Table of Contents
Journal of Metallurgy
Volume 2012, Article ID 539823, 9 pages
http://dx.doi.org/10.1155/2012/539823
Research Article

Developing 1D MM of Axisymmetric Transient Quenched Chromium Steel to Determine LHP

Mechanical Engineering Department, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, 86400 Parit Raja, Malaysia

Received 4 November 2011; Revised 1 January 2012; Accepted 8 January 2012

Academic Editor: Elena V. Pereloma

Copyright © 2012 Abdlmanam S. A. Elmaryami and Badrul Omar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. N. Robert, Quenching and Tempering of Welded Steel Tubular, The Fabricator Articles, July 2001.
  2. B. Omar, M. Elshayb, and A. S. A. Elmaryami, “Unsteady state thermal Behavior of industrial quenched steel bar,” in Proceedings of the 18th World IMACS Congress and International Congress on Modelling and Simulation (MODSIM '09), Cairns, Australia, 2009.
  3. E. Mohamed and Y. K. Bing, Application of Finite Difference and Finite Element Methods, University Malaysia Sabah Kota Kinabalu, Sabah, Malaysia, 2000.
  4. A. S. A. Elmaryami and B. Omar, “Developing of unsteady state axi-symmetric FEMM to predict the temperature of industrial quenched steel,” Journal of Metals Science and Heat Treatment. In press.
  5. K. G. Budinski, Engineering Material: Properties and Selection, Prentice-Hall, Upper Saddle River, NJ, USA, 4th edition, 1992.
  6. A. S. A. Elmaryami, Heat treatment of steel by developing finite element mathematical model and by simulation, M.S. thesis, University Tun Hussein Onn, Johor, Malaysia, 2010.
  7. A. S. A. Elmaryami, S. B. Haji Hasan, B. Omar, and M. Elshayeb, “Customer reviews unsteady state hardness prediction of industrial quenched steel bar [One and Two Dimensional],” in Proceedings of the Materials Science & Technology Conference and Exhibition, Pittsburgh, Pa, USA, 2009.
  8. S. Moaveni, Finite Element Analysis; Theory and Application with ANSYS, Pearson Education International, 2008.
  9. A. Rose et al., Atlas zur Wärmebe- Handlung der Stähle I, Verlag Stahleisen, Düsseldorf, Germany, 1958.
  10. B. Smoljan, “Mathematical modelling of austenite decomposition during the quenching,” in Proceedings of the 13th International Scientific Conference Achievements in Mechanical and Materials Engineering, The Polish Academy of Science, 2005.
  11. B. Smoljan, “Prediction of mechanical properties and microstructure distribution of quenched and tempered steel shaft,” Journal of Materials Processing Technology, vol. 175, no. 1–3, pp. 393–397, 2006. View at Publisher · View at Google Scholar
  12. B. Donnay, J. C. Herman, V. Leroy, U. Lotter, R. Grossterlinden, and H. Pircher, Microstructure Evolution of C-Mn Steel in the Hot Deformation Process: The Stripcam Model.
  13. B. Liščić, “System for process analysis and hardness prediction when quenching axially-symmetrical workpieces of any shape in liquid quenchants,” Materials Science Forum, vol. 638-642, pp. 3966–3974, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Smoljan, D. Iljkić, and S. Smokvina Hanza, “Computer simulation of working stress of heat treated steel specimen,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 34, no. 2, pp. 152–156, 2009. View at Google Scholar
  15. R. I. Hsieh, H. Y. Liou, and Y. T. Pan, “Effects of cooling time and alloying elements on the microstructure of the Gleeble-simulated heat-affected zone of 22% Cr duplex stainless steels,” Journal of Materials Engineering and Performance, vol. 10, no. 5, pp. 526–536, 2001. View at Publisher · View at Google Scholar
  16. A. S. A. Elmaryami and B. Omar, “Computer simulation to predict the hardness of transient axi-symmetric industrial quenched steel bar at different radial axises,” International Journal of Emerging Technology in Science and Engineering. In press.
  17. A. S. A. Elmaryami and B. Omar, “Transient computer simulation of industrial quenched steel bar to determine LHP of molybdenum and boron steel at 850°C as austenitizing temperature quenched in different medium,” International Journal of Material Science. In press.
  18. H. Chandler, Hardness Testing Applications, Hardness Testing, ASM International, Indianapolis, Ind, USA, 2nd edition, 1999.