Table of Contents
Journal of Metallurgy
Volume 2014 (2014), Article ID 387046, 14 pages
http://dx.doi.org/10.1155/2014/387046
Review Article

Progress in Wettability Study of Reactive Systems

Department of Mechanical Engineering, Concordia University, 1455 de Maisonneuve Boulevard West, Montreal, QC, Canada H3G 1M8

Received 1 December 2013; Revised 29 January 2014; Accepted 30 January 2014; Published 12 March 2014

Academic Editor: Sunghak Lee

Copyright © 2014 Bolarinwa Komolafe and Mamoun Medraj. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. G. De Gennes, “Wetting: statics and dynamics,” Reviews of Modern Physics, vol. 57, no. 3, pp. 827–863, 1985. View at Publisher · View at Google Scholar · View at Scopus
  2. D. R. Milner, “A survey of the scientific principles related to wetting and spreading,” British Welding Journal, vol. 5, pp. 90–105, 1958. View at Google Scholar
  3. C. A. Leon, V. H. Lopez, E. Bedolla, and R. A. L. Drew, “Wettability of TiC by commercial aluminum alloys,” Journal of Materials Science, vol. 37, no. 16, pp. 3509–3514, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. M. M. Schwartz, Brazing, ASM International, Materials Park, Ohio, USA, 1987.
  5. S. Amore, E. Ricci, G. Borzone, and R. Novakovic, “Wetting behaviour of lead-free Sn-based alloys on Cu and Ni substrates,” Materials Science and Engineering A, vol. 495, no. 1-2, pp. 108–112, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. B. Lavi and A. Marmur, “The exponential power law: partial wetting kinetics and dynamic contact angles,” Colloids and Surfaces A, vol. 250, no. 1–3, pp. 409–414, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. G. W. Liu, F. Valenza, M. L. Muolo, G. J. Qiao, and A. Passerone, “Wetting and interfacial behavior of Ni-Si alloy on different substrates,” Journal of Materials Science, vol. 44, no. 22, pp. 5990–5997, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Shafiei, P. Abachi, K. Dehghani, and K. Pourazarang, “On the formation of intermetallics during the furnace brazing of pure titanium to 304 stainless steel using Ag (30–50%)-Cu filler metals,” Materials and Manufacturing Processes, vol. 25, no. 11, pp. 1333–1340, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. T. D. Blake and K. J. Ruschak, “A maximum speed of wetting,” Nature, vol. 282, no. 5738, pp. 489–491, 1979. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Chatain and W. C. Carter, “Spreading of metallic drops,” Nature Materials, vol. 3, no. 12, pp. 843–845, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Saiz, M. Benhassine, J. De Coninck, and A. P. Tomsia, “Early stages of dissolutive spreading,” Scripta Materialia, vol. 62, no. 12, pp. 934–938, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Saiz, A. P. Tomsia, N. Rauch et al., “Nonreactive spreading at high temperature: molten metals and oxides on molybdenum,” Physical Review E, vol. 76, no. 4, Article ID 041602, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. E. Saiz and A. P. Tomsia, “Atomic dynamics and Marangoni films during liquid-metal spreading,” Nature Materials, vol. 3, no. 12, pp. 903–909, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Ondarçuhu and M. Veyssié, “Relaxation modes of the contact line of a liquid spreading on a surface,” Nature, vol. 352, no. 6334, pp. 418–420, 1991. View at Google Scholar · View at Scopus
  15. A. Eddi, K. G. Winkels, and J. H. Snoeijer, “Short time dynamics of viscous drop spreading,” Physics of Fluids, vol. 25, no. 1, Article ID 013102, 2013. View at Google Scholar
