Table of Contents
Journal of Medical Engineering
Volume 2016 (2016), Article ID 5470798, 8 pages
http://dx.doi.org/10.1155/2016/5470798
Research Article

Comparison of the Lag Screw Placements for the Treatment of Stable and Unstable Intertrochanteric Femoral Fractures regarding Trabecular Bone Failure

1Department of Biomedical Engineering, Kocaeli University, Umuttepe Campus, 41380 Kocaeli, Turkey
2Department of Biomedical Engineering, Duzce University, Konuralp Campus, 81620 Düzce, Turkey

Received 15 June 2016; Revised 3 October 2016; Accepted 16 October 2016

Academic Editor: Radovan Zdero

Copyright © 2016 Talip Celik et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. B. Schipper, R. K. Marti, and C. Van Der Werken, “Unstable trochanteric femoral fractures: extramedullary or intramedullary fixation: review of literature,” Injury, vol. 35, no. 2, pp. 142–151, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. C. T. Born, B. Karich, C. Bauer, G. von Oldenburg, and P. Augat, “Hip screw migration testing: first results for hip screws and helical blades utilizing a new oscillating test method,” Journal of Orthopaedic Research, vol. 29, no. 5, pp. 760–766, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. M. J. Parker and H. H. Handoll, “Gamma and other cephalocondylic intramedullary nails versus extramedullary implants for extracapsular hip fractures in adults,” Cochrane Database of Systematic Reviews, vol. 8, no. 9, Article ID CD000093, 2010. View at Google Scholar · View at Scopus
  4. T. R. C. Davis, J. L. Sher, A. Horsman, M. Simpson, B. B. Porter, and R. G. Checketts, “Intertrochanteric femoral fractures. Mechanical failure after internal fixation,” Journal of Bone and Joint Surgery—Series B, vol. 72, no. 1, pp. 26–31, 1990. View at Google Scholar · View at Scopus
  5. M. Güven, U. Yavuz, B. Kadioğlu et al., “Importance of screw position in intertrochanteric femoral fractures treated by dynamic hip screw,” Orthopaedics & Traumatology, Surgery & Research, vol. 96, no. 1, pp. 21–27, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. J. M. Goffin, P. Pankaj, and A. H. Simpson, “The importance of lag screw position for the stabilization of trochanteric fractures with a sliding hip screw: a subject-specific finite element study,” Journal of Orthopaedic Research, vol. 31, no. 4, pp. 596–600, 2012. View at Google Scholar
  7. E. Sim, H.-B. Schmiedmayer, and P. Lugner, “Mechanical factors responsible for the obstruction of the gliding mechanism of a dynamic hip screw for stabilizing pertrochanteric femoral fractures,” Journal of Trauma—Injury, Infection and Critical Care, vol. 49, no. 6, pp. 995–1001, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Khan, Z. Askar, I. Ahmed et al., “Intertrochanteric fracture of femur; Outcome of dynamic hip screw in elderly patients,” The Professional Medical Journal, vol. 17, no. 2, pp. 328–333, 2010. View at Google Scholar
  9. M. R. Baumgaertner, S. L. Curtin, D. M. Lindskog, and J. M. Keggi, “The value of the tip-apex distance in predicting failure of fixation of peritrochanteric fractures of the hip,” The Journal of Bone & Joint Surgery—American Volume, vol. 77, no. 7, pp. 1058–1064, 1995. View at Publisher · View at Google Scholar · View at Scopus
  10. K.-K. Hsueh, C.-K. Fang, C.-M. Chen, Y.-P. Su, H.-F. Wu, and F.-Y. Chiu, “Risk factors in cutout of sliding hip screw in intertrochanteric fractures: an evaluation of 937 patients,” International Orthopaedics, vol. 34, no. 8, pp. 1273–1276, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Pervez, M. J. Parker, and S. Vowler, “Prediction of fixation failure after sliding hip screw fixation,” Injury, vol. 35, no. 10, pp. 994–998, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. C. H. Srinivas, Implant cutout in Intertrochanteric fractures Study to establish the threshold level of Osteoporosis and implant position for implant cutout [Ph.D. thesis], Rajiv Gandhi University of Health Sciences, Bengaluru, India, 2006.
  13. M. E. Muller, P. Koch, S. Nazarin, and J. Schatzker, The Comprehensive Classification of Fractures of Long Bones, Springer, Berlin, Germany, 1990.
