Table of Contents
Journal of Metallurgy
Volume 2011 (2011), Article ID 673685, 15 pages
http://dx.doi.org/10.1155/2011/673685
Review Article

Surface Modification and Alloying of Aluminum and Titanium Alloys with Low-Energy, High-Current Electron Beams

1Laboratory of Vacuum Electronics, Institute of High Current Electronics, 2/3, Academichesky Avenue, Tomsk 634055, Russia
2Department of Applied Mechanics, Tomsk State Pedagogical University, 60, Kievskaya Street, Tomsk 634061, Russia
3Department “Technologies of Production of Engines for Flying Vehicles”, Moscow Aviation Institute, 4, Volokolamskoe Shosse, Moscow 125993, Russia

Received 17 February 2011; Accepted 6 April 2011

Academic Editor: Jianxin Zou

Copyright © 2011 V. P. Rotshtein and V. A. Shulov. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. I. Proskurovsky, V. P. Rotshtein, and G. E. Ozur, “Use of low-energy, high-current electron beams for surface treatment of materials,” Surface and Coatings Technology, vol. 96, no. 1, pp. 117–122, 1997. View at Google Scholar · View at Scopus
  2. D. I. Proskurovsky, V. P. Rotshtein, G. E. Ozur et al., “Pulsed electron-beam technology for surface modification of metallic materials,” Journal of Vacuum Science and Technology, vol. 16, no. 4, pp. 2480–2488, 1998. View at Google Scholar · View at Scopus
  3. G. E. Ozur, D. I. Proskurovsky, V. P. Rotshtein, and A. B. Markov, “Production and application of low-energy high-current electron beams,” Laser and Particle Beams, vol. 21, no. 2, pp. 157–174, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. A. B. Markov and V. P. Rotshtein, “Calculation and experimental determination of dimensions of hardening and tempering zones in quenched U7A steel irradiated with a pulsed electron beam,” Nuclear Instruments and Methods in Physics Research, Section, vol. 132, no. 1, pp. 79–86, 1997. View at Google Scholar · View at Scopus
  5. V. P. Rotshtein, A. B. Markov, and Y. F. Ivanov, “Surface treatment of materials with low-energy, high-current electron beam,” in Materials Surface Processing by Directed Energy Techniques, Y. Pauleau, Ed., chapter 6, pp. 205–240, Elsevier, Amsterdam, The Netherlands, 2006. View at Google Scholar
  6. D. I. Proskurovsky, V. P. Rotshtein, G. E. Ozur, Y. F. Ivanov, and A. B. Markov, “Physical foundations for surface treatment of materials with low energy, high current electron beams,” Surface and Coatings Technology, vol. 125, no. 1–3, pp. 49–56, 2000. View at Google Scholar · View at Scopus
  7. Y. Ivanov, W. Matz, V. Rotshtein, R. Gunzel, and N. Shevchenko, “Pulsed electron-beam melting of high-speed steel: structural phase transformations and wear resistance,” Surface and Coatings Technology, vol. 150, no. 2-3, pp. 188–198, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. D. S. Nazarov, A. B. Markov, G. E. Ozur et al., “Modification of the structure and properties of aluminium alloys by low energy high current electron beams,” in Proceedings of the 5th International Conference on Electron Beam Technologies, pp. 209–214, Varna, Bulgaria, June 1997.
  9. I. M. Goncharenko, V. I. Itin, S. V. Isichenko et al., “Increasing of corrosion resistance of the 12X18H10T steel irradiated by low-energy high-current electron beam,” Protection of Metals, vol. 29, no. 6, pp. 932–937, 1993. View at Google Scholar
  10. V. P. Rotshtein, D. I. Proskurovsky, G. E. Ozur, Y. F. Ivanov, and A. B. Markov, “Surface modification and alloying of metallic materials with low-energy high-current electron beams,” Surface and Coatings Technology, vol. 180-181, pp. 377–381, 2004. View at Google Scholar · View at Scopus
