Table of Contents
Journal of Materials
Volume 2015, Article ID 502405, 7 pages
http://dx.doi.org/10.1155/2015/502405
Research Article

A Qualitative Study of Thermochemical Degradation Related with Concrete and Mortar Strength

1School of Engineering, Research and Post-Graduate Studies, Autonomous University of Chihuahua, New Campus, 31125 Chihuahua, Mexico
2Biomaterials Department, School of Dentistry, Autonomous University of Chihuahua, Campus I, 31125 Chihuahua, Mexico

Received 30 November 2014; Accepted 10 March 2015

Academic Editor: Alfonso Castiñeiras

Copyright © 2015 José Mora-Ruacho and Humberto A. Monreal-Romero. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. H. Bungey and S. G. Millard, Testing of Concrete in Structures, Chapman & Hall, Blackie Academic & Professional, Glasgow, UK, 1996.
  2. V. M. Malhotra and N. Carino, Handbook on Nondestructive Testing of Concrete, edited by: V. M. Malhotray, N. J. Carino, CRC Press, West Conshohocken, Pa, USA, 2004.
  3. American Concrete Institute (ACI), In-Place Methods to Estimate Concrete Strength, vol. 228, American Concrete Institute, Detroit, Mich, USA, 2011.
  4. A. E. Long, G. D. Henderson, and F. R. Montgomery, “Why assess the properties of near surface concrete? Near-surface testing for strength and durability of concrete,” in Proceedings of the 5th CANMET/ACI International Conference on Durability of Concrete, P. A. M. Basheer, Ed., Barcelona, Spain, 2000.
  5. ASTM (American Society for Testing and Materials), “Standard test method for rebound number of hardened concrete,” in Annual Book of ASTM Standards, ASTM C805-13, ASTM, West Conshohocken, Pa, USA, 2013. View at Google Scholar
  6. ASTM (American Society for Testing and Materials), “Standard test method for penetration resistance of hardened concrete,” Tech. Rep. ASTMC803/C803M-03-10, Annual Book of ASTM Standards, West Conshohocken, Pa, USA, 2010. View at Google Scholar
  7. American Society for Testing and Materials (ASTM), Standard Test Method for Pullout Strength of Hardened Concrete. ASTM C900-13, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pa, USA, 2013.
  8. ASTM (American Society for Testing and Materials), “Standard test method for the break-off number of concrete,” Tech. Rep. ASTM C1150-96, Annual Book of ASTM Standards, West Conshohocken, Pa, USA, 1996. View at Google Scholar
  9. ASTM (American Society for Testing and Materials), “Standard test method for obtaining and testing drilled cores and sawed beams of concrete,” in Annual Book of ASTM Standards, ASTM C42/C42M-13, ASTM, West Conshohocken, Pa, USA, 2013. View at Google Scholar
  10. American Society for Testing and Materials (ASTM), Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method). ASTM C289-07, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pa, USA, 2007.
  11. ASTM, “Standard test method for acid soluble chloride in mortar and concrete,” in Annual Book of ASTM Standards, ASTM C1152-04, American Society for Testing and Materials, West Conshohocken, Pa, USA, 2004. View at Google Scholar
  12. ASTM (American Society for Testing and Materials), “Standard test method for expansion and hydraulic cement mortar bars stored in water,” in Annual Book of ASTM Standards, ASTM C1038-10, ASTM, West Conshohocken, Pa, USA, 2010. View at Google Scholar
  13. British Standards Institution, “Part 124, methods of testing concrete: analysis of hardened concrete,” BS 1881, British Standards Institution, Londres, UK, 1988. View at Google Scholar
  14. ASTM (American Society for Testing and Materials), “Standard test method for cement content of hardened portland cement concrete,” Tech. Rep. ASTM C85-88, Annual Book of ASTM Standards, West Conshohocken, Pa, USA, 1988. View at Google Scholar
  15. S. Mindess, J. F. Young, and D. Darwin, Concrete, Prentice-Hall, Pearson Education, Upper Saddle River, NJ, USA, 2nd edition, 2002.
  16. C. Chambers and A. K. Hollyday, Modern Inorganic Chemistry: An Intermediate Text, Butterworths, London, UK, 1975.
  17. A. G. Whittaker, A. R. Mount, and M. R. Heal, Physical Chemistry, Instant Notes Series, BIOS Scientific Publishers, Oxford, UK, 2000.
  18. P. C. Hewlett, Ed., LEA's Chemistry of Cement and Concrete, Elsevier, New York, NY, USA, 4th edition, 2005.
  19. R. D. Levine, “Book review: encyclopedia of chemical physics and physical chemistry. Edited by John H. Moore and Nicholas D. Spencer,” ChemPhysChem, vol. 3, no. 9, pp. 821–822, 2002. View at Publisher · View at Google Scholar
  20. ASTM (American Society for Testing and Materials), “Standard specification for concrete aggregates,” in Annual Book of ASTM Standards, ASTM C33/C33M-13, ASTM, West Conshohocken, Pa, USA, 2013. View at Google Scholar
  21. ASTM (American Society for Testing and Materials), “Standard practice for making and curing concrete test specimens in the laboratory,” in Annual Book of ASTM Standards, vol. 04.02, ASTM C192/C192M-12, ASTM, West Conshohocken, Pa, USA, 2012. View at Google Scholar
  22. ASTM, “Standard test Method for compressive strength of cylindrical concrete specimens,” in Annual Book of ASTM Standards, ASTM C39/C39M-12, American Society for Testing and Materials, West Conshohocken, Pa, USA, 2012. View at Google Scholar
  23. Y. A. Cengel and M. A. y Boles, Termodinámica, McGraw-Hill, Santa Fé, México, 6th edition, 2008.