Table of Contents
Journal of Materials
Volume 2013, Article ID 517904, 8 pages
http://dx.doi.org/10.1155/2013/517904
Review Article

Bulk Metallic Glasses and Their Composites: A Brief History of Diverging Fields

Jet Propulsion Laboratory, California Institute of Technology, MS 18-105, 4800 Oak Grove Drive, Pasadena, CA 91109, USA

Received 12 November 2012; Accepted 13 December 2012

Academic Editor: Ram Gupta

Copyright © 2013 Douglas C. Hofmann. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [30 citations]

The following is the list of published articles that have cited the current article.

  • N. Ciftci, N. Ellendt, R. von Bargen, H. Henein, L. Maedler, and V. Uhlenwinkel, “Atomization and characterization of a glass forming alloy {(Fe0.6Co0.4)(0.75)B0.2Si0.05}(96)Nb-4,” Journal of Non-Crystalline Solids, vol. 394, pp. 36–42, 2014. View at Publisher · View at Google Scholar
  • X Z Gao, M H Müser, L T Kong, and J F Li, “Atomic structure and energetics of amorphous–crystalline CuZr interfaces: a molecular dynamics study,” Modelling and Simulation in Materials Science and Engineering, vol. 22, no. 6, pp. 065007, 2014. View at Publisher · View at Google Scholar
  • Joseph W. Newkirk, and F. Frank Liou, “High Performance Materials by Laser Deposition,” Materials Science Forum, vol. 783-786, pp. 2365–2369, 2014. View at Publisher · View at Google Scholar
  • Douglas C. Hofmann, Scott N. Roberts, and Henry Kozachkov, “Infrared thermal processing history of a Ti-based bulk metallic glass matrix composite manufactured via semi-solid forging,” Acta Materialia, vol. 95, pp. 192–200, 2015. View at Publisher · View at Google Scholar
  • Odila Florêncio, Paulo Wilmar Barbosa Marques, Paulo Sergio Silva, Javier Andres Muñoz Chaves, L.C. Rodriguez Aliaga, and Walter José Botta Filho, “Study on Cu48Zr43Al9 and Cu54Zr40Al6 Amorphous Matrix Alloys by Mechanical Spectroscopy,” Defect and Diffusion Forum, vol. 365, pp. 317–322, 2015. View at Publisher · View at Google Scholar
  • Lisa Kraemer, Karoline S. Kormout, Daria Setman, Yannick Champion, and Reinhard Pippan, “Production of Bulk Metallic Glasses by Severe Plastic Deformation,” Metals, vol. 5, no. 2, pp. 720–729, 2015. View at Publisher · View at Google Scholar
  • Douglas C Hofmann, and Scott N Roberts, “Microgravity metal processing: from undercooled liquids to bulk metallic glasses,” npj Microgravity, vol. 1, pp. 15003, 2015. View at Publisher · View at Google Scholar
  • Y. H. Sun, “Inverse ductile-brittle transition in metallic glasses?,” Materials Science And Technology, vol. 31, no. 6, pp. 635–650, 2015. View at Publisher · View at Google Scholar
  • Junheng Gao, Joanne Sharp, Dikai Guan, W. Mark Rainforth, and Lain Todd, “New compositional design for creating tough metallic glass composites with excellent work hardening,” Acta Materialia, vol. 86, pp. 208–215, 2015. View at Publisher · View at Google Scholar
  • Gustavo Doubek, Ryan C. Sekol, Jinyang Li, Won-Hee Ryu, Forrest S. Gittleson, Siamak Nejati, Eric Moy, Candy Reid, Marcelo Carmo, Marcelo Linardi, Punnathat Bordeenithikasem, Emily Kinser, Yanhui Liu, Xiao Tong, Chinedum O. Osuji, Jan Schroers, Sundeep Mukherjee, and André D. Taylor, “Guided Evolution of Bulk Metallic Glass Nanostructures: A Platform for Designing 3D Electrocatalytic Surfaces,” Advanced Materials, 2015. View at Publisher · View at Google Scholar
  • I. Kaban, P. Jovari, B. Escher, D. T. Tran, G. Svensson, M. A. Webb, T. Z. Regier, V. Kokotin, B. Beuneu, T. Gemming, and J. Eckert, “Atomic structure and formation of CuZrAl bulk metallic glasses and composites,” Acta Materialia, vol. 100, pp. 369–376, 2015. View at Publisher · View at Google Scholar
  • T. Koziel, “Estimation Of Cooling Rates In Suction Casting And Copper-Mould Casting Processes,” Archives Of Metallurgy And Materials, vol. 60, no. 2, pp. 767–771, 2015. View at Publisher · View at Google Scholar
  • Xiaoling Zhou, and Changqing Chen, “Strengthening and toughening mechanisms of amorphous/amorphous nanolaminates,” International Journal Of Plasticity, vol. 80, pp. 75–85, 2016. View at Publisher · View at Google Scholar
