Table of Contents
Journal of Nanoparticles
Volume 2015 (2015), Article ID 601941, 9 pages
http://dx.doi.org/10.1155/2015/601941
Research Article

Structured Pd/γ-Al2O3 Prepared by Washcoated Deposition on a Ceramic Honeycomb for Compressed Natural Gas Applications

Institut Jean le Rond d’Alembert, Université Pierre et Marie, Curie (UPMC Paris 6), CNRS UMR 7190, 2 Place de la Gare de Ceinture, 78210 Saint Cyr l’Ecole, France

Received 27 July 2014; Accepted 30 September 2014

Academic Editor: Amir Kajbafvala

Copyright © 2015 Małgorzata Adamowska and Patrick Da Costa. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Bielaczyc, J. Woodburn, and A. Szczotka, “An assessment of regulated emissions and CO2 emissions from a European light-duty CNG-fueled vehicle in the context of Euro 6 emissions regulations,” Applied Energy, vol. 117, pp. 134–141, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. G. A. Rhys-Tyler, W. Legassick, and M. C. Bell, “The significance of vehicle emissions standards for levels of exhaust pollution from light vehicles in an urban area,” Atmospheric Environment, vol. 45, no. 19, pp. 3286–3293, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. A. M. Venezia, G. di Carlo, G. Pantaleo, L. F. Liotta, G. Melaet, and N. Kruse, “Oxidation of CH4 over Pd supported on TiO2-doped SiO2: effect of Ti(IV) loading and influence of SO2,” Applied Catalysis B: Environmental, vol. 88, no. 3-4, pp. 430–437, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Salaün, A. Kouakou, S. da Costa, and P. da Costa, “Synthetic gas bench study of a natural gas vehicle commercial catalyst in monolithic form: on the effect of gas composition,” Applied Catalysis B: Environmental, vol. 88, no. 3-4, pp. 386–397, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. J. K. Hochmuth, K. Wassermann, and R. J. Farrauto, “Car exhaust cleaning,” in Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, vol. 7 of Comprehensive Inorganic Chemistry, pp. 505–523, 2013. View at Google Scholar
  6. K. A. Subramanian, V. C. Mathad, V. K. Vijay, and P. M. V. Subbarao, “Comparative evaluation of emission and fuel economy of an automotive spark ignition vehicle fuelled with methane enriched biogas and CNG using chassis dynamometer,” Applied Energy, vol. 105, pp. 17–29, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Karavalakis, M. Hajbabaei, T. D. Durbin, K. C. Johnson, Z. Zheng, and W. J. Miller, “The effect of natural gas composition on the regulated emissions, gaseous toxic pollutants, and ultrafine particle number emissions from a refuse hauler vehicle,” Energy, vol. 50, no. 1, pp. 280–291, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Shelef and H. S. Gandhi, “Ammonia formation in catalytic reduction of nitric oxide by molecular hydrogen: II. Noble metal catalysts,” Industrial & Engineering Chemistry Product Research and Development, vol. 11, no. 4, pp. 393–396, 1972. View at Publisher · View at Google Scholar · View at Scopus
  9. Y.-F. Y. Yao, “The oxidation of CO and hydrocarbons over noble metal catalysts,” Journal of Catalysis, vol. 87, no. 1, pp. 152–162, 1984. View at Publisher · View at Google Scholar · View at Scopus
  10. P. da Costa, M. Salaün, G. Djéga-Mariadassou, S. da Costa, and G. Brecq, “Comparative study of natural gas vehicles commercial catalysts in monolithic form,” SAE Technical Paper 2007-01-0039, 2007. View at Publisher · View at Google Scholar
  11. M. Salaün, S. Capela, S. Da Costa, L. Gagnepain, and P. Da Costa, “Enhancement of 3-way CNG catalyst performance at high temperature due to the presence of water in the feed: on the role of steam reforming of methane and on the influence of ageing,” Topics in Catalysis, vol. 52, no. 13–20, pp. 1972–1976, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Adamowska, V. Lauga, and P. da Costa, “Elaboration of an accelerated oven CNG heavy duty vehicles catalyst ageing for road ageing simulation,” Topics in Catalysis, vol. 56, no. 1–8, pp. 267–272, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. J. L. Williams, “Monolith structures, materials, properties and uses,” Catalysis Today, vol. 69, no. 1–4, pp. 3–9, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. R. M. Heck, S. Gulati, and R. J. Farrauto, “The application of monoliths for gas phase catalytic reactions,” Chemical Engineering Journal, vol. 82, no. 1–3, pp. 149–156, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Pedro, M. Montes, and E. E. Miró, “Monolithic reactors for environmental applications: a review on preparation technologies,” Chemical Engineering Journal, vol. 109, no. 1, pp. 11–36, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Valáškováa, J. Zdrálkováa, J. Tokarskýa, G. Simha Martynkováa, M. Ritzc, and S. Študentová, “Structural characteristics of cordierite/steatite ceramics sintered from mixtures containing pore-forming organovermiculite,” Ceramics International, vol. 40, pp. 15717–15725, 2014. View at Google Scholar
