Research Article
Influence of Cooling Rate on Microsegregation Behavior of Magnesium Alloys
Table 1
Summary of the literature data.
| Alloy | Casting condition | Min. Al wt.% | Max. Al wt.% | Scheil model | Reference | Min. Al wt.% | Max. Al wt.% |
| Mg-4Al-4Ca | DS* | 1 | >3 | 1 | 3 | | AZ31 | DS | 1 | 4-5 | 1 | >6 | [7] | AM50 | DS | <2 | 8-9 | <2 | >10 | [8, 9] | Mg-4Al | DS | <2 | 8-9 | <2 | >10 | | AM60 | HPDC** | 2.5 | 10 | — | — | [10] | AM50A | Die casting | 1.5 | 3.0 | — | — | [19] | AM60A | Die casting | 2 | 4.0 | — | — | [21] | AZ91D | PMC*** | 2.6 | 11.7 | — | — | | AZ91D | PMC | 3.3 | — | — | — | [22] | AZ91D | Die casting | 3 | — | — | — | [23] | AZ91D | Strip casting | 1 | 2.5 | — | — | | AZ80 | Die-cast billet | 2.5–3.5 | 6.6–7.9 | — | — | [24] |
|
|
DS: directional solidification; **HPCD: high-pressure die casting; ***PMC: permanent mold casting.
|