Table of Contents
Journal of Nanoscience
Volume 2014 (2014), Article ID 481023, 8 pages
http://dx.doi.org/10.1155/2014/481023
Research Article

Degradation of Tannic Acid Using TiO2 Nanotubes as Electrocatalyst

National Metallurgical Laboratory, Madras Centre, CSIR Madras Complex, Taramani, Chennai 600113, India

Received 12 August 2013; Revised 1 November 2013; Accepted 1 December 2013; Published 5 January 2014

Academic Editor: Patrick S. M. Dunlop

Copyright © 2014 N. Lakshmi Kruthika et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. P. Albu, A. Ghicov, J. M. Macak, R. Hahn, and P. Schmuki, “Self-organized, free-standing TiO2 nanotube membrane for flow-through photocatalytic applications,” Nano Letters, vol. 7, no. 5, pp. 1286–1289, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Shankar, G. K. Mor, H. E. Prakasam et al., “Highly-ordered TiO2 nanotube arrays up to 220 μm in length: use in water photoelectrolysis and dye-sensitized solar cells,” Nanotechnology, vol. 18, no. 6, Article ID 065707, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. G. K. Mor, M. A. Carvalho, O. K. Varghese, M. V. Pishko, and C. A. Grimes, “A room-temperature TiO2-nanotube hydrogen sensor able to self-clean photoactively from environmental contamination,” Journal of Materials Research, vol. 19, no. 2, pp. 628–634, 2004. View at Google Scholar · View at Scopus
  4. M. Paulose, K. Shankar, O. K. Varghese, G. K. Mor, B. Hardin, and C. A. Grimes, “Backside illuminated dye-sensitized solar cells based on titania nanotube array electrodes,” Nanotechnology, vol. 17, no. 5, pp. 1446–1448, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Gong, C. A. Grimes, O. K. Varghese et al., “Titanium oxide nanotube arrays prepared by anodic oxidation,” Journal of Materials Research, vol. 16, no. 12, pp. 3331–3334, 2001. View at Google Scholar · View at Scopus
  6. X. Quan, S. Yang, X. Ruan, and H. Zhao, “Preparation of titania nanotubes and their environmental applications as electrode,” Environmental Science and Technology, vol. 39, no. 10, pp. 3770–3775, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Liu, J. Li, B. Zhou et al., “Comparison of photoelectrochemical properties of TiO2-nanotube- array photoanode prepared by anodization in different electrolyte,” Environmental Chemistry Letters, vol. 7, no. 4, pp. 363–368, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. S. P. Albu, D. Kim, and P. Schmuki, “Growth of aligned TiO2 bamboo-type nanotubes and highly ordered nanolace,” Angewandte Chemie, vol. 47, no. 10, pp. 1916–1919, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Ji, K.-C. Lin, H. Zheng, J.-J. Zhu, and A. C. S. Samia, “Fabrication of double-walled TiO2 nanotubes with bamboo morphology via one-step alternating voltage anodization,” Electrochemistry Communications, vol. 13, no. 9, pp. 1013–1015, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Gong, C. Lin, M. Ye, and Y. Lai, “Enhanced photoelectrochemical activities of a nanocomposite film with a bamboo leaf-like structured TiO2 layer on TiO2 nanotube arrays,” Chemical Communications, vol. 47, no. 9, pp. 2598–2600, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Chen, K. Lu, and J. A. Geldmeier, “Highly ordered titania nanotube arrays with square, triangular, and sunflower structures,” Chemical Communications, vol. 47, no. 36, pp. 10085–10087, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Paulose, K. Shankar, S. Yoriya et al., “Anodic growth of highly ordered TiO2 nanotube arrays to 134 μm in length,” Journal of Physical Chemistry B, vol. 110, no. 33, pp. 16179–16184, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Xu, G. Vanamu, Z. Nie et al., “Photocatalytic oxidation of a volatile organic component of acetaldehyde using titanium oxide nanotubes,” Journal of Nanomaterials, vol. 2006, Article ID 78902, 8 pages, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Hosseini and M. Mohsen Momeni, “Preparation and characterization of TiO2 nanotubular arrays for electrooxidation of organic compounds: effect of immobilization of the noble metal particles,” International Journal of Modern Physics, vol. 5, pp. 41–48, 2012. View at Google Scholar
