Table of Contents Author Guidelines Submit a Manuscript
Journal of Materials
Volume 2014, Article ID 478549, 9 pages
http://dx.doi.org/10.1155/2014/478549
Research Article

Effect of Short Fiber Reinforcement on Mechanical Properties of Hybrid Phenolic Composites

1Department of Mechanical Engineering, SSM College of Engineering, Komarapalayam, Tamil Nadu 638183, India
2Department of Mechanical Engineering, The National Institute of Engineering, Mysore, Karnataka 570 008, India
3Department of Mechanical Engineering, Shivani College of Engineering and Technology, Trichy, Tamil Nadu 620009, India
4Department of Automobile Engineering, Sri Jagadguru Mallikarjuna Murugharajendra Institute of Technology, Chitradurga, Karnataka 577 502, India

Received 23 February 2014; Revised 31 May 2014; Accepted 4 July 2014; Published 6 August 2014

Academic Editor: Andrzej Galeski

Copyright © 2014 Sembian Manoharan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Bijwe, “Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials: a review,” Polymer Composites, vol. 18, no. 3, pp. 378–396, 1997. View at Publisher · View at Google Scholar · View at Scopus
  2. D. Chan and G. W. Stachowiak, “Review of automotive brake friction materials,” Journal of Automobile Engineering, vol. 218, no. 9, pp. 953–966, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. B. K. Satapathy and J. Bijwe, “Fade and recovery behavior of non-asbestos organic (NAO) composite friction materials based on combinations of rock fibers and organic fibers,” Journal of Reinforced Plastics and Composites, vol. 24, no. 6, pp. 563–577, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Tang and Y. Lu, “Combinatorial screening of ingredients for steel wool base semimetallic and aramid pulp based nonasbestos organic brake material,” Journal of Reinforced Plastics and Composites, vol. 23, no. 1, pp. 51–63, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Öztürk, F. Arslan, and S. Öztürk, “Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials,” Tribology International, vol. 40, no. 1, pp. 37–48, 2007. View at Google Scholar
  6. W. K. Goertzen and M. R. Kessler, “Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair,” Composites Part B: Engineering, vol. 38, no. 1, pp. 1–9, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. V. G. Geethamma, G. Kalaprasad, G. Groeninckx, and S. Thomas, “Dynamic mechanical behavior of short coir fiber reinforced natural rubber composites,” Composites A: Applied Science and Manufacturing, vol. 36, no. 11, pp. 1499–1506, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Kumaresan, G. Chandramohan, M. Senthilkumar, and B. Suresha, “Dynamic mechanical analysis and three-body wear of carbon-epoxy composite filled with SiC particles,” Journal of Reinforced Plastics and Composites, vol. 31, no. 21, pp. 1435–1448, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. M. S. Sreekala, S. Thomas, and G. Groeninckx, “Dynamic mechanical properties of oil palm fiber/phenol formaldehyde and oil palm fiber/glass hybrid phenol formaldehyde composites,” Polymer Composites, vol. 26, no. 3, pp. 388–400, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. S. K. Waage, D. J. Gardner, and T. J. Elder, “Effects of fillers and extenders on the cure properties of phenol-formaldehyde resin as determined by the application of thermal techniques,” Journal of Applied Polymer Science, vol. 42, no. 1, pp. 273–278, 1991. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Wang, S. Adanur, and B. Z. Jang, “Mechanical and thermo-mechanical failure mechanism analysis of fiber/filler reinforced phenolic matrix composites,” Composites B: Engineering, vol. 28, no. 3, pp. 215–231, 1997. View at Google Scholar · View at Scopus
