On the Designing, Efficiency, and Stirring Force of an Induction Coil for the Processing of Prototype Al Based Nanocomposites

Table 1

Preconditions used for the designing of the induction coil.

Material to melt	Aluminum
Capacity of the furnace	0.1 Kg
Crucible material	Sintered alumina
Crucible shape	Cylindrical
Wall thickness of the crucible	2 mm
Gap between coil and the crucible	5 mm
Material of coil pipe	ETP^* copper
External diameter of copper pipe	5 mm
Internal diameter of copper pipe	4 mm
Frequency of power supply	10 KHz
Current of power supply	100 A

Electrolytic tough pitch copper.