  11. V. P. Rotshtein, Y. F. Ivanov, A. B. Markov et al., “Surface alloying of stainless steel 316 with copper using pulsed electron-beam melting of film-substrate system,” Surface and Coatings Technology, vol. 200, no. 22-23, pp. 6378–6383, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. A. V. Batrakov, A. B. Markov, G. E. Ozur, D. I. Proskurovsky, and V. P. Rotshtein, “Surface alloying of metallic substrates with pre-deposited films through a pulsed electron-beam mixing,” The European Physical Journal, vol. 43, no. 3, pp. 283–288, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. V. P. Rotshtein, A. B. Markov, N. Shevchenko, H. Reuther, K. V. Oskomov, and V. A. Shulov, “Surface doping of VT6 alloy with zirconium by pulsed electron-beam mixing of predeposited multilayer Zr/Ti film,” Technical Physics Letters, vol. 34, no. 10, pp. 891–894, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. V. P. Rotshtein, Y. F. Ivanov, Y. A. Kolubaeva et al., “Synthesis of Ti3Al/TiAl based surface alloys by pulsed electron-beam melting of Al/Ti film-substrate system,” in Proceedings of the 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, pp. 416–419, Tomsk, Russia, 2010.
  15. V. P. Rotshtein, Y. F. Ivanov, Y. A. Kolubaeva et al., “Synthesis of Ti3Al and TiAl based surface alloys by pulsed electron-beam melting of Al (film)/Ti (substrate) system,” Technical Physics Letters, vol. 37, no. 3, pp. 226–229, 2011. View at Google Scholar
  16. S. F. Gnyusov, S. Y. Tarasov, Y. F. Ivanov, and V. P. Rothstein, “The effect of pulsed electron beam melting on microstructure,friction and wear of WC-Hadfield steel hard metal,” Wear, vol. 257, no. 1-2, pp. 97–103, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. K. M. Zhang, D. Z. Yang, J. X. Zou, T. Grosdidier, and C. Dong, “Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment,” Surface and Coatings Technology, vol. 201, no. 6, pp. 3096–3102, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. J. X. Zou, T. Grosdidier, K. M. Zhang, and C. Dong, “Cross-sectional analysis of the graded microstructure in an AISI D2-steel treated with low energy high-current pulsed electron beam,” Applied Surface Science, vol. 255, no. 9, pp. 4758–4764, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Grosdidier, J. X. Zou, B. Bolle, S. Z. Hao, and C. Dong, “Grain refinement, hardening and metastable phase formation by high current pulsed electron beam (HCPEB) treatment under heating and melting modes,” Journal of Alloys and Compounds, vol. 504, supplement 1, pp. S508–S511, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. J. X. Zou, K. M. Zhang, S. Z. Hao, C. Dong, and T. Grosdidier, “Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment,” Thin Solid Films, vol. 519, no. 4, pp. 1404–1415, 2010. View at Google Scholar
  21. E. Dudarev, G. Pochivalova, D. Proskurovsk, V. Rotshtein, and A. Markov, “Microplastic deformation of polycrystalline iron and molybdenum subjected to high-current electron-beam irradiation,” Russian Physics Journal, vol. 39, no. 3, pp. 284–288, 1996. View at Google Scholar · View at Scopus
  22. W. Mullins and R. Secerka, “Stability of a planar interface during solidification of a dilute binary alloy,” Journal of Applied Physics, vol. 35, pp. 444–451, 1964. View at Google Scholar
  23. A. Cullis, D. Hurle, H. Webber et al., “Growth interface breakdown during laser recrystallization from the melt,” Applied Physics Letters, vol. 38, no. 8, pp. 642–644, 1981. View at Publisher · View at Google Scholar · View at Scopus
  24. N. A. Nochovnaya, V. A. Shulov, V. P. Rotshtein et al., “Modification of the structure and properties of titanium alloys by low-energy, high-current electron beams,” in Proceedings of the 5th International Conference on Electron Beam Technologies, pp. 215–220, Varna, Bulgaria, June 1997.
  25. N. A. Nochovnaya, V. A. Shulov, D. S. Nazarov et al., “Treatment of parts made of titanium alloys with low-energy, high-current electron beams of microsecond duration,” Fizika i Khimiya Obrabotki Materialov, vol. 1, pp. 27–33, 1998. View at Google Scholar
  26. K. Uemura, S. Uehara, P. Raharjo, D. I. Proskurovsky, G. E. Ozur, and V. P. Rotshtein, “Surface modification process on metal dentures, products produced thereby, and the incorporated system thereof,” US Patent, US 6863531 B2, 2006.
