Table of Contents
Journal of Metallurgy
Volume 2012 (2012), Article ID 989834, 6 pages
http://dx.doi.org/10.1155/2012/989834
Research Article

Prediction of Microstructure Evolution in Hot Backward Extrusion of Ti-6Al-4V Alloy

1Special Alloys Group, Korea Institute of Materials Science, 531 Changwondaero, Changwon 641-831, Republic of Korea
2Department of Materials Science and Engineering, POSTECH, San 31, Hyojadong, Namgu, Pohang 790-784, Republic of Korea

Received 28 September 2011; Accepted 21 October 2011

Academic Editor: Enrico Evangelista

Copyright © 2012 Jong-Taek Yeom et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jong-Taek Yeom, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park, and Chong Soo Lee, “Prediction of Microstructure Evolution in Hot Backward Extrusion of Ti-6Al-4V Alloy,” Journal of Metallurgy, vol. 2012, Article ID 989834, 6 pages, 2012. doi:10.1155/2012/989834