  16. V. H. López and A. R. Kennedy, “Flux-assisted wetting and spreading of Al on TiC,” Journal of Colloid and Interface Science, vol. 298, no. 1, pp. 356–362, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Bonn, J. Eggers, J. Indekeu, and J. Meunier, “Wetting and spreading,” Reviews of Modern Physics, vol. 81, no. 2, pp. 739–805, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. A. M. Cazabat, S. Gerdes, M. P. Valignat, and S. Villette, “Dynamics of wetting: from theory to experiment,” Interface Science, vol. 5, no. 2-3, pp. 129–139, 1997. View at Google Scholar · View at Scopus
  19. I. A. Aksay, C. E. Hoge, and J. A. Pask, “Wetting under chemical equilibrium and nonequilibrium conditions,” Journal of Physical Chemistry, vol. 78, no. 12, pp. 1178–1183, 1974. View at Google Scholar · View at Scopus
  20. A. M. Schwartz, “The dynamics of contact angle phenomena,” Advances in Colloid and Interface Science, vol. 4, no. 4, pp. 349–374, 1975. View at Google Scholar · View at Scopus
  21. C. Bergman, C. Girardeaux, C. Perrin-Pellegrino et al., “Wetting of decagonal Al13Co4 and cubic AlCo thin films by liquid Pb,” Philosophical Magazine, vol. 86, no. 6–8, pp. 849–854, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. M. E. R. Shanahan, “Simple analysis of local wetting hysteresis on a Wilhelmy plate,” Surface and Interface Analysis, vol. 17, no. 7, pp. 489–495, 1991. View at Google Scholar · View at Scopus
  23. L. Leger and J. F. Joanny, “Liquid spreading,” Reports on Progress in Physics, vol. 55, no. 4, pp. 431–486, 1992. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Kumar and K. N. Prabhu, “Review of non-reactive and reactive wetting of liquids on surfaces,” Advances in Colloid and Interface Science, vol. 133, no. 2, pp. 61–89, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. G. T. Barnes and I. R. Gentle, Interfacial Science: An Introduction, Oxford University Press, 2nd edition, 2011.
  26. A. B. D. Cassie, “Contact angles,” Discussions of the Faraday Society, vol. 3, pp. 11–16, 1948. View at Publisher · View at Google Scholar · View at Scopus
  27. D. Quéré, “Rough ideas on wetting,” Physica A, vol. 313, pp. 32–46, 2002. View at Google Scholar
  28. O. Kozlova, R. Voytovych, P. Protsenko, and N. Eustathopoulos, “Non-reactive versus dissolutive wetting of Ag-Cu alloys on Cu substrates,” Journal of Materials Science, vol. 45, no. 8, pp. 2099–2105, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. L. Yin, B. T. Murray, S. Su et al., “Reactive wetting in metal-metal systems,” Journal of Physics Condensed Matter, vol. 21, no. 46, Article ID 464130, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. P. R. Sharps, A. P. Tomsia, and J. A. Pask, “Wetting and spreading in the CuAg system,” Acta Metallurgica, vol. 29, no. 5, pp. 855–865, 1981. View at Google Scholar · View at Scopus
  31. J.-G. Li, “Wetting of ceramic materials by liquid silicon, aluminium and metallic melts containing titanium and other reactive elements: a review,” Ceramics International, vol. 20, no. 6, pp. 391–412, 1994. View at Google Scholar · View at Scopus
  32. J. C. Ambrose and M. G. Nicholas, “Wetting and spreading of nickel-phosphorus brazes: detailed real time observations of spreading on iron-chromium substrates,” Materials Science and Technology, vol. 12, no. 1, pp. 72–80, 1996. View at Google Scholar · View at Scopus
  33. F. Gnecco, E. Ricci, S. Amore et al., “Wetting behaviour and reactivity of lead free Au-In-Sn and Bi-In-Sn alloys on copper substrates,” International Journal of Adhesion and Adhesives, vol. 27, no. 5, pp. 409–416, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. H. Xu, Z. Yuan, H. Matsuura, and F. Tsukihashi, “Hysteresis phenomenon and wetting characteristics of molten Sn-3.0 wt.%Ag-0.5 wt.%Cu on different tilting substrates,” Journal of Alloys and Compounds, vol. 487, no. 1-2, pp. 121–125, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. P. R. Chidambaram, G. R. Edwards, and D. L. Olson, “A thermodynamic criterion to predict wettability at metal- alumina interfaces,” Metallurgical Transactions B, vol. 23, no. 2, pp. 215–222, 1992. View at Publisher · View at Google Scholar · View at Scopus