  17. T. Zhou, L. Li, J. Cheng, and Z. Hao, “Preparation of binary washcoat deposited on cordierite substrate for catalytic applications,” Ceramics International, vol. 36, no. 2, pp. 529–534, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. W. P. Addiego, I. M. Lachman, M. D. Patil, J. L. Williams, and K. E. Zaun, “High surface area washcoated substrate and method for producing same,” US Patent 5,212,130, 1993.
  19. T. A. Nijhuis, A. E. W. Beers, T. Vergunst, I. Hoek, F. Kapteijn, and J. A. Moulijn, “Preparation of monolithic catalysts,” Catalysis Reviews: Science and Engineering, vol. 43, no. 4, pp. 345–380, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Kašpar, P. Fornasiero, and N. Hickey, “Automotive catalytic converters: current status and some perspectives,” Catalysis Today, vol. 77, no. 4, pp. 419–449, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Alphonse and B. Faure, “Thermal stabilization of alumina modified by lanthanum,” Microporous and Mesoporous Materials, vol. 196, pp. 191–198, 2014. View at Google Scholar
  22. H. Firouzghalb and C. Falamaki, “Fabrication of asymmetric alumina membranes: I. Effect of SrO addition on thermal stabilization of transition aluminas,” Materials Science and Engineering B, vol. 166, no. 2, pp. 163–169, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. C. Agrafiotis and A. Tsetsekou, “The effect of powder characteristics on washcoat quality. Part I: alumina washcoats,” Journal of the European Ceramic Society, vol. 20, no. 7, pp. 815–824, 2000. View at Publisher · View at Google Scholar · View at Scopus
  24. C. Agrafiotis and A. Tsetsekou, “The effect of processing parameters on the properties of γ-alumina washcoats deposited on ceramic honeycombs,” Journal of Materials Science, vol. 35, no. 4, pp. 951–960, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Jiang, G. Lu, Y. Guo, S. Zhang, and X. Wang, “Preparation and properties of a γ-Al2O3 washcoat deposited on a ceramic honeycomb,” Surface and Coatings Technology, vol. 190, no. 2-3, pp. 314–320, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Campanati, G. Fornasari, and A. Vaccari, “Fundamentals in the preparation of heterogeneous catalysts,” Catalysis Today, vol. 77, no. 4, pp. 299–314, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Adamowska, O. Haddad, D. Leguillon, and P. Da Costa, “On the comprehension of mechanical, thermal and chemical evolution of exhaust gases aftertreatment catalysts,” Materials Science Forum, vol. 783-786, pp. 1979–1985, 2014. View at Google Scholar
  28. C. Cristiani, M. Valentini, M. Merazzi, S. Neglia, and P. Forzatti, “Effect of ageing time on chemical and rheological evolution in γ-Al2O3 slurries for dip-coating,” Catalysis Today, vol. 105, no. 3-4, pp. 492–498, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. JCPDS patterns of PdO (00-041-1107,00-043-1024 ).
  30. S. J. Wilson, “The dehydration of boehmite, γ-AlOOH, to γ-Al2O3,” Journal of Solid State Chemistry, vol. 30, no. 2, pp. 247–255, 1979. View at Publisher · View at Google Scholar · View at Scopus
  31. X. Krokidis, P. Raybaud, A.-E. Gobichon, B. Rebours, P. Euzen, and H. Toulhoat, “Theoretical study of the dehydration process of boehmite to γ-alumina,” The Journal of Physical Chemistry B, vol. 105, no. 22, pp. 5121–5130, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. P. de Souza Santos, A. C. V. Coelho, H. de Souza Santos, and P. K. Kiyohara, “Hydrothermal synthesis of well-crystallised boehmite crystals of various shapes,” Materials Research, vol. 12, no. 4, pp. 437–445, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Kalantar Neyestanaki, F. Klingstedt, T. Salmi, and D. Y. Murzin, “Deactivation of postcombustion catalysts, a review,” Fuel, vol. 83, no. 4-5, pp. 395–408, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Forzatti, D. Ballardini, and L. Sighicelli, “Preparation and characterization of extruded monolithic ceramic catalysts,” Catalysis Today, vol. 41, no. 1–3, pp. 87–94, 1998. View at Publisher · View at Google Scholar · View at Scopus
  35. T. Defraeye, “Advanced computational modelling for drying process—a review,” Applied Energy, vol. 131, pp. 323–344, 2014. View at Google Scholar
  36. S. J. Kowalski, K. Rajewska, and A. Rybicki, “Destruction of wet materials by drying,” Chemical Engineering Science, vol. 55, no. 23, pp. 5755–5762, 2000. View at Publisher · View at Google Scholar · View at Scopus
  37. S. J. Kowalski and C. Strumłło, “Moisture transport, thermodynamics, and boundary conditions in porous materials in presence of mechanical stresses,” Chemical Engineering Science, vol. 52, no. 7, pp. 1141–1150, 1997. View at Publisher · View at Google Scholar · View at Scopus