Research Article
Mould Filling Ability Characterisation of Cast Aluminium Alloys Using Design of Experiments
Table 3
L8 Orthogonal array.
| | Exp. run order | Alloy | Sand fineness (AFS no.) | Mould coat | Pouring temperature (°C) |
| | 1 | LM25 | 25 | Graphite (GC) | | | 2 | LM25 | 25 | No coating (NC) | | | 3 | LM25 | 40 | Graphite (GC) | | | 4 | LM25 | 40 | No coating (NC) | | | 5 | LM6 | 25 | No coating (NC) | | | 6 | LM6 | 25 | Graphite (GC) | | | 7 | LM6 | 40 | Graphite (GC) | | | 8 | LM6 | 40 | No coating (NC) | |
|
|