  36. D. Chatain, “Anisotropy of wetting,” Annual Review of Materials Research, vol. 38, pp. 45–70, 2008. View at Publisher · View at Google Scholar · View at Scopus
  37. S. J. Hitchcock, N. T. Carroll, and M. G. Nicholas, “Some effects of substrate roughness on wettability,” Journal of Materials Science, vol. 16, no. 3, pp. 714–732, 1981. View at Publisher · View at Google Scholar · View at Scopus
  38. T. D. Blake and J. de Coninck, “The influence of solid-liquid interactions on dynamic wetting,” Advances in Colloid and Interface Science, vol. 96, no. 1–3, pp. 21–36, 2002. View at Publisher · View at Google Scholar · View at Scopus
  39. J. C. Bird, S. Mandre, and H. A. Stone, “Short-time dynamics of partial wetting,” Physical Review Letters, vol. 100, no. 23, Article ID 234501, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. P. Protsenko, J.-P. Garandet, R. Voytovych, and N. Eustathopoulos, “Thermodynamics and kinetics of dissolutive wetting of Si by liquid Cu,” Acta Materialia, vol. 58, no. 20, pp. 6565–6574, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. R. Voitovitch, A. Mortensen, F. Hodaj, and N. Eustathopoulos, “Diffusion-limited reactive wetting: study of spreading kinetics of Cu-Cr alloys on carbon substrates,” Acta Materialia, vol. 47, no. 4, pp. 1117–1128, 1999. View at Publisher · View at Google Scholar · View at Scopus
  42. O. Dezellus, F. Hodaj, and N. Eustathopoulos, “Progress in modelling of chemical-reaction limited wetting,” Journal of the European Ceramic Society, vol. 23, no. 15, pp. 2797–2803, 2003. View at Publisher · View at Google Scholar · View at Scopus
  43. L. Yin, B. T. Murray, and T. J. Singler, “Dissolutive wetting in the Bi-Sn system,” Acta Materialia, vol. 54, no. 13, pp. 3561–3574, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. L. Yin, A. Chauhan, and T. J. Singler, “Reactive wetting in metal/metal systems: dissolutive versus compound-forming systems,” Materials Science and Engineering A, vol. 495, no. 1-2, pp. 80–89, 2008. View at Publisher · View at Google Scholar · View at Scopus
  45. B. He, J. Lee, and N. A. Patankar, “Contact angle hysteresis on rough hydrophobic surfaces,” Colloids and Surfaces A, vol. 248, no. 1–3, pp. 101–104, 2004. View at Publisher · View at Google Scholar · View at Scopus
  46. H. Tavana and A. W. Neumann, “On the question of rate-dependence of contact angles,” Colloids and Surfaces A, vol. 282-283, pp. 256–262, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. W. Li and A. Amirfazli, “A thermodynamic approach for determining the contact angle hysteresis for superhydrophobic surfaces,” Journal of Colloid and Interface Science, vol. 292, no. 1, pp. 195–201, 2005. View at Publisher · View at Google Scholar · View at Scopus
  48. A. Nakajima, “Design of hydrophobic surfaces for liquid droplet control,” NPG Asia Materials, vol. 3, no. 5, pp. 49–56, 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. X. S. Cui and W. Li, “On the possibility of superhydrophobic behavior for hydrophilic materials,” Journal of Colloid and Interface Science, vol. 347, no. 1, pp. 156–162, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. S. Vedantam and M. V. Panchagnula, “Constitutive modeling of contact angle hysteresis,” Journal of Colloid and Interface Science, vol. 321, no. 2, pp. 393–400, 2008. View at Publisher · View at Google Scholar · View at Scopus
