Table of Contents
Journal of Metallurgy
Volume 2011 (2011), Article ID 895146, 5 pages
http://dx.doi.org/10.1155/2011/895146
Review Article

Survey of BGFA Criteria for the Cu-Based Bulk Amorphous Alloys

Hungarian Academy of Science-University of Miskolc, Materials Science Research Group, Miskolc-Egyetemvaros H3515, Hungary

Received 25 August 2010; Revised 18 November 2010; Accepted 24 November 2010

Academic Editor: Livio Battezzati

Copyright © 2011 D. Janovszky et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. C. Kim, J. C. Lee, P. R. Cha, J. P. Ahn, and E. Fleury, “Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses,” Materials Science and Engineering A, vol. 437, no. 2, pp. 248–253, 2006. View at Publisher · View at Google Scholar
  2. A. Inoue, “Stabilization of metallic supercooled liquid and bulk amorphous alloys,” Acta Materialia, vol. 48, no. 1, pp. 279–306, 2000. View at Publisher · View at Google Scholar
  3. T. Egami and Y. Waseda, “Atomic size effect on the formability of metallic glasses,” Journal of Non-Crystalline Solids, vol. 64, no. 1-2, pp. 113–134, 1984. View at Google Scholar
  4. Z. Bangwei, X. Haowen, and L. Shuzhi, “Amorphous forming ability in the ternary Cu-Sn-P system by mechanical alloying,” Journal of Materials Processing Technology, vol. 89-90, pp. 378–384, 1999. View at Publisher · View at Google Scholar
  5. A. R. Miedema, “Energy effects and charge transfer in metal physics; modelling in real space,” Physica B, vol. 182, no. 1, pp. 1–17, 1992. View at Google Scholar
  6. H. Men, S. J. Pang, and T. Zhang, “Glass-forming ability and mechanical properties of Cu50Zr50xTix alloys,” Materials Science and Engineering A, vol. 408, no. 1-2, pp. 326–329, 2005. View at Publisher · View at Google Scholar
  7. Z. Bangwei and X. Haowen, “Effect of alloying elements on the amorphous formation and corrosion resistance of electroless Ni-P based alloys,” Materials Science and Engineering A, vol. 281, no. 1-2, pp. 286–291, 2000. View at Google Scholar
  8. H. M. Fu, H. Wang, H. F. Zhang, and Z. Q. Hu, “The effect of Gd addition on the glass-forming ability of Cu-Zr-Al alloy Scripta Materialia,” Scripta Materialia, vol. 55, no. 2, pp. 147–150, 2006. View at Google Scholar
  9. E. S. Park, H. J. Chang, D. H. Kim, T. Ohkubo, and K. Hono, “Effect of the substitution of Ag and Ni for Cu on the glass forming ability and plasticity of CuZrTi alloy,” Scripta Materialia, vol. 54, no. 9, pp. 1569–1573, 2006. View at Publisher · View at Google Scholar
  10. Y. C. Kim, J. C. Lee, P. R. Cha, J. P. Ahn, and E. Fleury, “Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses,” Materials Science and Engineering A, vol. 437, no. 2, pp. 248–253, 2006. View at Publisher · View at Google Scholar
  11. O. N. Senkov and D. B. Miracle, “Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys,” Materials Research Bulletin, vol. 36, no. 12, pp. 2183–2198, 2001. View at Publisher · View at Google Scholar
  12. Z. P. Lu and C. T. Liu, “A new glass-forming ability criterion for bulk metallic glasses,” Acta Materialia, vol. 50, no. 13, pp. 3501–3512, 2002. View at Publisher · View at Google Scholar
  13. E. S. Park, D. H. Kim, and W. T. Kim, “Parameter for glass forming ability of ternary alloy systems,” Applied Physics Letters, vol. 86, no. 6, Article ID 061907, 3 pages, 2005. View at Publisher · View at Google Scholar
  14. I. Kuti and A. Roosz, “Modelling of microsegregation of binary solid solution,” Materials Science Forum, vol. 329-330, pp. 49–55, 2000. View at Google Scholar
  15. B. A. Richardson and D. H. Kirkwood, “Microsegregation in Fe-Cr-C alloys solidified under steady-state conditions,” in Proceedings of the Conference on Solidification and Casting of Metals, pp. 44–52, 1977.
  16. T. F. Bower, H. D. Brody, and M. C. Flemings, “Measurement of solute redistribution in dendritic solidification,” Transaction of Metallurgical Society of AIME, vol. 236, no. 5, pp. 624–634, 1998. View at Publisher · View at Google Scholar
  17. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka, “Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa,” Journal of Non-Crystalline Solids, vol. 304, no. 1–3, pp. 200–209, 2002. View at Publisher · View at Google Scholar