Table of Contents
Journal of Metallurgy
Volume 2011, Article ID 747198, 5 pages
http://dx.doi.org/10.1155/2011/747198
Research Article

A Study of the Quench Sensitivity of 6061-T6 and 6069-T6 Aluminum Alloys

1Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA 90089, USA
2LSI Logic, Gresham, OR 97006, USA

Received 28 August 2010; Accepted 23 March 2011

Academic Editor: Chong Soo Lee

Copyright © 2011 M. E. Kassner et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. C. Bergsma, M. E. Kassner, X. Li, and M. A. Wall, “Strengthening in the new aluminum alloy AA 6069,” Materials Science and Engineering A, vol. 254, pp. 161–171, 1998. View at Google Scholar
  2. F. J. MacMaster, K. S. Chan, S. C. Bergsma, and M. E. Kassner, “Aluminum alloy 6069 part II: fracture toughness of 6061-T6 and 6069-T6,” Materials Science and Engineering A, vol. 289, no. 1-2, pp. 54–59, 2000. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Li, M. E. Kassner, and S. C. Bergsma, “Recrystallization behavior of rolled ingots of 6061 and 6069 aluminum alloys,” Journal of Materials Engineering and Performance, vol. 9, pp. 416–423, 2000. View at Google Scholar
  4. D. V. Gullotti, J. Crane, and W. C. Setzer, “Isothermal transformation characteristics of several 6XXX series alloys,” in Proceedings of 2nd International Aluminum Extrusion Technology Seminar, p. 249, Atlanta, Ga, USA, 1977.
  5. H. Zoller and A. Ried, “Metallurgical aspects in development of AL MG SI alloys with a low sensitivity to quenching,” Z Metallkd, vol. 62, pp. 354–358, 1971. View at Google Scholar
  6. S. C. Bergsma, M. E. Kassner, X. Li, and R. S. Rosen, “The Quench Sensitivity of Hot Extruded 6061-T6 and 6069-T6 Aluminum Alloys,” in Proceedings of THERMEC International Conference on Processing and Manufacturing of Advanced Materials, T. Chandra, K. Higashi, C. Suryanarayana, and C. Tome, Eds., CD Proceedings, Las Vegas, Nev, USA, December 2000, Session A4.
  7. L. F. Mondolfo, Aluminum Alloys: Structure and Properties, Butterworths, London, UK, 1976.
  8. S. Camero, E. S. Puchi, and G. Gonzalez, “Effect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al-6063 commercial alloy,” Journal of Materials Science, vol. 41, no. 22, pp. 7361–7373, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Matsuda, Y. Sakaguchi, Y. Miyata et al., “Precipitation sequence of various kinds of metastable phases in Al-1.0mass% Mg2Si-0.4mass% Si alloy,” Journal of Materials Science, vol. 35, no. 1, pp. 179–189, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Muruyana and K. Hono, “Pre-precipitate clusters and precipitation processes in Al-Mg-Si alloys,” Acta Materialia, vol. 47, pp. 1537–1548, 1999. View at Google Scholar