques,” in Proceedings of the 24th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '09), pp. 957–963, Washington, DC, USA, February 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Fujiwara, M. Kano, and S. Hasebe, “Correlation-based spectral clustering for flexible soft-sensor design,” in Proceedings of the 9th International Symposium on Dynamics and Control of Process Systems (DYCOPS '10), pp. 703–708, Leuven, Belgium, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Geisler and R. A. Guinee, “A novel correlation tester for multicore power cable fault finding and identification using pseudonoise sequences,” in Proceedings of the 44th International Universities Power Engineering Conference (UPEC '09), pp. 1–5, 2009.
  10. J. D. Jiang, J. Chen, and L. S. Qu, “The application of correlation dimension in gearbox condition monitoring,” Journal of Sound and Vibration, vol. 223, no. 4, pp. 529–541, 1999. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Parlar, “Vibration analysis and vibrating screens: theory and practice,” Paper AAINR74029, ETD Collection for Mcmaster University, 2011. View at Google Scholar
  12. M. R. Napolitano, V. Casdorph, C. Neppach, S. Naylor, M. Innocenti, and G. Silvestri, “Online learning neural architectures and cross-correlation analysis for actuator failure detection and identification,” International Journal of Control, vol. 63, no. 3, pp. 433–455, 1996. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. P. Rajamani, D. Dey, and S. Chakravorti, “Cross-correlation aided wavelet network for classification of dynamic insulation failures in transformer winding during impulse test,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 18, no. 2, pp. 521–532, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Wu and J. Q. Sun, “Cross-level fault detection and diagnosis of building HVAC systems,” Building and Environment, vol. 46, no. 8, pp. 1558–1566, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Wu and J.-Q. Sun, “Cross-level fault detection and diagnosis of building HVAC systems,” Building and Environment, vol. 46, no. 8, pp. 1558–1566, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Sohn, K. Worden, and C. R. Farrar, “Novelty detection under changing environmental conditions,” in Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, 108, vol. 4330 of Proceedings of SPIE, Newport Beach, Calif, USA, March 2001. View at Publisher · View at Google Scholar
  17. F. K. Choy, S. Huang, J. J. Zakrajsek, R. F. Handschuh, and D. P. Townsend, “Vibration signature analysis of a faulted gear transmission system,” Journal of Propulsion and Power, vol. 12, no. 2, pp. 289–295, 1996. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Kar and A. R. Mohanty, “Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform,” Journal of Sound and Vibration, vol. 311, no. 1-2, pp. 109–132, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. N. Roy and R. Ganguli, “Filter design using radial basis function neural network and genetic algorithm for improved operational health monitoring,” Applied Soft Computing Journal, vol. 6, no. 2, pp. 154–169, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Roy and R. Ganguli, “Helicopter rotor blade frequency evolution with damage growth and signal processing,” Journal of Sound and Vibration, vol. 283, no. 3–5, pp. 821–851, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. M. A. Timusk, M. G. Lipsett, and C. K. Mechefske, “Automated duty cycle classification for online monitoring systems,” in Proceedings of the 1st Biennial Conference on Mechanical Vibration and Noise, Parts A, B, and C, vol. 1, pp. 563–573, September 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Timusk, M. Lipsett, and C. K. Mechefske, “Fault detection using transient machine signals,” Mechanical Systems and Signal Processing, vol. 22, no. 7, pp. 1724–1749, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. M. A. Timusk, “A unified method for anomaly detection in unsteady systems,” in Proceedings 21st Canadian Machinery Vibration Association Vibration Seminar, 2006.
  24. M. A. Timusk, C. K. Mechefske, and M. Lipsett, “A pragmatic framework for on-line neural network based detection of machinery,” International Journal of COMADEM, vol. 8, no. 1, pp. 35–41, 2005. View at Google Scholar · View at Scopus
  25. K. Worden, H. Sohn, and C. R. Farrar, “Novelty detection in a changing environment: regression and inter polation approaches,” Journal of Sound and Vibration, vol. 258, no. 4, pp. 741–761, 2002. View at Publisher · View at Google Scholar · View at Scopus
  26. J. McBain and M. Timusk, “System identification for fault detection in variable speed and load machinery,” International Journal of Condition Monitoring, vol. 2, no. 2, pp. 32–39, 2012. View at Google Scholar
  27. M. Verhaegen, Filtering and System Identification: A Least-Squares Approach, Cambridge University Press, 2007. View at Publisher · View at Google Scholar · View at MathSciNet
  28. R. O. Duda, P. E. Hart, and D. G. Stork, Pattern Classification, Wiley-Interscience, New York, NY, USA, 2nd edition, 2001. View at MathSciNet
  29. M. Timusk, D. Crymble, and J. McBain, “An integrated flexible platform for development of fault detection systems and duty cycle simulation,” in Proceedings of the 23rd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM '10), pp. 373–376, July 2010. View at Scopus
  30. C. K. Mechefske and L. Liu, “Fault detection and diagnosis in variable speed machines,” International Journal of COMADEM, vol. 5, no. 2, pp. 29–40, 2002. View at Google Scholar
  31. M. Markou and S. Singh, “Novelty detection: a review—part 2: neural network based approaches,” Signal Processing, vol. 83, no. 12, pp. 2499–2521, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Markou and S. Singh, “Novelty detection: a review—part 1: statistical approaches,” Signal Processing, vol. 83, no. 12, pp. 2481–2497, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. D. M. J. Tax and R. P. W. Duin, “Support vector domain description,” Pattern Recognition Letters, vol. 20, no. 11–13, pp. 1191–1199, 1999. View at Publisher · View at Google Scholar · View at Scopus
  34. K. P. Bennett and C. Campbell, “Support vector machines: hype or hallelujah?” ACM SIGKDD Explorations Newsletter, vol. 2, no. 2, pp. 1–13, 2000. View at Publisher · View at Google Scholar