Table of Contents
Journal of Metallurgy
Volume 2013, Article ID 827491, 8 pages
http://dx.doi.org/10.1155/2013/827491
Research Article

XRD and DTA Analysis of Developed Agglomerated Fluxes for Submerged Arc Welding

1Department of Mechanical Engineering, Noida Institute of Engineering and Technology, Greater Noida 201306, India
2Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana 136119, India
3Division of MPAE, Netaji Subhas Institute of Technology, New Delhi 110078, India

Received 21 December 2012; Revised 9 February 2013; Accepted 11 February 2013

Academic Editor: Gerhard Sauthoff

Copyright © 2013 Ajay Kumar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ajay Kumar, Hari Singh, and Sachin Maheshwari, “XRD and DTA Analysis of Developed Agglomerated Fluxes for Submerged Arc Welding,” Journal of Metallurgy, vol. 2013, Article ID 827491, 8 pages, 2013. https://doi.org/10.1155/2013/827491.