Table of Contents
Journal of Materials
Volume 2013, Article ID 150671, 6 pages
http://dx.doi.org/10.1155/2013/150671
Research Article

Porosity Analysis of Plasma Sprayed Coating by Application of Soft Computing

1Department of Metallurgical & Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302, India
2Department of Metallurgical & Materials Engineering, National Institute of Technology, Rourkela, Odisha 769008, India
3Department of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha 769008, India
4Department of Chemistry, National Institute of Technology, Rourkela, Odisha 769008, India

Received 23 January 2013; Accepted 22 March 2013

Academic Editor: Marie-Louise Saboungi

Copyright © 2013 Ajit Behera et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Friedrich-Wilhelm, A. Laarmann, and T. Wenz, Modern Surface Technology, pp. 254–259, John Wiley & Sons, New York, NY, USA, 2nd edition, 2007.
  2. D. Wixson, “Thermal sprayed-deposits shield structures from corrosion,” Indian Welding Journal, vol. 88, no. 7, pp. 67–69, 2009. View at Google Scholar
  3. H. Shahriar, Design of experiment analysis of high velocity oxy-fuel coating of hydroxyapatite [master degree Thesis], School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland, 2009.
  4. E. Pfender, in Thermal Spray: Advances in Coatings Technology, D. L. Houck, Ed., vol. 14, pp. 14–17, ASM International, Materials Park, Ohio, USA, 1987.
  5. W. X. Guo, “A method to calculate the evaporation rate of thermal cathode,” Journal of Electronics, vol. 6, p. 166, 1984. View at Google Scholar
  6. J. R. Davis, Handbook of Thermal Spray Technology, Thermal Spray Society Training Committee, ASM International, Materials Park, Ohio, USA, 2004.
  7. M. Zhang, X. Wang, J. Luo, Q. Zhao, and X. Liao, “Influence of plasma spraying on the performance of oxide cathodes,” IEEE Transactions on Electron Devices, vol. 58, no. 7, pp. 2143–2148, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. R. B. Heimann, Plasma Spray Coating: Principles and Applications, WILEY-VCH, New York, NY, USA, 2008.
  9. P. Fauchais, “Understanding plasma spraying,” Journal of Physics D, vol. 37, pp. 86–108, 2004. View at Google Scholar
  10. C. Moreau, P. Gougeon, M. Lamontagne et al., Thermal Spray Industrial Applications, ASM International, Materials Park, Ohio, USA, 1994.
  11. S. C. Mishra and A. Satapathy, “Neural network analysis for deposition of nickel-aluminide coatings on steel by plasma spraying,” in Proceedings of the 21st National Symposium of Plasma Science Society of India, MNIT, December 2006.
  12. S. S. Sablani, O. D. Baik, and M. Marcotte, “Neural networks for predicting thermal conductivity of bakery products,” Journal of Food Engineering, vol. 52, no. 3, pp. 299–304, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman, “Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering,” Surface and Coatings Technology, vol. 187, no. 1, pp. 6–16, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Friis and C. Persson, “Process window for plasma spray processes,” in Thermal Spray 2001: New Surfaces for a New Millenium, C. C. Berndt, K. A. Kohr, and E. F. Lugscheider, Eds., pp. 1313–1319, ASM International, Materials Park, Ohio, USA, 2001. View at Google Scholar
  15. S. Kundas, “Computer simulation of plasma spraying processes,” in Thermal Spray 2001: New Surfaces for a New Millenium, pp. 925–932, ASM International, Materials Park, Ohio, USA, 2001. View at Google Scholar
  16. P. Fauchais, G. Montavon, M. Vardelle, and J. Cedelle, “Developments in direct current plasma spraying,” Surface & Coatings Technology, vol. 201, no. 5, pp. 1908–1921, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Çetinel, M. Toparli, and L. Özsoyeller, “Finite element based prediction of the microstructural evolution of steels subjected to the Tempcore process,” Mechanics of Materials, vol. 32, no. 6, pp. 339–347, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. V. Rao and H. Rao, C++ Neural Networks and Fuzzy Systems, BPB, New Delhi, India, 2000.
  19. A. Verikas and M. Bacauskiene, “Using artificial neural networks for process and system modelling,” Chemometrics and Intelligent Laboratory Systems, vol. 67, no. 2, pp. 187–191, 2003. View at Google Scholar
  20. A. Behera and S .C. Mishra, “Dependence of adhesion strength of plasma spray on coating surface properties,” Journal of Materials & Metallurgical Engineering, vol. 2, no. 1, pp. 23–30, 2012. View at Google Scholar
  21. P. Duwez, “Structure and properties of alloys rapidly quenched from the liquid state,” ASM Transactions, vol. 60, pp. 607–633, 1967. View at Google Scholar