  27. V. P. Rotshtein, Y. F. Ivanov, D. I. Proskurovsky, K. V. Karlik, I. A. Shulepov, and A. B. Markov, “Microstructure of the near-surface layers of austenitic stainless steels irradiated with a low-energy, high-current electron beam,” Surface and Coatings Technology, vol. 180-181, pp. 382–386, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. V. P. Rotshtein, R. Gunzel, A. B. Markov et al., “Surface modification of titanium alloy with a low-energy high-current electron beam at elevated initial temperatures,” Fizika i Himiya Obrabotki Materialov, vol. 1, pp. 62–72, 2006 (Russian). View at Google Scholar
  29. C. Leyens and M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, Germany, 2003.
  30. N. D. Tomashov, “The development of the structural electrochemical theory of the corrosion of metals and alloys,” Protection of Metals, vol. 22, no. 6, pp. 679–691, 1986. View at Google Scholar · View at Scopus
  31. J. Poate, G. Remini, and D. Jacobson , Surface Modification and Alloying by Laser, Ion, and Electron Beams, Plenum Press, New York, NY, USA, 1983.
  32. C. Blanco-Pinzon, Z. Liu, K. Voisey et al., “Excimer laser surface alloying of titanium with nickel and palladium for increased corrosion resistance,” Corrosion Science, vol. 47, no. 5, pp. 1251–1269, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. E. D'Anna, G. Leggieri, and A. Luches, “Thin film processing with pulsed electron beams,” Thin Solid Films, vol. 182, no. 1-2, pp. 215–228, 1989. View at Google Scholar · View at Scopus
  34. T. J. Renk, R. G. Buchheit, N. R. Sorensen, and D. Cowell, “Improvement of surface properties by modification and alloying with high-power ion beams,” Physics of Plasmas, vol. 5, no. 5, pp. 2144–2150, 1998. View at Google Scholar · View at Scopus
  35. Z. Werner, J. Piekoszewski, W. Szymczyk et al., “Palladium profiles in titanium treated by high-intensity plasma pulses,” Surface and Coatings Technology, vol. 158-159, pp. 21–27, 2002. View at Publisher · View at Google Scholar · View at Scopus
  36. E. Richter, J. Piekoszewski, E. Wieser et al., “Modification of titanium surface by its alloying with silicon using intense pulsed plasma beams,” Surface and Coatings Technology, vol. 158-159, pp. 324–327, 2002. View at Publisher · View at Google Scholar · View at Scopus
  37. S. G. Steineman, “Corrosion of surgical implants—in vivo and in vitro tests,” in Evaluation of Biomaterials, G. D. Winter, J. L. Leroy, and K. de Goot, Eds., pp. 1–34, John Wiley & Sons, Chichester, England, 1980. View at Google Scholar
  38. S. S. Gorelik, Recrystallization of Metals and Alloys, Metallurgy, Mir Publishers, Moscow, Russia, 2nd edition, 1978.
  39. F. H. Froes, C. Suryanarayana, and D. Eliezer, “Synthesis, properties and applications of titanium aluminides,” Journal of Materials Science, vol. 27, no. 19, pp. 5113–5140, 1992. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Leyens, M. Peters, and W. A. Kaysser, “Intermetallic Ti-Al coatings for protection of titanium alloys: oxidation and mechanical behavior,” Surface and Coatings Technology, vol. 94-95, pp. 34–40, 1997. View at Google Scholar · View at Scopus
  41. J. Hampshire, P. J. Kelly, and D. G. Teer, “Structure and mechanical properties of co-deposited TiAl thin films,” Thin Solid Films, vol. 420-421, pp. 386–391, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. I. Tsyganov, E. Wieser, W. Matz et al., “Phase formation in aluminum implanted titanium and the correlated modification of mechanical and corrosive properties,” Thin Solid Films, vol. 376, no. 1-2, pp. 188–197, 2000. View at Publisher · View at Google Scholar · View at Scopus
  43. H. P. Qu and H. M. Wang, “Microstructure and mechanical properties of laser melting deposited γ-TiAl intermetallic alloys,” Materials Science and Engineering, vol. 466, no. 1-2, pp. 187–194, 2007. View at Google Scholar
  44. S. A. Popov, D. I. Proskurovsky, E. L. Pryadko et al., “High-current pulsed vacuum-arc evaporator for surface-alloying technologies,” IEEE Transactions on Plasma Science, vol. 37, no. 8, pp. 1504–1510, 2009. View at Publisher · View at Google Scholar · View at Scopus
  45. J. L. Murray, Phase Diagrams of Binary Titanium Alloys, ASM International, Metals Park, Ohio, USA, 2nd edition, 1987.