Table of Contents
Journal of Metallurgy
Volume 2014 (2014), Article ID 397279, 10 pages
http://dx.doi.org/10.1155/2014/397279
Research Article

Influence of the Rate and Degree of Deformation on the Texture, Structure and Mechanical Properties of Steel

1South Ukrainian National Pedagogical University Named after K. D. Ushynsky, 26 Staroportofrankovskaya Street, Odessa 65020, Ukraine
2Institute of Materials Science, Leibniz University of Hannover, 30823 Garbsen, Hannover, Germany

Received 28 October 2013; Revised 17 January 2014; Accepted 31 January 2014; Published 24 March 2014

Academic Editor: Michael E. Kassner

Copyright © 2014 V. V. Usov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. “Plastic Deformation of Metals and Related Properties,” http://www.newagepublishers.com/samplechapter/001425.pdf.
  2. “Types of Strain,” in Manufacturing Processes for Engineering Materials, S. Kalpakjian, S. R. Schmid, and C. -W. Kok, Eds., Pearson Education, 5th edition, 2008, http://www3.nd.edu/~manufact/MPEM_pdf_files/Ch02.pdf.
  3. A. Bhattacharyya, D. Rittel, and G. Ravichandran, “Strain rate effect on the evolution of deformation texture for α-Fe,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 37, no. 4, pp. 1137–1145, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. A. A. Bryukhanov, D. Fassman, and Z. A. Bryukhanova, “Effect of the tensile strain rate on the texture of sheets of St1.0312 steel,” The Physics of Metals and Metallography, vol. 113, no. 7, pp. 721–725, 2012. View at Google Scholar
  5. “Electron Back-Scatter Diffraction in the Scanning Electron Microscope: An Overview,” http://materialsknowledge.org/docs/GholiniaEBSDOverview.pdf.
  6. M. T. Pérez-Prado, G. González-Doncel, O. A. Ruano, and T. R. McNelley, “Texture analysis of the transition from slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy,” Acta Materialia, vol. 49, no. 12, pp. 2259–2268, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. D. Vishnyakov, A. A. Babareko, S. A. Vladimirov, and I. V. Egiz, Theory of Formation of Textures in Metals and Alloys, Nauka, Moscow, 1979, (Russian).
  8. T. Senuma, H. Yada, R. Shimizu, and J. Harase, “Textures of low carbon and titanium bearing extra low carbon steel sheets hot rolled below their AR3 temperatures,” Acta Metallurgica et Materialia, vol. 38, no. 12, pp. 2673–2681, 1990. View at Google Scholar · View at Scopus
  9. D. François, A. Pineau, and A. Zaoui, Mechanical Behavior of Materials, Volume 1: Micro- and Macroscopic Constitutive Behavior, 2012, http://books.google.com.ua/books?id=h8mtGVa9ZUUC&printsec=frontcover&hl=ru#v=onepage&q&f=false.
  10. L. E. Samuels, Light Microscopy Ob Carbon Steels, ASM International, 1999, http://books.google.ru/books?id=rsdbs92yGs4C&printsec=frontcover&hl=ru#v=onepage&q&f=false.
  11. R. W. K. Honeycombe, Plastic Deformation of Metals, St. Martin's Press, New York, NY, USA, 1968.
  12. “Structural integrity assessment procedures for European industry,” http://www.eurofitnet.org/sintap_BRITISH_STEEL_BS-25.pdf.
  13. A. C. Bannister, J. Ruiz Ocejo, and F. Gutierrez-Solana, “Implications of the yield stress/tensile stress ratio to the SINTAP failure assessment diagrams for homogeneous materials,” Engineering Fracture Mechanics, vol. 67, no. 6, pp. 547–562, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. “Grundlagen der Blechumformung,” http://www.bs-wiki.de/mediawiki/index.php?title=Umformen#Senkrechte_Anisotropie_r.