  51. W. D. Kaplan, D. Chatain, P. Wynblatt, and W. C. Carter, “A review of wetting versus adsorption, complexions, and related phenomena: the rosetta stone of wetting,” Journal of Materials Science, vol. 48, no. 17, pp. 5681–5717, 2013. View at Google Scholar
  52. J. F. Joanny and P. G. De Gennes, “A model for contact angle hysteresis,” The Journal of Chemical Physics, vol. 81, no. 1, pp. 552–562, 1984. View at Google Scholar · View at Scopus
  53. M. Iwamatsu, “Contact angle hysteresis of cylindrical drops on chemically heterogeneous striped surfaces,” Journal of Colloid and Interface Science, vol. 297, no. 2, pp. 772–777, 2006. View at Publisher · View at Google Scholar · View at Scopus
  54. B. B. Sauer and W. G. Kampert, “Influence of viscosity on forced and spontaneous spreading: wilhelmy fiber studies including practical methods for rapid viscosity measurement,” Journal of Colloid and Interface Science, vol. 199, no. 1, pp. 28–37, 1998. View at Publisher · View at Google Scholar · View at Scopus
  55. B. He, N. A. Patankar, and J. Lee, “Multiple equilibrium droplet shapes and design criterion for rough hydrophobic surfaces,” Langmuir, vol. 19, no. 12, pp. 4999–5003, 2003. View at Publisher · View at Google Scholar · View at Scopus
  56. H. Kamusewitz, W. Possart, and D. Paul, “The relation between Young's equilibrium contact angle and the hysteresis on rough paraffin wax surfaces,” Colloids and Surfaces A, vol. 156, no. 1–3, pp. 271–279, 1999. View at Publisher · View at Google Scholar · View at Scopus
  57. J. Long, M. N. Hyder, R. Y. M. Huang, and P. Chen, “Thermodynamic modeling of contact angles on rough, heterogeneous surfaces,” Advances in Colloid and Interface Science, vol. 118, no. 1-3, pp. 173–190, 2005. View at Publisher · View at Google Scholar · View at Scopus
  58. A. Marmur, “Wetting on hydrophobic rough surfaces: to be heterogeneous or not to be?” Langmuir, vol. 19, no. 20, pp. 8343–8348, 2003. View at Publisher · View at Google Scholar · View at Scopus
  59. H. Shibata, X. Jiang, M. Valdez, and A. W. Cramb, “The contact angle between liquid iron and a single-crystal magnesium oxide substrate at 1873 K,” Metallurgical and Materials Transactions B, vol. 35, no. 1, pp. 179–180, 2004. View at Google Scholar · View at Scopus
  60. G. L. J. Bailey and H. C. Watkins, “The flow of liquid metals on solid metal surfaces and its relation to soldering, brazing and hot-dip coating,” Journal of the Institute of Metals, vol. 80, pp. 57–76, 1951. View at Google Scholar
  61. R. Shuttleworth and G. L. J. Bailey, “The spreading of a liquid over a rough solid,” Discussions of the Faraday Society, vol. 3, pp. 16–22, 1948. View at Publisher · View at Google Scholar · View at Scopus
  62. R. N. Wenzel, “Resistance of solid surfaces to wetting by water,” Industrial & Engineering Chemistry, vol. 28, pp. 988–994, 1936. View at Google Scholar
  63. S. G. Kandlikar and M. E. Steinke, “Contact angles and interface behavior during rapid evaporation of liquid on a heated surface,” International Journal of Heat and Mass Transfer, vol. 45, no. 18, pp. 3771–3780, 2002. View at Publisher · View at Google Scholar · View at Scopus
  64. J. D. Bernardin, I. Mudawar, C. B. Walsh, and E. I. Franses, “Contact angle temperature dependence for water droplets on practical aluminum surfaces,” International Journal of Heat and Mass Transfer, vol. 40, no. 5, pp. 1017–1033, 1997. View at Google Scholar · View at Scopus
  65. N. Eustathopoulos, M. G. Nicholas, and B. Drevert, Wettability at High Temperatures, Pergamon Materials Series, Elsevier Science, 1st edition, 1999.
