Table of Contents
Journal of Metallurgy
Volume 2009, Article ID 853092, 4 pages
Research Article

Machinable Cu-40 % Zn Composites Containing Graphite Particles by Powder Metallurgy Process

1Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaragi, Osaka 567-0047, Japan
2Development and engineering division, SAN-ETSU METAL Co. Ltd, 1892 Ota, Tonami, Toyama 939-1315, Japan

Received 29 December 2008; Accepted 11 March 2009

Academic Editor: Ludo Froyen

Copyright © 2009 Katsuyoshi Kondoh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Kumar, T. S. N. S. Narayanan, A. Manimaran, and M. S. Kumar, “Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution,” Materials Chemistry and Physics, vol. 106, no. 1, pp. 134–141, 2007. View at Publisher · View at Google Scholar
  2. P. K. Rohatgi, S. Ray, D. Nath, and N. Church, “Lead-free machinable copper alloy castings containing graphite,” AFS Transactions, vol. 100, pp. 1–9, 1992. View at Google Scholar
  3. A. Saigal and P. K. Rohatgi, “Machinability of cast lead-free yellow brass containing graphite particles,” AFS Transactions, vol. 104, pp. 225–228, 1996. View at Google Scholar
  4. P. K. Rohatgi, J. Kim, J. Sobczak, and N. Sobczak, “Casting of copper alloys containing dispersed graphite particles in rotating moulds,” Foundryman, vol. 91, no. 5, pp. 167–170, 1998. View at Google Scholar
  5. T. Kobayashi, T. Maruyama, K. Nakao, and Y. Murakami, “Structure and machinability on hot extrusion material of Pb free Cu-Zn system alloy which dispersed fine graphite particles,” Journal of Japan Research Institute for Advanced Copper-Base Materials and Technologies, vol. 42, pp. 223–228, 2003. View at Google Scholar
  6. O. D. Neikov, Yu. V. Milman, A. I. Sirko, A. V. Sameljuk, and A. V. Krajnikov, “Elevated temperature aluminum alloys produced by water atomization,” Materials Science and Engineering A, vol. 477, no. 1-2, pp. 80–85, 2008. View at Publisher · View at Google Scholar