  12. K. C. M. Nair, S. Thomas, and G. Groeninckx, “Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres,” Composites Science and Technology, vol. 61, no. 16, pp. 2519–2529, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. A. K. Saha, S. Das, D. Bhatta, and B. C. Mitra, “Study of jute fiber reinforced polyester composites by dynamic mechanical analysis,” Journal of Applied Polymer Science, vol. 71, no. 9, pp. 1505–1513, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Wu, M. Zeng, Q. Xu, S. Hou, H. Jin, and L. Fan, “Effects of glass-to-rubber transition of thermosetting resin matrix on the friction and wear properties of friction materials,” Tribology International, vol. 54, pp. 51–57, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. R. P. Talegaonkar and K. Gopinath, “Influence of alumina fiber content on properties of non-asbestos organic brake friction material,” Journal of Reinforced Plastics and Composites, vol. 28, no. 17, pp. 2069–2081, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Joseph, S. P. Appukuttan, J. M. Kenny, D. Puglia, S. Thomas, and K. Joseph, “Dynamic mechanical properties of oil palm microfibril-reinforced natural rubber composites,” Journal of Applied Polymer Science, vol. 117, no. 3, pp. 1298–1308, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. L. A. Pothan, S. Thomas, and G. Groeninckx, “The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites,” Composites A: Applied Science and Manufacturing, vol. 37, no. 9, pp. 1260–1269, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Jacob, B. Francis, S. Thomas, and K. T. Varughese, “Dynamical mechanical analysis of sisal/oil palm hybrid fiber-reinforced natural rubber composites,” Polymer Composites, vol. 27, no. 6, pp. 671–680, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Stark, “Investigation of the curing behaviour of carbon fibre epoxy prepreg by Dynamic Mechanical Analysis DMA,” Polymer Testing, vol. 32, no. 2, pp. 231–239, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Keusch and R. Haessler, “Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites,” Composites A: Applied Science and Manufacturing, vol. 30, no. 8, pp. 997–1002, 1999. View at Publisher · View at Google Scholar · View at Scopus
  21. H. S. Jaggi, A. Tiwari, B. K. Satapathy, and A. Patnaik, “Dynamic mechanical response and fade-recovery performance of friction composites: effect of flyash and resin combination,” Journal of Reinforced Plastics and Composites, vol. 32, no. 11, pp. 835–845, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Jawaid, H. P. S. Abdul Khalil, and O. S. Alattas, “Woven hybrid biocomposites: dynamic mechanical and thermal properties,” Composites A: Applied Science and Manufacturing, vol. 43, no. 2, pp. 288–293, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Jawaid, H. P. S. Abdul Khalil, A. Hassan, R. Dungani, and A. Hadiyane, “Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites,” Composites B: Engineering, vol. 45, no. 1, pp. 619–624, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. M. P. Sepe, Properties Measured by DMA. Dynamic Mechanical Analysis for Plastic Engineering, Plastics Design Library, New York, NY, USA, 1998.
  25. M. Akay, “Aspects of dynamic mechanical analysis in polymeric composites,” Composites Science and Technology, vol. 47, no. 4, pp. 419–423, 1993. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Hameed, P. A. Sreekumar, B. Francis, W. Yang, and S. Thomas, “Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites,” Composites A: Applied Science and Manufacturing, vol. 38, no. 12, pp. 2422–2432, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Botev, H. Betchev, D. Bikiaris, and C. Panayiotou, “Mechanical properties and visco elastic behaviour of basalt fiber-reinforced polypropylene,” Journal of Applied Polymer Science, vol. 74, no. 3, pp. 523–531, 1999. View at Publisher · View at Google Scholar
  28. M. Jacob, B. Francis, K. T. Varughese, and S. Thomas, “The effect of silane coupling agents on the viscoelastic properties of rubber biocomposites,” Macromolecular Materials and Engineering, vol. 291, no. 9, pp. 1119–1126, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. B. Harris, O. G. Braddell, D. P. Almond, C. Lefebvre, and J. Verbist, “Study of carbon fibre surface treatments by dynamic mechanical analysis,” Journal of Materials Science, vol. 28, no. 12, pp. 3353–3366, 1993. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Idicula, S. K. Malhotra, K. Joseph, and S. Thomas, “Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites,” Composites Science and Technology, vol. 65, no. 7-8, pp. 1077–1087, 2005. View at Publisher · View at Google Scholar · View at Scopus