  66. R. E. Johnson Jr. and R. H. Dettre, “Contact angle hysteresis—III. Study of an idealized heterogeneous surface,” Journal of Physical Chemistry, vol. 68, no. 7, pp. 1744–1750, 1964. View at Google Scholar · View at Scopus
  67. N. A. Patankar, “On the modeling of hydrophobic contact angles on rough surfaces,” Langmuir, vol. 19, no. 4, pp. 1249–1253, 2003. View at Publisher · View at Google Scholar · View at Scopus
  68. P. Costa, A. Passerone, and E. Ricci, “Oxygen fluxes and the measurement of the surface tension of liquid metals,” High Temperatures, vol. 20, no. 1, pp. 59–72, 1988. View at Google Scholar · View at Scopus
  69. D. R. Milner and R. L. Apps, Introduction to Welding and Brazing, Pergamon Press, London, UK, 1st edition, 1968.
  70. H. Takao, T. Tsukada, K. Yamada, M. Yamashita, and H. Hasegawa, “Development of wettability evaluation technique applying contact angle measurement during soldering,” R&D Review of Toyota CRDL, vol. 39, no. 2, pp. 41–48, 2004. View at Google Scholar
  71. G. Humpston and D. M. Jacobson, Principles of Soldering and Brazing, ASM International, Materials Park, Ohio, USA, 3rd edition, 1996.
  72. Y. O. Kabova, V. V. Kuznetsov, and O. A. Kabov, “Temperature dependent viscosity and surface tension effects on deformations of non-isothermal falling liquid film,” International Journal of Heat and Mass Transfer, vol. 55, no. 4, pp. 1271–1278, 2012. View at Publisher · View at Google Scholar · View at Scopus
  73. H. D. Samarasekera and Z. A. Munir, “An investigation of the contact angles between low melting metals and substrates of niobium and zirconium,” Journal of The Less-Common Metals, vol. 64, no. 2, pp. 255–266, 1979. View at Google Scholar · View at Scopus
  74. W. Feduska, “High-tempeerature brazing alloy-base metal wetting reactions,” Welding Journal, vol. 38, no. 3, pp. 122–131, 1959. View at Google Scholar
  75. A. Sangghaleh and M. Halali, “An investigation on the wetting of polycrystalline alumina by aluminium,” Journal of Materials Processing Technology, vol. 197, no. 1–3, pp. 156–160, 2008. View at Publisher · View at Google Scholar · View at Scopus
  76. X. H. Yang, P. Xiao, S. H. Liang, J. T. Zou, and Z. K. Fan, “Alloying effect of Ni and Cr on the wettability of copper on W substrate,” Acta Metallurgica Sinica, vol. 21, no. 5, pp. 369–379, 2008. View at Publisher · View at Google Scholar · View at Scopus
  77. E. Candan, “Effect of alloying elements to aluminium on the wettability of AL/SiC system,” Turkish Journal of Engineering and Environmental Sciences, vol. 26, no. 1, pp. 1–5, 2002. View at Google Scholar · View at Scopus
  78. D. Q. Yu, H. P. Xie, and L. Wang, “Investigation of interfacial microstructure and wetting property of newly developed Sn-Zn-Cu solders with Cu substrate,” Journal of Alloys and Compounds, vol. 385, no. 1-2, pp. 119–125, 2004. View at Publisher · View at Google Scholar · View at Scopus
  79. P. Bhagawath, K. N. Prabhu, and Satyanarayan, “Wetting behavior of reactive and non-reactive wetting of liquids on metallic substrates,” World Academy of Science, Engineering and Technology, vol. 73, pp. 978–981, 2013. View at Google Scholar
