Table of Contents
Journal of Metallurgy
Volume 2015, Article ID 931535, 11 pages
http://dx.doi.org/10.1155/2015/931535
Research Article

Effect of Processing Parameters on the Mechanical Properties of Heavy Section Ductile Iron

Central Metallurgical Research and Development Institute, P.O. Box 87, Helwan, Cairo, Egypt

Received 10 September 2014; Accepted 2 January 2015

Academic Editor: Brij Kumar Dhindaw

Copyright © 2015 Mohamed Mahmoud Mourad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. J. Fallon, “Experiences in the manufacture of ductile irons,” The Foundryman, vol. 88, no. 9, pp. 308–318, 1995. View at Google Scholar · View at Scopus
  2. G. K. Bouse, J. Parolini, N. Rojek, and C. Zhou, “Quality requirements for general electric ductile iron castings exceeding 10T used for wind and gas turbine components,” in Proceedings of the 69th World Foundry Congress (WFC '10), vol. 3, Hangzhou, China, 2010.
  3. C. M. Ecob, A Review of Common Metallurgical Defects in Ductile Cast Iron, Elkem Foundry Products Division, Oslo, Norway, 2004.
  4. I. Riposan, M. Chisamera, S. Stan, and T. Skaland, “Surface Graphite Degeneration in Ductile Iron Castings for Resin Molds,” Tsinghua Science and Technology, vol. 13, no. 2, pp. 157–163, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. Rio Tinto Iron & Titanium, Ductile Iron Data for Design Engineers, Rio Tinto Iron & Titanium, Montreal, Canada, 1990.
  6. H. Roedter and M. Gagne, “Ductile iron for heavy section windmill castings,” in Proceedings of the Keith Millis Symposium on Ductile Cast Iron, pp. 176–182, 2003.
  7. H. Bakkerus and B. J. van der Holst, “Dutch develop vortex process for ductile iron treatment,” Modern Casting, vol. 71, no. 3, pp. 41–44, 1981. View at Google Scholar · View at Scopus
  8. L. Zhe, C. Weiping, and D. Yu, “Influence of cooling rate and antimony addition content on graphite morphology and mechanical properties of a ductile iron,” China Foundry, vol. 9, no. 2, pp. 114–118, 2012. View at Google Scholar · View at Scopus
  9. http://www.foundry.elkem.com/.
  10. A. Alhussein, M. Risbet, A. Bastien, J. P. Chobaut, D. Balloy, and J. Favergeon, “Influence of silicon and addition elements on the mechanical behavior of ferritic ductile cast iron,” Materials Science and Engineering A, vol. 605, pp. 222–228, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Zhenhua and L. Yanxiang, “Effect of Sb on the graphite morphology and mechanical properties in heavy section ductile iron,” Materials Science Forum, vol. 475–479, pp. 2769–2772, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Ferroa, A. Fabrizi, R. Cervob, and C. Carollo, “Effect of inoculant containing rare earth metals and bismuth on microstructure and mechanical properties of heavy-section near-eutectic ductile iron castings,” Journal of Materials Processing Technology, vol. 213, no. 9, pp. 1601–1608, 2013. View at Publisher · View at Google Scholar
  13. R. A. Gonzaga, P. Martínez Landa, A. Perez, and P. Villanueva, “Mechanical properties dependency of the pearlite content of ductile irons,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 33, no. 2, pp. 150–158, 2009. View at Google Scholar
  14. R. A. Gonzaga, “Influence of ferrite and pearlite content on mechanical properties of ductile cast irons,” Materials Science and Engineering: A, vol. 567, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  15. W. L. Bradley and M. N. Srinivasan, “Fracture and fracture toughness of cast irons,” International Materials Reviews, vol. 35, no. 1, pp. 129–161, 1990. View at Publisher · View at Google Scholar
  16. M. Shirani and G. Härkegård, “Large scale axial fatigue testing of ductile cast iron for heavy section wind turbine components,” Engineering Failure Analysis, vol. 18, no. 6, pp. 1496–1510, 2011. View at Publisher · View at Google Scholar
  17. P. Chaengkham and P. Srichandr, “Continuously cast ductile iron: processing, structures, and properties,” Journal of Materials Processing Technology, vol. 211, no. 8, pp. 1372–1378, 2011. View at Publisher · View at Google Scholar · View at Scopus