Table of Contents
Journal of Metallurgy
Volume 2012, Article ID 154617, 7 pages
http://dx.doi.org/10.1155/2012/154617
Research Article

Precipitation of Phase Using General Diffusion Equation with Comparison to Vitek Diffusion Model in Dissimilar Stainless Steels

Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Road, Taichung 402, Taiwan

Received 16 August 2012; Accepted 16 October 2012

Academic Editor: Chih-Ming Chen

Copyright © 2012 Chih-Chun Hsieh and Weite Wu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Missori and C. Koerber, “Laser beam welding of austenitic-rerritic transition joints,” Welding Journal, vol. 76, no. 12, pp. 125S–134S, 1997. View at Google Scholar · View at Scopus
  2. B. Sun, Y. J. Li, Q. Chi, and X. S. Zhang, “Analysis of the microstructure in the weld zone of 0Cr18Mo2 and 1Cr18Ni9Ti dissimilar stainless steel,” Chemical Engineering and Machinery, vol. 31, no. 1, pp. 17–23, 2004. View at Google Scholar
  3. P. Michael, S. Oliver, and G. Thomas, “Effect of intermetallic precipitations on the properties of duplex stainless steel,” Materials Characterization, vol. 58, pp. 65–71, 2007. View at Publisher · View at Google Scholar
  4. R. F. Steigerwald, “Effects of metallic second phases in stainless steels,” Corrosion, vol. 33, no. 9, pp. 338–343, 1977. View at Google Scholar · View at Scopus
  5. H. Kiesheyer and H. Brandis, “Investigation of phase equilibria in the ternary system Fe-Cr-Mo in the solid state,” Zeitschrift fuer Metallkunde, vol. 67, no. 4, pp. 258–263, 1976. View at Google Scholar · View at Scopus
  6. C. J. Park, M. K. Ahn, and H. S. Kwon, “Influences of Mo substitution by W on the precipitation kinetics of secondary phases and the associated localized corrosion and embrittlement in 29% Cr ferritic stainless steels,” Materials Science and Engineering A, vol. 418, pp. 211–217, 2006. View at Publisher · View at Google Scholar
  7. M. Raghavan, G. A. Mueller, G. A. Vaughn, and S. Floreen, “Determination of isothermal sections of nickel rich portion of Ni-Cr-Mo system by analytical electron microscopy,” Metallurgical Transactions A, vol. 15, no. 5, pp. 783–792, 1984. View at Google Scholar · View at Scopus
  8. L. Karlsson, L. Ryen, and S. Pak, “Precipitation of intermetallic phases in 22% Cr duplex stainless weld metals,” Welding Journal, vol. 74, pp. 28S–40S, 1995. View at Google Scholar
  9. T. H. Chen, K. L. Weng, and J. R. Yang, “The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel,” Materials Science and Engineering A, vol. 338, no. 1-2, pp. 259–270, 2002. View at Publisher · View at Google Scholar
  10. J. O. Nilsson, P. Kangas, and T. Karlsson, “Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel,” Metallurgical and Materials Transactions A, vol. 31, pp. 35–45, 2000. View at Publisher · View at Google Scholar
  11. L. Jinchun, W. Tuyan, and R. Yves:, “δ phase precipitation and its effect on the mechanical properties of a super duplex stainless steel,” Materials Science and Engineering A, vol. 174, pp. 149–156, 1994. View at Publisher · View at Google Scholar
  12. A. Turnbull, P. E. Francis, M. P. Ryan, L. P. Orkney, A. J. Griffiths, and B. Hawkins, “A novel approach to characterizing the corrosion resistance of super duplex stainless steel welds,” Corrosion, vol. 58, no. 12, pp. 1039–1048, 2002. View at Google Scholar · View at Scopus
  13. D. Y. Lin, G. L. Liu, T. C. Chang, and H. C. Hsieh, “Microstructure development in 24Cr–14Ni–2Mn stainless steel after aging under various nitrogen/air ratios,” Journal of Alloys and Compounds, vol. 377, pp. 150–154, 2004. View at Publisher · View at Google Scholar
  14. C. C. Hsieh, D. Y. Lin, and W. Wu, “Precipitation behavior of σ phase in 19Cr–9Ni–2Mn and 18Cr–0.75Si stainless steels hot-rolled at 800°C with various reduction ratios,” Materials Science and Engineering A, vol. 467, pp. 181–189, 2007. View at Publisher · View at Google Scholar
  15. C. C. Hsieh, T. C. Chang, D. Y. Lin, and M. C. Chen, “Dispersion strengthening behavior of σ phase in 304 modified stainless steels during 1073 K hot rolling,” Metals and Materials International, vol. 13, pp. 359–363, 2007. View at Publisher · View at Google Scholar
  16. C. C. Hsieh, D. Y. Lin, and W. Wu, “Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process,” Metals and Materials International, vol. 13, pp. 411–416, 2007. View at Publisher · View at Google Scholar
  17. C. C. Hsieh, D. Y. Lin, and T. C. Chang, “Microstructural evolution during the δ/σ/γ phase transformation of the SUS 309LSi stainless steel after aging under various nitrogen atmospheric ratios,” Materials Science and Engineering A, vol. 475, no. 1-2, pp. 128–135, 2008. View at Publisher · View at Google Scholar
  18. C. C. Hsieh, X. Guo, and W. Wu, “Dendrite evolution of delta (δ) ferrite and precipitation behavior of sigma (σ) phase during multipass dissimilar stainless steels welding,” Metals and Materials International, vol. 16, pp. 349–356, 2010. View at Publisher · View at Google Scholar
  19. C. C. Hsieh and W. Wu, “Discussing the precipitation behavior of σ phase using diffusion equation and thermodynamic simulation in dissimilar stainless steels,” Journal of Alloys and Compounds, vol. 506, pp. 820–825, 2010. View at Publisher · View at Google Scholar
  20. E. Folkhard, G. Rabensteiner, E. Perteneder, H. Schabereiter, and J. Tösch, Welding Metallurgy of Stainless Steels, Springer, New York, NY, USA, 2004.