  80. O. Dezellus and N. Eustathopoulos, “Fundamental issues of reactive wetting by liquid metals,” Journal of Materials Science, vol. 45, no. 16, pp. 4256–4264, 2010. View at Publisher · View at Google Scholar · View at Scopus
  81. A. L. Biance, C. Clanet, and D. Quéré, “First steps in the spreading of a liquid droplet,” Physical Review E, vol. 69, no. 1, Article ID 016301, 2004. View at Google Scholar
  82. L. H. Tanner, “The spreading of silicone oil drops on horizontal surfaces,” Journal of Physics D, vol. 12, no. 9, pp. 1473–1484, 1979. View at Google Scholar · View at Scopus
  83. S. Rafaï, D. Sarker, V. Bergeron, J. Meunier, and D. Bonn, “Superspreading: aqueous surfactant drops spreading on hydrophobic surfaces,” Langmuir, vol. 18, no. 26, pp. 10486–10488, 2002. View at Publisher · View at Google Scholar · View at Scopus
  84. L. Chen, G. K. Auernhammer, and E. Bonaccurso, “Short time wetting dynamics on soft surfaces,” Soft Matter, vol. 7, no. 19, pp. 9084–9089, 2011. View at Publisher · View at Google Scholar · View at Scopus
  85. J. Eggers, J. R. Lister, and H. A. Stone, “Coalescence of liquid drops,” Journal of Fluid Mechanics, vol. 401, pp. 293–310, 1999. View at Google Scholar · View at Scopus
  86. L. Duchemin, J. Eggers, and C. Josserand, “Inviscid coalescence of drops,” Journal of Fluid Mechanics, no. 487, pp. 167–178, 2003. View at Publisher · View at Google Scholar · View at Scopus
  87. K. G. Winkels, J. H. Weijs, A. Eddi, and J. H. Snoeijer, “Initial spreading of low-viscosity drops on partially wetting surfaces,” Physical Review E, Article ID 055301, 2012. View at Google Scholar
  88. L. Courbin, J. C. Bird, M. Reyssat, and H. A. Stone, “Dynamics of wetting: from inertial spreading to viscous imbibition,” Journal of Physics Condensed Matter, vol. 21, no. 46, Article ID 464127, 2009. View at Publisher · View at Google Scholar · View at Scopus
  89. J. D. Paulsen, J. C. Burton, and S. R. Nagel, “Viscous to inertial crossover in liquid drop coalescence,” Physical Review Letters, vol. 106, no. 11, Article ID 114501, 2011. View at Publisher · View at Google Scholar · View at Scopus
  90. S. Case and S. Nagel, “Coalescence in low-viscosity liquids,” Physical Review Letters, vol. 100, no. 8, Article ID 084503, 2008. View at Google Scholar
  91. M. Wu, T. Cubaud, and C.-M. Ho, “Scaling law in liquid drop coalescence driven by surface tension,” Physics of Fluids, vol. 16, no. 7, pp. L51–L54, 2004. View at Publisher · View at Google Scholar · View at Scopus
  92. A. Carlson, M. Do-Quang, and G. Amberg, “Dissipation in rapid dynamic wetting,” Journal of Fluid Mechanics, vol. 682, pp. 213–240, 2011. View at Publisher · View at Google Scholar · View at Scopus
  93. C. Redon, F. Brochard-Wyart, H. Hervet, and F. Rondelez, “Spreading of “heavy” droplets—II. Experiments,” Journal of Colloid And Interface Science, vol. 149, no. 2, pp. 580–591, 1992. View at Google Scholar · View at Scopus
  94. R. Holdich, V. M. Starov, P. Prokopovich et al., “Spreading of liquid drops from a liquid source,” Colloids and Surfaces A, vol. 282-283, pp. 247–255, 2006. View at Publisher · View at Google Scholar · View at Scopus
