Table of Contents
Journal of Mining
Volume 2014, Article ID 593401, 9 pages
http://dx.doi.org/10.1155/2014/593401
Research Article

Alteration in Material Properties of an Intact Rock due to Drilling and Bolting Operations

Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India

Received 13 February 2014; Accepted 21 April 2014; Published 19 May 2014

Academic Editor: Manoj Khandelwal

Copyright © 2014 Lok Priya Srivastava and Mahendra Singh. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Ramamurthy and V. K. Arora, “Strength predictions for jointed rocks in confined and unconfined states,” International Journal of Rock Mechanics and Mining Sciences and, vol. 31, no. 1, pp. 9–22, 1994. View at Google Scholar · View at Scopus
  2. P. H. S. W. Kulatilake, J. Um, B. B. Panda, and N. Nghiem, “Development of new peak shear-strength criterion for anisotropic rock joints,” Journal of Engineering Mechanics, vol. 125, no. 9, pp. 1010–1017, 1999. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Singh, K. S. Rao, and T. Ramamurthy, “Strength and deformational behaviour of a jointed rock mass,” Rock Mechanics & Rock Engineering, vol. 35, no. 1, pp. 45–64, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Singh and K. S. Rao, “Empirical methods to estimate the strength of jointed rock masses,” Engineering Geology, vol. 77, no. 1-2, pp. 127–137, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. J. P. Aglawe, Unstable and violent failure around underground openings in highly stressed ground [Ph.D. thesis], Queen’s University, Kingston, Canada, 1999.
  6. J. Autio, H. Malmlund, M. Kemppainen, E. Oila, and M. Siitari-Kauppi, “Study of rock damage caused by drill and blast excavation at Aspo Hard Rock laboratory,” Working Report 2004-33, University of Helsinki, 2004. View at Google Scholar
  7. S.-H. Chang, C.-I. Lee, and Y.-K. Lee, “An experimental damage model and its application to the evaluation of the excavation damage zone,” Rock Mechanics & Rock Engineering, vol. 40, no. 3, pp. 245–285, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Fuenkajorn and J. K. Daemen, “Experimental assessment of borehole drilling damage in basaltic rocks,” in Proceedings of the 25th U.S. Symposium on Rock Mechanics (USRMS '84), Evanston, Ill,USA, June 1984.
  9. S. P. Mathis and J. J. K. Daemen, Rock Damage Induced by Drilling: An Experimental Assessment of Potential Leakage around Borehole Seals, Department of mining and Geological engineering, University of Arizona, 1984.
  10. M. M. Sharma and R. W. Wunderlich, “The alteration of rock properties due to interactions with drilling-fluid components,” Journal of Petroleum Science and Engineering, vol. 1, no. 2, pp. 127–143, 1987. View at Google Scholar · View at Scopus
  11. E. Hoek, C. Torres, and B. Corkum, “Hoek-Brown criterion—2002 edition,” in Proceedings of the NARMS-TAC Conference, vol. 1, pp. 267–273, Toronto, Canada, 2002.
  12. E. Hoek and M. S. Diederichs, “Empirical estimation of rock mass modulus,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 2, pp. 203–215, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. E. Hoek, “Practical Rock Engineering,” 2007, http://www.rocscience.com.
  14. E. Hoek and D. Moy, “Design of large powerhouse caverns in weak rock,” in Compressive Rock Engineering, vol. 5, pp. 85–110, Pergamon Press, Oxford, UK, 1993. View at Google Scholar