  14. S. Eberle, C. Gerber, G. Von Oldenburg, F. Högel, and P. Augat, “A biomechanical evaluation of orthopaedic implants for hip fractures by finite element analysis and in-vitro tests,” Proceedings of the Institution of Mechanical Engineers, Part H, vol. 224, no. 10, pp. 1141–1152, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. D. V. Embden, M. S. Gaston, L. A. Bailey, A. Hamish, and R. W. Simpson, “Trochanteric femoral fracture classification: relevance of the fracture line angle, a radiological study,” International Journal of Orthopaedics, vol. 2, pp. 250–255, 2015. View at Google Scholar
  16. J.-T. Hsu, C.-H. Chang, H.-L. Huang et al., “The number of screws, bone quality, and friction coefficient affect acetabular cup stability,” Medical Engineering and Physics, vol. 29, no. 10, pp. 1089–1095, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Sowmianarayanan, A. Chandrasekaran, and R. K. Kumar, “Finite element analysis of a subtrochanteric fractured femur with dynamic hip screw, dynamic condylar screw, and proximal femur nail implants—a comparative study,” Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 222, no. 1, pp. 117–127, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. D. C. Wirtz, N. Schiffers, T. Pandorf, K. Radermacher, D. Weichert, and R. Forst, “Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur,” Journal of Biomechanics, vol. 33, no. 10, pp. 1325–1330, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Bergmann, G. Deuretzbacher, M. Heller et al., “Hip contact and gait patterns from routine activities,” Clinical Orthopaedics and Related Research, vol. 335, pp. 190–201, 2001. View at Google Scholar
  20. G. N. Duda, E. Schneider, and E. Y. S. Chao, “Internal forces and moments in the femur during walking,” Journal of Biomechanics, vol. 30, no. 9, pp. 933–941, 1997. View at Publisher · View at Google Scholar · View at Scopus
  21. E. Schileo, F. Taddei, A. Malandrino, L. Cristofolini, and M. Viceconti, “Subject-specific finite element models can accurately predict strain levels in long bones,” Journal of Biomechanics, vol. 40, no. 13, pp. 2982–2989, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. D. L. Kopperdahl and T. M. Keaveny, “Yield strain behavior of trabecular bone,” Journal of Biomechanics, vol. 31, no. 7, pp. 601–608, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. H. H. Bayraktar, A. Gupta, R. Y. Kwon, P. Papadopoulos, and T. M. Keaveny, “The modified super-ellipsoid yield criterion for human trabecular bone,” Journal of Biomechanical Engineering, vol. 126, no. 6, pp. 677–684, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. W.-P. Chen, C.-L. Tai, C.-H. Shih, P.-H. Hsieh, M.-C. Leou, and M. S. Lee, “Selection of fixation devices in proximal femur rotational osteotomy: clinical complications and finite element analysis,” Clinical Biomechanics, vol. 19, no. 3, pp. 255–262, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. L. Konstantinidis, C. Papaioannou, A. Hirschmüller et al., “Effects of muscle-equivalent forces on the biomechanical behavior of proximal femur fracture models: A Pilot Study on Artificial Bones,” Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 226, no. 9, pp. 681–685, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Stolk, N. Verdonschot, and R. Huiskes, “Hip-joint and abductor-muscle forces adequately represent in vivo loading of a cemented total hip reconstruction,” Journal of Biomechanics, vol. 34, no. 7, pp. 917–926, 2001. View at Publisher · View at Google Scholar · View at Scopus
  27. G. N. Duda, M. Heller, J. Albinger, O. Schulz, E. Schneider, and L. Claes, “Influence of muscle forces on femoral strain distribution,” Journal of Biomechanics, vol. 31, no. 9, pp. 841–846, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. M. J. Parker, “Cutting-out of the dynamic hip screw related to its position,” The Journal of Bone & Joint Surgery—British Volume, vol. 74, no. 4, p. 625, 1992. View at Google Scholar · View at Scopus
  29. E. Perilli, M. Baleani, C. Öhman, R. Fognani, F. Baruffaldi, and M. Viceconti, “Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur,” Journal of Biomechanics, vol. 41, no. 2, pp. 438–446, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. P. J. Jenkins, R. Ramaesh, P. Pankaj et al., “A micro-architectural evaluation of osteoporotic human femoral heads to guide implant placement in proximal femoral fractures,” Acta Orthopaedica, vol. 84, no. 5, pp. 453–459, 2013. View at Publisher · View at Google Scholar · View at Scopus