  15. T. A. Egerton, M. Janus, and A. W. Morawski, “New TiO2/C sol-gel electrodes for photoelectrocatalytic degradation of sodium oxalate,” Chemosphere, vol. 63, no. 7, pp. 1203–1208, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Selcuk and M. Bekbolet, “Photocatalytic and photoelectrocatalytic humic acid removal and selectivity of TiO2 coated photoanode,” Chemosphere, vol. 73, no. 5, pp. 854–858, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. S. Sohn, Y. R. Smith, M. Misra, and V. (Ravi) Subramanian, “Electrochemically assisted photocatalytic degradation of methyl orange using anodized titanium dioxide nanotubes,” Applied Catalysis B, vol. 84, no. 3-4, pp. 372–378, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. M. E. Osugi, M. V. B. Zanoni, C. R. Chenthamarakshan et al., “Toxicity assessment and degradation of disperse azo dyes by photoelectrocatalytic oxidation on ti/TiO2 nanotubular array electrodes,” Journal of Advanced Oxidation Technologies, vol. 11, no. 3, pp. 425–434, 2008. View at Google Scholar · View at Scopus
  19. J.-H. An and S. Dultz, “Adsorption of tannic acid on chitosan-montmorillonite as a function of pH and surface charge properties,” Applied Clay Science, vol. 36, no. 4, pp. 256–264, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Wang, A. Li, L. Xu, and Y. Zhou, “Adsorption of tannic and gallic acids on a new polymeric adsorbent and the effect of Cu(II) on their removal,” Journal of Hazardous Materials, vol. 169, no. 1–3, pp. 794–800, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Varanka, I. Rojik, I. Varanka, J. Nemcsók, and M. Ábrahám, “Biochemical and morphological changes in carp (Cyprinus carpio L.) liver following exposure to copper sulfate and tannic acid,” Comparative Biochemistry and Physiology C, vol. 128, no. 2, pp. 467–478, 2001. View at Google Scholar · View at Scopus
  22. B. O'Regan and M. Grätzel, “A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films,” Nature, vol. 353, no. 6346, pp. 737–740, 1991. View at Google Scholar · View at Scopus
  23. J. Wang and Z. Lin, “Freestanding TiO2 nanotube arrays with ultrahigh aspect ratio via electrochemical anodization,” Chemistry of Materials, vol. 20, no. 4, pp. 1257–1261, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. M. V. B. Zanoni, J. J. Sene, H. Selcuk, and M. A. Anderson, “Photoelectrocatalytic production of active chlorine on nanocrystalline titanium dioxide thin-film electrodes,” Environmental Science and Technology, vol. 38, no. 11, pp. 3203–3208, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. L. E. Fraga, M. A. Anderson, M. L. P. M. A. Beatriz, F. M. M. Paschoal, L. P. Romão, and M. V. B. Zanoni, “Evaluation of the photoelectrocatalytic method for oxidizing chloride and simultaneous removal of microcystin toxins in surface waters,” Electrochimica Acta, vol. 54, no. 7, pp. 2069–2076, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. B. Marselli, J. Garcia-Gomez, P.-A. Michaud, M. A. Rodrigo, and C. Comninellis, “Electrogeneration of hydroxyl radicals on boron-doped diamond electrodes,” Journal of the Electrochemical Society, vol. 150, no. 3, pp. D79–D83, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Murugananthan, S. S. Latha, G. Bhaskar Raju, and S. Yoshihara, “Role of electrolyte on anodic mineralization of atenolol at boron doped diamond and Pt electrodes,” Separation and Purification Technology, vol. 79, no. 1, pp. 56–62, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Li, D. Bejan, M. S. McDowell, and N. J. Bunce, “Mixed first and zero order kinetics in the electrooxidation of sulfamethoxazole at a boron-doped diamond (BDD) anode,” Journal of Applied Electrochemistry, vol. 38, no. 2, pp. 151–159, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Yoshihara and M. Murugananthan, “Decomposition of various endocrine-disrupting chemicals at boron-doped diamond electrode,” Electrochimica Acta, vol. 54, no. 7, pp. 2031–2038, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Szpyrkowicz, C. Juzzolino, S. N. Kaul, S. Daniele, and M. D. de Faveri, “Electrochemical oxidation of dyeing baths bearing disperse dyes,” Industrial and Engineering Chemistry Research, vol. 39, no. 9, pp. 3241–3248, 2000. View at Google Scholar · View at Scopus
  31. S. K. Bhargava, J. Tardio, J. Prasad, K. Föger, D. B. Akolekar, and S. C. Grocott, “Wet oxidation and catalytic wet oxidation,” Industrial and Engineering Chemistry Research, vol. 45, no. 4, pp. 1221–1258, 2006. View at Publisher · View at Google Scholar · View at Scopus