Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si<sub>3</sub>N<sub>4</sub>, TiAlN, and TiN Coated Inserts

<div>SEM images of (a) TiN, (b) TiAlN, and (c) nc-AlTiN/Si<sub>3</sub>N<sub>4</sub> coatings.</div>

Journal of Materials

fig1

Figure 1

Figure 1: Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si<sub>3</sub>N<sub>4</sub>, TiAlN, and TiN Coated Inserts 

Journal of Materials

Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si3N4, TiAlN, and TiN Coated Inserts

Figure 1

Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si₃N₄, TiAlN, and TiN Coated Inserts