  95. K. Landry and N. Eustathopoulos, “Dynamics of wetting in reactive metal/ceramic systems: linear spreading,” Acta Materialia, vol. 44, no. 10, pp. 3923–3932, 1996. View at Google Scholar · View at Scopus
  96. N. Eustathopoulos, “Progress in understanding and modeling reactive wetting of metals on ceramics,” Current Opinion in Solid State and Materials Science, vol. 9, no. 4-5, pp. 152–160, 2005. View at Publisher · View at Google Scholar · View at Scopus
  97. A. Mortensen, B. Drevet, and N. Eustathopoulos, “Kinetics of diffusion-limited spreading of sessile drops in reactive wetting,” Scripta Materialia, vol. 36, no. 6, pp. 645–651, 1997. View at Google Scholar · View at Scopus
  98. K. Landry, C. Rado, and N. Eustathopoulos, “Influence of interfacial reaction rates on the wetting driving force in metal/ceramic systems,” Metallurgical and Materials Transactions A, vol. 27, no. 10, pp. 3181–3186, 1996. View at Google Scholar · View at Scopus
  99. P. Protsenko, O. Kozlova, R. Voytovych, and N. Eustathopoulos, “Dissolutive wetting of Si by molten Cu,” Journal of Materials Science, vol. 43, no. 16, pp. 5669–5671, 2008. View at Publisher · View at Google Scholar · View at Scopus
  100. J. C. Ambrose, M. G. Nicholas, and A. M. Stoneham, “Dynamics of braze spreading,” Acta Metallurgica et Materialia, vol. 40, no. 10, pp. 2483–2488, 1992. View at Google Scholar · View at Scopus
  101. C. D. Bain, G. D. Burnett-Hall, and R. R. Montgomerie, “Rapid motion of liquid drops,” Nature, vol. 372, no. 6505, pp. 414–415, 1994. View at Publisher · View at Google Scholar · View at Scopus
  102. F. D. dos Santos and T. Ondarçuhu, “Free-running droplets,” Physical Review Letters, vol. 75, no. 16, pp. 2972–2975, 1995. View at Publisher · View at Google Scholar · View at Scopus
  103. M. E. R. Shanahan and P.-G. de Gennes, “Start-up of a reactive droplet,” Comptes Rendus l’Académie des Sciences, vol. 324, no. 4, pp. 261–268, 1997. View at Google Scholar
  104. C. D. Bain and G. M. Whitesides, “A study by contact angle of the acid-base behavior of monolayers containing ω-mercaptocarboxylic acids adsorbed on gold: an example of reactive spreading,” Langmuir, vol. 5, no. 6, pp. 1370–1378, 1989. View at Google Scholar · View at Scopus
  105. M. K. Chaudhury and G. M. Whitesides, “How to make water run uphill,” Science, vol. 256, no. 5063, pp. 1539–1544, 1992. View at Google Scholar · View at Scopus
  106. F. Brochard, “Motions of droplets on solid surfaces induced by chemical or thermal gradients,” Langmuir, vol. 5, no. 2, pp. 432–438, 1989. View at Google Scholar · View at Scopus
  107. P.-G. de Gennes, “Running droplets in a random medium,” Comptes Rendus de l'Academie de Sciences, vol. 327, no. 1, pp. 147–154, 1999. View at Publisher · View at Google Scholar · View at Scopus
  108. E. Raphael, “Etalement de gouttes sur une surface bigarrée,” Comptes Rendus de l'Academie de Sciences, vol. 306, 1988. View at Google Scholar
  109. F. Brochard-Wyart and P.-G. De Gennes, “Spontaneous motion of a reactive droplet,” Comptes Rendus de l'Academie de Sciences, vol. 321, no. 7, pp. 285–288, 1995. View at Google Scholar · View at Scopus