  • I. Toda-Caraballo, and P. E. J. Rivera-Diaz-del-Castillo, “A criterion for the formation of high entropy alloys based on lattice distortion,” Intermetallics, vol. 71, pp. 76–87, 2016. View at Publisher · View at Google Scholar
  • S. Thanka Rajan, M. Karthika, Avi Bendavid, and B. Subramanian, “Apatite layer growth on glassy Zr48Cu36Al8Ag8 sputtered titanium for potential biomedical applications,” Applied Surface Science, vol. 369, pp. 501–509, 2016. View at Publisher · View at Google Scholar
  • Yongwei Wang, Mo Li, and Jinwu Xu, “Toughen and harden metallic glass through designing statistical heterogeneity,” Scripta Materialia, vol. 113, pp. 10–13, 2016. View at Publisher · View at Google Scholar
  • Joseph Lik Hang Chau, Yen-Yu Hou, Alfred I-Tsung Pan, and Chih-Chao Yang, “Fabrication of High Hardness and Corrosion Resistance Coatings From Fe-Based Alloy Powders,” Particulate Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Yangyang Cheng, Shujie Pang, Chen Chen, and Tao Zhang, “Size-dependent enhancement of plasticity by laser surface melting in Zr55Al10Ni5Cu30 bulk metallic glass,” Journal Of Alloys And Compounds, vol. 658, pp. 49–54, 2016. View at Publisher · View at Google Scholar
  • Wei Zhang, Andrew J. Bodey, Tan Sui, Winfried Kockelmann, Christoph Rau, Alexander M. Korsunsky, and Jiawei Mi, “Multi-scale Characterisation of the 3D Microstructure of a Thermally-Shocked Bulk Metallic Glass Matrix Composite,” Scientific Reports, vol. 6, pp. 18545, 2016. View at Publisher · View at Google Scholar
  • Mahmoud Z. Ibrahim, Ahmed A.D. Sarhan, Farazila Yusuf, and M. Hamdi, “Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article,” Journal of Alloys and Compounds, 2017. View at Publisher · View at Google Scholar
  • Basudeb Karmakar, “Functional bulk metallic glasses,” Functional Glasses and Glass-Ceramics, pp. 365–390, 2017. View at Publisher · View at Google Scholar
  • Abdul’Azeez Abdu Aliyu, Ahmad Majdi Abdul-Rani, Turnad Lenggo Ginta, Chander Prakash, Eugen Axinte, Muhammad Alhapis Razak, and Sadaqat Ali, “A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–23, 2017. View at Publisher · View at Google Scholar
  • Inna Lyashenko, Vladimir Konovalov, Vladimir Lopatka, Leonid Poperenko, Ivan Ryzhkov, Vladimir Voitsenya, and Iryna Yurgelevych, “Modification of Optical Properties of Amorphous Metallic Mirrors Due to Impact of Deuterium Plasma,” Recent Advances in Technology Research and Education, vol. 53, pp. 113–120, 2018. View at Publisher · View at Google Scholar
  • Mahmoud Z. Ibrahim, Ahmed A. D. Sarhan, T. Y. Kuo, Farazila Yusuf, M. Hamdi, and C. S. Chien, “Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar
  • Andrew K. Stemshorn, Yogesh K. Vohra, and Spencer J. Smith, “ High pressure high temperature devitrification of Fe 78 B 13 Si 9 metallic glass with simultaneous x-ray structural characterization ,” Journal of Applied Physics, vol. 123, no. 21, pp. 215901, 2018. View at Publisher · View at Google Scholar
  • Z. Jaafari, A. Seifoddini, S. Hasani, and P. Rezaei-Shahreza, “Kinetic analysis of crystallization process in [(Fe0.9Ni0.1)77Mo5P9C7.5B1.5]100−xCux (x = 0.1 at.%) BMG,” Journal of Thermal Analysis and Calorimetry, 2018. View at Publisher · View at Google Scholar
  • Y.S. Chen, E.A. Golygin, A.A. Gavrilyuk, and J.G. Lin, “Post-treatment effects on the magnetic anisotropy of iron based metallic amorphous ribbons,” Journal of Magnetism and Magnetic Materials, 2018. View at Publisher · View at Google Scholar
  • Fabian Haag, Steffen Geisel, Güven Kurtuldu, and Jörg F. Löffler, “Bulk metallic glass casting investigated using high-speed infrared monitoring and complementary fast scanning calorimetry,” Acta Materialia, 2018. View at Publisher · View at Google Scholar
  • Si Lan, Zhenduo Wu, Xiaoya Wei, Jie Zhou, Zhaoping Lu, Jörg Neuefeind, and Xun-Li Wang, “Structure origin of a transition of classic-to-avalanche nucleation in Zr-Cu-Al bulk metallic glasses,” Acta Materialia, 2018. View at Publisher · View at Google Scholar
  • Kuo-Hao Lee, Yongjian Yang, and John C. Mauro, “Crack initiation in an indented metallic glass with embedded nanoparticle,” Journal of Applied Physics, vol. 125, no. 2, pp. 025106, 2019. View at Publisher · View at Google Scholar