Table of Contents
Journal of Materials
Volume 2016, Article ID 7871206, 7 pages
http://dx.doi.org/10.1155/2016/7871206
Research Article

State-of-the-Art Report on Alkali Silica Reactivity Mitigation Effectiveness Using Different Types of Fly Ashes

Glenn Department of Civil Engineering, Clemson University, S. Palmetto Blvd., Clemson, SC 29634, USA

Received 30 April 2016; Accepted 30 August 2016

Academic Editor: Yew Wei Leong

Copyright © 2016 Enamur R. Latifee. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ASTM C150/C150M-15, Standard Specification for Portland Cement, ASTM International, West Conshohocken, Pa, USA, 2016.
  2. T. E. Stanton, “Expansion of concrete through reaction between cement and aggregate,” Proceeding American Society of Civil Engineering, vol. 66, no. 10, pp. 1781–1811, 1940. View at Google Scholar
  3. E. R. Latifee and P. R. Rangaraju, “Miniature concrete prism test: rapid test method for evaluating alkali-silica reactivity of aggregates,” Journal of Materials in Civil Engineering, vol. 27, no. 7, Article ID 04014215, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. S. M. H. Shafaatian, A. Akhavan, H. Maraghechi, and F. Rajabipour, “How does fly ash mitigate alkali-silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)?” Cement and Concrete Composites, vol. 37, no. 1, pp. 143–153, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Uygunoğlu, I. B. Topcu, O. Gencel, and W. Brostow, “The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs),” Construction and Building Materials, vol. 30, pp. 180–187, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. M. D. A. Thomas, “Field studies of fly ash concrete structures containing reactive aggregates,” Magazine of Concrete Research, vol. 48, no. 177, pp. 265–279, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Beglarigale and H. Yazici, “Mitigation of detrimental effects of alkali-silica reaction in cement-based composites by combination of steel microfibers and ground-granulated blast-furnace slag,” Journal of Materials in Civil Engineering, vol. 26, no. 12, Article ID 04014091, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Pettersson, “Effects of silica fume on alkali-silica expansion in mortar specimens,” Cement and Concrete Research, vol. 22, no. 1, pp. 15–22, 1992. View at Publisher · View at Google Scholar · View at Scopus
  9. T. C. Esteves, R. Rajamma, D. Soares, A. S. Silva, V. M. Ferreira, and J. A. Labrincha, “Use of biomass fly ash for mitigation of alkali-silica reaction of cement mortars,” Construction and Building Materials, vol. 26, no. 1, pp. 687–693, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. K. J. Folliard, R. Barborak, T. Drimalas et al., “Preventing ASR/DEF in new concrete,” Final Report FHWA/TX-06/0-4085-5, Center for Transportation Research at the University of Texas at Austin, 2006. View at Google Scholar
  11. P. P. Hudec and N. K. Banahene, “Chemical treatments and additives for controlling alkali reactivity,” Cement and Concrete Composites, vol. 15, no. 1-2, pp. 21–26, 1993. View at Publisher · View at Google Scholar · View at Scopus
  12. L. J. Malvar and L. R. Lenke, “Efficiency of fly ash in mitigating alkali-silica reaction based on chemical composition,” ACI Materials Journal, vol. 103, no. 5, pp. 319–326, 2006. View at Google Scholar · View at Scopus
  13. L. J. Malvar, G. D. Cline, D. F. Burke, R. Rollings, T. W. Sherman, and J. Greene, “Alkali silica reaction mitigation: state-of-the-art and recommendations,” ACI Materials Journal, vol. 99, no. 5, pp. 480–489, 2002. View at Google Scholar
  14. R. D. Moser, A. R. Jayapalan, V. Y. Garas, and K. E. Kurtis, “Assessment of binary and ternary blends of metakaolin and Class C fly ash for alkali-silica reaction mitigation in concrete,” Cement and Concrete Research, vol. 40, no. 12, pp. 1664–1672, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Thomas, “The effect of supplementary cementing materials on alkali-silica reaction: a review,” Cement and Concrete Research, vol. 41, no. 12, pp. 1224–1231, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. M. D. A. Thomas, M. H. Shehata, and S. G. Shashiprakash, “The use of fly ash in concrete: classification by composition,” Cement, Concrete, and Aggregates, vol. 21, no. 2, pp. 105–110, 1999. View at Google Scholar
  17. E. W. Touma, D. W. Fowler, and R. L. Carrasquillo, “Alkali-silica reaction in Portland cement concrete: testing methods alternatives,” Research Report ICAR 301, International Center for Aggregates Research (ICAR), 2001. View at Google Scholar
  18. ASTM, “Standard test method for potential alkali reactivity of aggregates (Mortar-Bar method),” ASTM C1260, ASTM, West Conshohocken, Pa, USA, 2007. View at Google Scholar
  19. Canadian Standards Association, Test Method for Detection of Alkali-silica Reactive Aggregate by Accelerated Expansion of Mortar Bars, A23.2-25A, Canadian Standards Association, Toronto, Canada, 1994.
  20. RILEM Recommended Test Method AAR-2, “Detection of potential alkali-reactivity of aggregates—the ultra-accelerated mortar-bar test,” Materials and Structures, vol. 33, no. 5, pp. 283–289, 2000. View at Google Scholar
  21. Canadian Standards Association, Potential Expansivity of Aggregates; Procedure for Length Change Due to Alkali-Aggregate Reaction in Concrete Prisms, A23.2-14A, Canadian Standards Association, Toronto, Canada, 1994.
  22. G. Davies and R. E. Oberholster, “An accelerated method for testing the potential alkali reactivity of siliceous aggregates,” Cement and Concrete Research, vol. 16, no. 2, pp. 181–189, 1986. View at Publisher · View at Google Scholar
  23. ASTM, “Standard test method for concrete aggregates by determination of length change of concrete due to alkali-silica reaction,” ASTM C1293, ASTM, West Conshohocken, Pa, USA, 2007. View at Google Scholar
  24. RILEM Recommended Test Method AAR-3, “Detection of potential alkali-reactivity of aggregates—method for aggregate combinations using concrete prisms,” Materials and Structures, vol. 33, no. 229, pp. 290–293, 2000. View at Google Scholar
  25. D. Stark, S. Diamond, and M. Moranville-Regourd, Alkali-Silica Reactivity: An Overview of Research, SHRP-C-342, Strategic Highway Research Program, Washington, DC, USA, 1993.